고차원 CMAC 문제의 소요 기억량 감축

권성규 한국지능시스템학회 1996 한국지능시스템학회논문지 Vol.6 No.3

In orde to reduce huge memory requirements of multidimensional CMAC problems, building a CMAC system by problem decomposition is investigated. Decomposition is based on resolving a displacement vector in cartesian coordinates into unit vectors that define a few lower-dimensional CMACs in the CMAC system. A CMAC system for an an in verse kinematics problem for a planar manipulator was simulated and the performance of the system was evaluated in terms of training and output quality.

공학설계에서 협동 글쓰기 가르치기

권성규 한국공학교육학회 2014 공학교육연구 Vol.17 No.1

This paper recommends to teach technical writing as a part of the curriculum of engineering design courses. Some features ofboth engineering design and keystone design course as well as capstone design course for engineering students are studied beforethe relationship of those features with written communication are investigated. After the characteristics of collaborative writing arereviewed, some aspects of integration of teaching technical writing into engineering design courses are evaluated. Technical writingfor engineering students is best taught by collaborative writing approach in engineering design courses.

[엔지니어와 글쓰기] 엔지니어들에게 글쓰기가 아주 중요하다

권성규 대한기계학회 2016 기계저널 Vol.56 No.3

공학글쓰기 이해

권성규 한국교양교육학회 2015 교양교육연구 Vol.9 No.2

Engineering students are to learn disciplinary writing course due to the curriculum for ABEEK. Many problems are reported with regard to teaching the writing courses for engineering students. First, what the disciplinary writing is studied. After discussing the characteristics of engineering, engineering design, and both engineering students and engineers in terms of writing education, the course objectives and contents are suggested. The features of technical writing helpful for developing the engineering writing course are summarized while the weakness of science writing in terms of teaching the engineering writing is noted. Then, the way of teaching the engineering writing in parallel with the engineering design course is discussed. In conclusion, the engineering writing should be taught so that students are able to deal with writing tasks while taking the Capstone Design course during the senior year. 공학교육인증제도의 시행으로 인해 공과대학 학생들은 기초글쓰기를 배운 후 전공글쓰기를 배우는데, 그 과목이 여러 면에서 부실하다는 지적이 많다. 전공글쓰기는 어떤 과목이어야 하는지에 대해 조사한 후, 글쓰기 교육의 관점에서 공학, 설계 및 공대생과 엔지니어의 특성들을 살펴서 공학글쓰기의 교육목표와 내용을 제시하고, 공학글쓰기 교육에 참고할 technical writing의 특성을 요약하며, 특히 공학글쓰기 관점에서 science writing의 문제점을 지적한 뒤, 공학글쓰기를 공학설계와 병행하여 가르치는 데 대해 토의하였다. 공학글쓰기는 캡스톤디자인을 이수하는 데 필요한 글말 의사소통 수요를 감당할 수 있는 기량을 기르는 것을 목표로 한다.

Recent advances in stem cell therapeutics and tissue engineering strategies

권성규,권양우,이태욱,박규태,김재호 한국생체재료학회 2018 생체재료학회지 Vol.22 No.4

Background: Tissue regeneration includes delivering specific types of cells or cell products to injured tissues or organs for restoration of tissue and organ function. Stem cell therapy has drawn considerable attention since transplantation of stem cells can overcome the limitations of autologous transplantation of patient’s tissues; however, it is not perfect for treating diseases. To overcome the hurdles associated with stem cell therapy, tissue engineering techniques have been developed. Development of stem cell technology in combination with tissue engineering has opened new ways of producing engineered tissue substitutes. Several studies have shown that this combination of tissue engineering and stem cell technologies enhances cell viability, differentiation, and therapeutic efficacy of transplanted stem cells. Main body: Stem cells that can be used for tissue regeneration include mesenchymal stem cells, embryonic stem cells, and induced pluripotent stem cells. Transplantation of stem cells alone into injured tissues exhibited low therapeutic efficacy due to poor viability and diminished regenerative activity of transplanted cells. In this review, we will discuss the progress of biomedical engineering, including scaffolds, biomaterials, and tissue engineering techniques to overcome the low therapeutic efficacy of stem cells and to treat human diseases. Conclusion: The combination of stem cell and tissue engineering techniques overcomes the limitations of stem cells in therapy of human diseases, and presents a new path toward regeneration of injured tissues.

