대장직장 종양에 대한 내시경 점막하 절제술의 연대순 임상 결과와 학습 곡선

이상민 ( Sang Min Lee ),김은수 ( Eun Soo Kim ),박경식 ( Kyung Sik Park ),조광범 ( Kwang Bum Cho ),김동춘 ( Dong Choon Kim ),강유진 ( Yu Jin Kang ),이유진 ( Yoo Jin Lee ),이정민 ( Jung Min Lee ),최은성 ( Eun Sung Choi ),최재혁 ( Ja 대한소화기학회 2014 대한소화기학회지 Vol.64 No.4

Background/Aims: Endoscopic submucosal dissection (ESD) is an effective procedure for en-bloc curative resection of the colorectal tumor. As it requires high technical skills and experience in therapeutic endoscopy, it is important to understand learning curve of ESD technique. The aim of this study was to retrospectively describe the clinical results of ESD and to evaluate learning curve for the ESD of colorectal tumors. Methods: A total of 90 patients with 90 colorectal neoplasms, who had undergone ESD at a tertiary referral hospital from July 2009 to December 2012, were enrolled. The ESD was performed by a single endoscopist. All ESD cases were divided into three periods: first, cases 1-30; second, cases 31-60; and third, cases 61-90. Results: The en-bloc resection rates in third period (100%) was significantly higher than that of the first (93.3%) and second period (80%) (p=0.025). The perforation rate in third period (0%) also significantly decreased compared with that of the first (13.3%) and second period (20%) (p=0.032). To calibrate the difference of tumor size among periods, proficiency was calculated, as the procedure time per specimen area (min/cm2). The proficiency in third period (4.3) was significantly shorter than that of the first (16.8) and second period (10.2) (p=0.004). Conclusions: The learning curve of colorectal ESD in our study shows that at least 60 cases of ESD have to be conducted to acquire sufficient skill of degree without perforation. (Korean J Gastroenterol 2014;64:198-205)

반응표면분석에 의한 노랑느타리버섯 추출물의 추출조건 최적화

이혜진(Hye-Jin Lee),도정룡(Jeong-Ryong Do),정민유(Min-Yu Chung),김현구(Hyun-Ku Kim) 한국식품영양과학회 2014 한국식품영양과학회지 Vol.43 No.10

노랑느타리버섯의 항산화 활성을 측정하여 효율적 추출조건을 예측하기 위해 마이크로웨이브 에너지, 에탄올 농도, 추출시간의 요인변수를 중심합성법에 따라 설정하여 반응표면분석을 통해 최적화 조건을 설정하였다. 노랑느타리버섯 추출물의 수율, 전자공여작용, SOD 유사 활성, 총 폴리페놀 함량에 대한 반응표면의 회귀식 R² 값이 각각 0.91, 0.87, 0.86 및 0.87로 분석되었고, 수율은 P<0.01, 항산화 활성이 P<0.05에서 유의적 수준을 나타냈다. 노랑느타리버섯은 요인변수에 따라 수율, 전자공여작용, 총 폴리페놀 함량의 경우 마이크로웨이브 에너지의 영향을 가장 많이 받았고, SOD유사 활성의 경우 에탄올 농도에 따른 유의적 차이를 보였다. 추출물의 각 특성을 모두 만족시키는 최적의 추출조건의 범위는 superimposing 하여 마이크로웨이브 에너지 71.48~92.84 watts, 에탄올 농도 55.01~71.66%, 추출시간 3~9분으로 예측되었다. Response surface methodology (RSM) was used to optimize extraction conditions of Pleurotus cornocopiae. Coefficients of determination (R²) for dependent variables ranged from 0.86 at 0.91. Maximum extraction yield was 40.81% under the following conditions: microwave power of 60.08 watts, ethanolic concentration of 12.33%, and extraction time of 6.86 min. Maximum extraction electron donating ability was 35.72% at 44.13 watts, 19.30%, and 4.21 min. Maximum extraction superoxide dismutase (SOD)-like activity was 34.87% at 114.01 watts, 65.88%, and 1.56 min. Maximum extraction total polyphenol content was 31.77 mg/g at 50.52 watts, 23.00% and 2.90 min. Based on the superimposition of four dimensional RSM with respect to extraction yield, electron donating ability, SOD-like activity, and total polyphenol content obtained under various extraction conditions, the optimum ranges of extraction conditions were as follows: microwave power of 71.48~92.84 watts, ethanol concentration of 55.01~71.66%, and extraction time of 3~9 min.

Effect of Chromatin Changes in the Germinal Vesicle on the Development of Porcine Embryos In Vitro

Min‐Gu Lee,Rong‐xun Han,Jin‐Yu zhang,Yun‐Fei Diao,Reza K. Oqani,Dong‐Il Jin 한국동물생명공학회(구 한국동물번식학회) 2011 발생공학 국제심포지엄 및 학술대회 Vol.2011 No.1

In all the studies of mammalian species, chromatin in the germinal vesicle (GV) is initially decondensed with the nucleolus not surrounded by heterochromatin (the NSN configurations). During oocyte growth, the GV chromatin condenses into perinucleolar rings (the SN configurations) or other corresponding configurations with or without the perinucleolar rings, depending on species. During oocyte maturation, the GV chromatin is synchronized in a less condensed state before germinal vesicle breakdown (GVBD) in species that has been minutely studied. As not all the species show the SN configuration and gene transcription always stops at the late stage of oocyte growth, it is suggested that a thorough condensation of GV chromatin is essential for transcriptional repression. Because the GV chromatin status is highly correlated with oocyte competence, oocytes must end the NSN configuration before they gain the full meiotic competence and they must take on the SN/corresponding configurations and stop gene transcription before they acquire the competence for early embryonic development. In this study, we firstly investigated whether the layer of cumulus cells and size of oocytes could determine chromatin configurations in porcine oocytes. Using Hoechst3342 staining, the GV nucleolus and chromatin of porcine oocytes was classified into SN and NSN configurations. Next, we examined the changes in GV chromatin configurations during growth and maturation of porcine oocytes. In addition, the maturation and parthenogenetic development abilities in vitro were significant different between the SN and NSN configurations oocytes. These results indicated that chromatin changes in GV oocytes affect the development potential of parthenogenetic embryos.

크론병에 대한 CoPPLX의 방어효과에 대한 연구

이호학,김유림,문창기,이재일,양병윤,김종수,이정민,정재혁,안석진,박상준,김윤권,김소연,김영중,조민구,최영자,장성조 圓光大學校 醫科學硏究所 2005 圓光醫科學 Vol.20 No.1

Reconstruction of Vascular Structure with Multicellular Components using Cell Transfer Printing Methods

Lee, Yu Bin,Jun, Indong,Bak, Seongwoo,Shin, Young Min,Lim, Youn-Mook,Park, Hansoo,Shin, Heungsoo Wiley (John WileySons) 2014 Advanced Healthcare Materials Vol.3 No.9

<P>Natural vessel has three types of concentric cell layers that perform their specific functions. Here, the fabrication of vascular structure is reported by transfer printing of three different cell layers using thermosensitive hydrogels. Tetronic-tyramine and RGD peptide are co-crosslinked to prepare cell adhesive and thermosensitive hydrogels. The hydrogel increases its diameter by 1.26 times when the temperature reduces from 37 C to 4 C. At optimized seeding density, three types of cells form monolayers on the hydrogel, which is then transferred to the target surface within 3 min. Three monolayers are simultaneously transferred on one substrate with controlled shape and arrangement. The same approach is applied onto nanofiber scaffolds that are cultured for more than 5 d. Every type of monolayer shows proliferation and migration on nanofiber scaffolds, and the formation of robust cell-cell contact is revealed by CD31 staining in endothelial cell layer. A vascular structure with multicellular components is fabricated by transfer of three monolayers on nanofibers that are manually rolled with the diameter and length of the tube being approximately 3 mm and 12 mm, respectively. Collectively, it is concluded that the tissue transfer printing is a useful tool for constructing a vascular structure and mimicking natural structure of different types of tissues.</P>

Effect of 840 nm light-emitting diode(LED) Irradiation on Monosodium Iodoacetate-Induced Osteoarthritis in Rats