Dependence of the 1/f Noise Characteristics of CMOSFETs on Body Bias in Sub-threshold and Strong Inversion Regions

권성규,권혁민,곽호영,장재형,신종관,황선만,성승용,이가원,이송재,한인식,정의선,이정환,이희덕 대한전자공학회 2013 Journal of semiconductor technology and science Vol.13 No.6

In this paper, the 1/f noise characteristics of n-channel MOSFET (NMOSFET) and p-channel MOSFET (PMOSFET) are analyzed in depth as a function of body bias. The normalized drain current noise, SID/ID2 showed strong dependence on the body bias in the sub-threshold region for both NMOSFET and PMOSFET, and NMOSFET showed stronger dependence than PMOSFET on the body bias. On the contrary, both of NMOSFET and PMOSFET do not exhibit the dependence of SID/ID2 on body bias in strong inversion region, although the noise mechanisms of two MOSFETs are different from each other.

CMAC의 S-to-M 변환을 위한 알고리즘

권성규,Gwon, Seong-Gyu 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.10

In order to develop an efficient algorithm for S-to-M mapping in CMCA, characteristics of CMCA mappings is studied and conceptual mapping procedure is physically described. Then, careful observations on the mapping procedure and experience reveal a simple algorithm of the S-to-M mapping. The algorithm is described and compared with other procedures for S-to-M mapping. It is found very efficient in terms of computational operations and processing time.

Fluorine 주입에 따른 NMOSFET의 소자 특성 연구

권성규,권혁민,이환희,장재형,곽호영,고성용,이원묵,이성재,이희덕,Kwon, Sung-Kyu,Kwon, Hyuk-Min,Lee, Hwan-Hee,Jang, Jae-Hyung,Kwak, Ho-Young,Go, Sung-Yong,Lee, Weon-Mook,Lee, Song-Jae,Lee, Hi-Deok 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.1

In this paper, we investigated the device performance on fluorine implantation, hot carrier reliability and RTS (random telegraph signal) noise characteristics of NMOSFETs. The capacitance of the fluorine implanted NMOSFET decreased due to the increase of the gate oxide thickness. RTS noise characteristics of the fluorine implated NMOSFET was improved approximately by 46% due to the decrease of trap density at Si/$SiO_2$ interface. The improved gate oxide quality also results in the longer hot carrier life time.

Role of stem cell mobilization in the treatment of ischemic diseases

권성규,Insoo Park,권양우,이태욱,Gyu Tae Park,Jae Ho Kim 대한약학회 2019 Archives of Pharmacal Research Vol.42 No.3

Stem cell mobilization plays important roles in the treatment of severe ischemic diseases, including myocardial infarction, limb ischemia, ischemic stroke, and acute kidney injury. Stem cell mobilization refers to the egress of heterogeneous stem cells residing in the bone marrow into the peripheral blood. In the clinic, granulocyte colony-stimulating factor (G-CSF) is the drug most commonly used to induce stem cell mobilization. Plerixafor, a direct antagonist of CXCR4, is also frequently used alone or in combination with G-CSF to mobilize stem cells. The molecular mechanisms by which G-CSF induces stem cell mobilization are well characterized. Briefly, G-CSF activates neutrophils in the bone marrow, which then release proteolytic enzymes, such as neutrophil elastase, cathepsin G, and matrix metalloproteinase 9, which cleave a variety of molecules responsible for stem cell retention in the bone marrow, including CXCL12, VCAM-1, and SCF. Subsequently, stem cells are released from the bone marrow into the peripheral blood. The released stem cells can be collected and used in autologous or allogeneic transplantation. To identify better conditions for stem cell mobilization in the treatment of acute and chronic ischemic diseases, several preclinical and clinical studies have been conducted over the past decade on various mobilizing agents. In this paper, we are going to review methods that induce mobilization of stem cells from the bone marrow and introduce the application of stem cell mobilization to therapy of ischemic diseases.

의사소통과 기술문 쓰기

권성규 한국교양교육학회 2013 교양교육연구 Vol.7 No.3

This work is about various communication elements and genre resources that should be utilized in order to produce successful technical writing that achieves the communication purposes. First of all, the possibilities of incomplete communication due to the lack of sentence writing ability or the influence of the circumstances of language events are reviewed. Before the visual communication is emphasized in view of conveying the meaning, some features of technical writing as well as technical communication are studied. After genre characteristics such as context, register, text, and discourse community are studied, some strategies for realizing them in text producing are discussed. In order to be able to write successful technical writing, the writers should be able to use various genre resources in text producing. 이 논문은 의사소통 목적을 달성하는 전문 주제에 관한 글을 쓰기 위해서 이용해야 하는 의사소통 요소들과 장르 자원들에 관한 것이다. 의사소통이 온전하지 못하게 되는 여러 원인들과 기술 의사소통과 기술문의 특성을 살핀 뒤, 전문 주제에 관한 의미 전달을 지원하는 시각 의사소통과 장르 자원으로서 맥락과 텍스트의 특성들을 조사하고, 그 자원들을 텍스트 생산에 반영하는 방안들을 토의한다. 의사소통 목적을 달성하는 기술문을 쓰기 위해서는 다양한 장르 자원들을 이용할 수 있어야 한다.