( Hyun-ji Lee ),( Ha-nul Soe ),( Woo-bin Soel ),( Kyung-sun Soe ),( Jong-won Ju ),( Hae-sung Lee ),( Ung-bae Park ),( Min-suk Yu ),( Ji-hyun Lee ) 대한임상병리사협회 2013 조직세포검사학회 발표자료집 Vol.2013 No.-

Background The objective of this study was to evaluate whether 840 nm light-emitting diode (LED) could be effective in a noninvasive, therapeutic device for the treatment of monosodium iodoacetate-induced osteoarthritis in rats. Method Twenty male Sprague-Dawley rats weighing approximately 200 g each were divided into four groups: control group (C); monosodium iodoacetate-treated(MIA) group; monosodium iodoacetate-treated(MIA) group with LED phototherapy(MIA-LED); indomethacin-treated group(IMT). Osteoarthritis(OA) was induced by intra-articular injection of 50 μl of 3 mg MIA through the patellar ligament of the right knee. Control rats were injected with an equivalent volume of saline. In the MIA-LED group, the animal knees were exposed to LED stimulation at intervals of 15 min/day, for 1 weeks after MIA treatment. Animals were sacrificed at 2 weeks postoperatively. Knee joints were removed and fixed overnight in 10% neutral buffered formalin and subsequently decalcified by EDTA for 2 wk before being embedded in paraffin. Frontal sections (4 μm thick) of the medial aspect of the rat knee joints were prepared every 250 μm. The OA clinical score was monitored by knee movement and by radiographic analyses. Histologic analyses were performed following staining with hematoxylin and eosin, Safranin O-fast green, or toluidine blue, and histologic changes were scored according to a modified Mankin system. Results Radiographic examination showed no differences between the MIA-treated and the MIA-LED-treated rats. Sclerotic regions adjacent to the tibioepiphyseal margin, thinning of the epiphysis, and a small exophite were evident in the MIA-treated and the MIA-LED-treated rats, whereas tibioepiphyseal margin was well preserved in the IMT-treated rats compared with the two groups. Histologically, the lesion severity of knee joint by Mankin``s scoring showed not a significant difference between the MIA-treated and the MIA-LED-treated rats, however the lesion score was significantly decreased in the IMT rats compared with the two groups. Discussion The irradiation of LED at 840 nm after monosodium idoacetate treatment was no significant difference between the respective arthritis parameters in LED-treated group compared with indomethacin-treated group. However, the total Mankin score was significantly decreased in MIA-LED-treated group compared with monosodium iodoacetate-treated group. These results indicate that LED phototherapy was some beneficial influence on the repair of chondral lesion in osteoarthritis rats.

AISI1045 기계구조용 탄소강의 질화 가스분위기에 따른 화합물층의 형성 및 조직변화

이원범 ( Won-beom Lee ),유광춘 ( Kwang-chun Yu ),김영민 ( Young-min Kim ),위재용 ( Jae-lyoung Wi ) 대한금속재료학회(구 대한금속학회) 2016 대한금속·재료학회지 Vol.54 No.7

Compound layers developed at 520 ℃ during gaseous nitriding of AISI 1045 steels were investigated. The nitriding potential (Kn) of a gas atmosphere of dissociating ammonia gas was checked by observation of the partial pressure of hydrogen gas. The microstructural evolution of the compound layer was studied by using optical microscopy and scanning electron microscopy. It was observed that the surface hardness was about 600 Hv after the nitriding treatment and the case depth was about 0.5mm after a nitriding treatment of 1440 min. The compound layer was composed of  ′(Fe4N) and ε(Fe2-3N). The thickness of the compound layer was simultaneously increased to 16 μm during the nitriding treatment of 1440 min. The kinetics of the compound layer growth were discussed with a modified Lehrer diagram of AISI 1045 steels, which was obtained from the thermodynamic calculation. †(Received January 15, 2016; Accepted March 2, 2016)

저온 플라즈마 처리한 쌀국수의 품질 특성

김현주(Hyun-Joo Kim),이병원(Byong Won Lee),백기호(Ki Ho Baek),조철훈(Cheorun Jo),김재경(Jae-Kyung Kim),이진영(Jin Young Lee),이유영(Yu-Young Lee),김민영(Min Young Kim),김미향(Mi Hyang Kim),이병규(Byoungkyu Lee) 한국식품과학회 2020 한국식품과학회지 Vol.52 No.5

쌀국수의 유통 안전성 확보를 위한 기초자료를 확보하기 위하여 최근 각광받고 있는 저온 플라즈마 처리에 의한 쌀국수의 품질 특성 분석을 하였다. 본 연구에서 이용한 플라즈마는 컨테이너형 유전격벽 플라즈마로 방전 가스는 공기를 활용하여 0, 5, 10 및 20분 처리하였고 미생물 감균효과, 색도, 경도 및 지질산패도 변화를 측정하였다. 쌀국수에 B. cereus 및 E. coli O157:H7을 접종한 후 20분간 플라즈마 처리 시 E. coli O157:H7은 2.75 log CFU/g 감소하였고, B. cereus는 검출되지 않았다. 색도 측정결과 플라즈마 처리에 의해 명도(L<SUP>*</SUP>), 적색도(a<SUP>*</SUP>) 및 황색도(b<SUP>*</SUP>) 모두 증가하였으며, 경도는 처리시간이 증가함에 따라 감소하는 경향을 보였다. 하지만 플라즈마 처리에 의해 지질산화가 일어나는 경향을 보였다. 따라서 공기로 방전된 저온 플라즈마 기술은 쌀국수의 품질안전성을 개선될 것이라고 판단되나 관능적 품질 특성 개선을 위한 적합 플라즈마 모델 선정, 포장방법 개선 등의 후속연구가 필요하다고 판단된다. Cold plasma has been applied to improve quality of food product; however, studies on its effects on microbial and physicochemical qualities of rice noodles are rarely conducted. In this study, changes in the quality characteristics of rice noodles treated by cold plasma were determined. Cold plasma was generated in a square-shaped plastic container (250 W, 15 kHz, ambient air), and dielectric barrier discharge plasma treatments were applied to rice noodle samples for 0, 10, or 20 min. Rice noodles inoculated with either Bacillus cereus or Escherichia coli O157:H7 were subjected to plasma treatment for 20 min, and the approximate bacterial count reduction were 4.10 and 2.75 log CFU/g, respectively. The Hunter color values of the sample were increased after cold plasma treatment. Peroxide values and thiobarbituric acid reactive substance (TBARS) were increased with an increase in cold plasma treatment time. Futhermore, lipid oxidation was enhanced. Although further studies are warranted to evaluate changes in chemical qualities, such as lipid oxidation of rice noodles, induced by cold plasma, the results suggest that cold plasma can improve the microbial and physical qualities of rice noodles.

다양한 전처리 방법에 따른 양파의 이화학 및 영양학적 특성 분석

김광일 ( Kwang Il Kim ),황인국 ( In Guk Hwang ),유선미 ( Seon Mi Yu ),민상기 ( Sang Gi Min ),이상윤 ( Sang Yoon Lee ),최미정 ( Mi Jung Cho ) 한국산업식품공학회 2014 산업 식품공학 Vol.18 No.4

본 연구는 양파를 열처리 법 중에서 열수침지, 증기 및 볶음 처리에 따른 이화학적 및 영양학적 특성을 분석한 논문으로 열처리가 양파에 미치는 영향을 비교하고자 하였다. 상품을 구매할 때 1차적인 구매요소인 색도 및 경도측정과 추가적으로 pH와 조직관찰 결과로 최적조건 선정 후 영양학적 및 미생물 검사를 실시하였다. 열처리를 하지 않은 대조구에 비해 짧은 시간의 열처리에서는 더 진하고 선명한 색을 띠었으나, 장시간동안 처리한 열처리 시료는 색의 침착을 보였다. 원물과 처리구의 색은 열처리 시간에 따라 뚜렷한 차이를 나타냈고, 경도는 열처리 시간에 따라 짧은 시간에서는 분해효소의 불활성화로 유지 및 증가했지만, 3분 이상 처리하였을 때는 감소 경향을 나타냈고, 볶음처리는 짧은 시간으로도 물성이 연화됐다. 비타민은 열수 및 증기처리 1~2분 처리는 14% 정도 감소했지만 그 이상 처리 시에는 23~28% 범위로 큰 감소율을 보였으며, 유리당 및 유기산의 경우 열수침지 및 증기처리에서 손실을 보였지만, 볶음처리에서는 유지하거나 증가하는 경향을 나타냈다. 특히 유리당에서 열수침지 처리 시 높은 감소율을 나타냈다. Peroxidase activity 변화는 모든 처리구에서 75% 이상의 불활성화를 나타냈고, 특히 열수침지 및 증기 처리한 모든 시료에서 90% 이상의 불활성화를 나타내며 볶음처리보다 높은 불활성화율을 보였다. 미생물 측정한 결과 열수 침지 3분 이상 및 볶음처리 210초 이상 처리시 미생물 검출이 안됐으며, 증기처리 시료는 2분 처리만으로 사멸된 것을 관찰했다. 양파의 열처리 조건은 증기처리법으로 2분 동안 처리하는 것이 다른 처리법에서 처리한 시간들에 비해 최적으로 나타났다. 열처리 방법 별 각각의 최적 처리 시간을 가지고 있어, 높은 효율성이나 산업적으로 이용하려면 최적의 전처리 방법과 처리 시간을 산정하는 것이 중요하다. The pre-thermal treatment, or blanching, is an important process to minimize quality changes during main cooking or storage. In this study, three types of pre-thermal treatments were applied to onions to observe quality changes in their physicochemical, nutritional, and microbial properties. The washed and sliced onions were treated by hot-water immersion (100oC, 1~10 min), steaming (100oC, 1~10 min) and stir-frying with oil (180oC, 10~80 sec). The onions were cooled and wiped with gauze. The results showed that the total color difference of the treated sample increased to 18-23 units compared to that of the fresh control. The pH value of the onion was not significantly different with the exception of the stir-fried samples. The hardness of the onion tended to decrease depending on the treatment time. The micro-structures of onions treated by hot-water immersion and steaming were damaged above 2 min whereas stir-fried onions showed structural damage above 210 sec. In the analysis of the nutritional changes in the onion, the ascorbic acid content of the blanched treatments were lower than that of fresh onion and the free sugar contests showed a similar pattern excluding the stir-fried onions. In the organic acid content assay, the succinic acid content of the treated onion sample had significantly decreased compared with other organic acid contents (p<0.05). The peroxidase activities of the blanched treatments by hot-water immersion and steaming were inactivated by more than 92%, whereas only 76% inactivity was achieved by the stir-frying treatment. The mesophilic and psychrotrophic bacteria counts of the treated onion were not detected or decreased to near a 3-log scale, and yeast was detected only the sample treated by the stir-frying for 1 min. In particular, neither bacteria nor yeast counts in all onion samples by steam treatment were detected. Consequently, the results demonstrated that steam treatment for 2 min could be the optimal pre-thermal condition for onions to minimize the quality changes and increase safety.

소동물 폐종양의 정량적 개선을 위한 내부 움직임 평가

유정우,우상근,이용진,김경민,김진수,이교철,박상준,유란지,강주현,지영훈,정용현,김병일,임상무,Yu, Jung-Woo,Woo, Sang-Keun,Lee, Yong-Jin,Kim, Kyeong-Min,Kim, Jin-Su,Lee, Kyo-Chul,Park, Sang-Jun,Yu, Ran-Ji,Kang, Joo-Hyun,Ji, Young-Hoon,Chung, Y 한국의학물리학회 2011 의학물리 Vol.22 No.3

이 연구에서는 폐종양의 정량적 개선을 위하여 분자체를 이용하여 내부 움직임을 측정하고 평가된 데이터를 기반으로 소동물 PET 영상내의 폐종양을 국소화하고자 하였다. 소동물 폐 영역의 내부 움직임은 방사성물질을 흡착한 분자체를 이용하여 소동물 폐 영역에 부착함으로써 구현하였다. 폐 영역의 내부 움직임 표적으로 사용된 분자체는 약 37 kBq의 Cu-64를 흡착시켜 폐종양을 모사하였다. 소동물 PET 영상은 Siemens Inveon 스캐너를 이용하여 획득하였으며 외부 움직임 데이터는 트리거 생성 장치인 BioVet을 이용하였다. SD-Rat PET 영상은 $^{18}F$-FDG 37 MBq/0.2 mL을 미정맥으로 주사하고 60분 후 20분간 데이터를 획득하였다. 리스트모드 데이터의 각 선응답은 외부 트리거 장치에 의해 획득된 트리거신호를 이용하여 2 bin에서 16 bin으로 사이노그램을 획득하였다. 획득된 사이노그램 데이터는 OSEM 2D 알고리즘을 이용하여 4회의 반복으로 재구성하였다. 종양의 정량적 분석을 위한 PET 영상은 종양을 묘사한 분자체 영역에 관심영역을 설정하고 계수와 SNR 그리고 FWHM을 이용하여 평가하였다. 움직임 표적으로 사용된 분자체의 크기는 $1.59{\times}2.50mm$이었으며, 기준 영상으로 획득한 체외 분자체 수직 및 수평 FWHM은 $2.91{\times}1.43mm$이었다. 정적영상과 4 bin 그리고 8 bin 영상에서의 수직 FWHM은 각각 3.90 mm, 3.74 mm, 3.16 mm이었으며 수평 FWHM은 각각 2.21 mm, 2.06 mm, 1.60 mm이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 계수 값은 각각 4.10, 4.83, 5.59, 5.38, 5.31이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 SNR은 4.18, 4.05, 4.22, 3.89, 3.58이었다. FWHM은 게이트 수의 증가에 따라 계속 향상됨을 확인하였다. 그러나 계수 값과 SNR은 게이트 수의 증가에 따라 계속 향상되지 않고 특정 bin 수에서 가장 높은 값을 보여 소동물 폐 영역에서의 종양 영상화시 SNR의 손실을 최소화하면서 향상된 계수 값을 얻을 수 있는 게이트 수를 획득하였다. 내부 움직임 측정은 최적화된 종양 국소화 영상을 획득할 수 있으며 외부 움직임 모니터링 시스템을 사용하지 않고 장기별 움직임 예측 모델링을 위한 유용한 방법이 될 것으로 기대된다. The purpose of this study was to estimate internal motion using molecular sieve for quantitative improvement of lung tumor and to localize lung tumor in the small animal PET image by evaluated data. Internal motion has been demonstrated in small animal lung region by molecular sieve contained radioactive substance. Molecular sieve for internal lung motion target was contained approximately 37 kBq Cu-64. The small animal PET images were obtained from Siemens Inveon scanner using external trigger system (BioVet). SD-Rat PET images were obtained at 60 min post injection of FDG 37 MBq/0.2 mL via tail vein for 20 min. Each line of response in the list-mode data was converted to sinogram gated frames (2~16 bin) by trigger signal obtained from BioVet. The sinogram data was reconstructed using OSEM 2D with 4 iterations. PET images were evaluated with count, SNR, FWHM from ROI drawn in the target region for quantitative tumor analysis. The size of molecular sieve motion target was $1.59{\times}2.50mm$. The reference motion target FWHM of vertical and horizontal was 2.91 mm and 1.43 mm, respectively. The vertical FWHM of static, 4 bin and 8 bin was 3.90 mm, 3.74 mm, and 3.16 mm, respectively. The horizontal FWHM of static, 4 bin and 8 bin was 2.21 mm, 2.06 mm, and 1.60 mm, respectively. Count of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.10, 4.83, 5.59, 5.38, and 5.31, respectively. The SNR of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.18, 4.05, 4.22, 3.89, and 3.58, respectively. The FWHM were improved in accordance with gate number increase. The count and SNR were not proportionately improve with gate number, but shown the highest value in specific bin number. We measured the optimal gate number what minimize the SNR loss and gain improved count when imaging lung tumor in small animal. The internal motion estimation provide localized tumor image and will be a useful method for organ motion prediction modeling without external motion monitoring system.