Oil Contents and Fatty Acid Composition of Korean Perilla (Perilla ocimoides L.) Collections

Hong,Seong-Taek,Son,Suk-Yeong,Jong,Seung-keun,Rho,Chang-Woo,Yun,Jong-Sun 한국자원식물학회 2003 Plant Resources Vol.6 No.3

This study was carried out to obtain informations on the variations of oil content and fatty acid composition among 90 Korean perilla collections. Average oil content of 90 perilla collections was 44.2% with a range from 29.7% to 61.9%. Perilla collections with late-maturing, super-large seed and gray seed coat showed higher oil content than other types in general. Average saturated fatty acid content in perilla oil was 9.0% with a range from 8.2% to 10.7%, while average unsaturated fatty acid content varied from 89.3% to 91.8% with a mean of 91.0%. Contents of saturated and unsaturated fatty acids were not related to maturity. There were no differences in the contents of saturated and unsaturated fatty acids according to maturity. Linoleic acid and linolenic acid contents were the highest in the super large-sized group(15.5%) and in the large-sized seed group(61.4%), respectively, while contents of fatty acids among the perilla collections were variable with different seed coat colors. Most of the traits studied were not significantly correlated with oil content, but linoleic acid($\omega$ 수식 이미지-6) content was negatively correlated (r=-0.217*) with linolenic acid(ω-3) content.

연령증가에 따른 혈압요소들의 좌심실비대 및 관동맥질환과의 관련성

박재석,박창규,박미영,박재형,김용현,나진오,신성희,서순용,홍순준,박성미,임홍의,김응주,서홍석,오동주,노영무 대한순환기학회 2004 Korean Circulation Journal Vol.34 No.2

김치에서 분리한 Lactobacillus sp. JC-7과 Lactobacillus acidophilus 88간의 Electrofusion 최적조건 설정

조영배,최현정,백형석,전홍기 부산대학교 유전공학연구소 1997 분자생물학 연구보 Vol.13 No.-

김치 발효 숙성기간을 연장하고 신선도를 오랫동안 유지 할 수 있는 김치발효 starter의 개발을 목적으로 최적숙성기에 있는 김치로부터 bacteriocin생성능이 없는 유산균을 분리하여 동정하였으며, bacteriocin생성능이 우수한 L.acidophilus 88을 융합시키기 위해 electrofusion에 대한 최적 조건을 검토하였다. 분리균주는 Lactobacillus속으로 동정되어 Lactobacillus sp. JC-7이라 명명하였다. Electrofusion에 의해 생성된 융합주를 식별하기 위해 streptomycin(2.5㎎/ml)에 내성을 나타내는 Lactobacillus sp. JC-7변이주와 kanamycin(600㎍/ml)에 내성을 나타내는 L.acidophilus 88변이주를 분리하였다. Electrofusion을 100V/㎝, 120msec(72ohms,1670 capacitance) 에서 수행했을 때 융합효율이 가장 양호하였으며 전기장의 세기와 시간이 중가할수록 융합 효율이 현저히 감소하였다. 2가 양이온은 농도가 중가할수록 대체적으로 융합효율을 감소시키는 경향을 나타내었으나 1mM MGCl_2에서는 대조군에 비해 융합효율이 약간 증가하였다. PEG매개에 의한 융합법의 융합효율을 비교한 결과, 융합효율은 chemical fusion<electrofusion<electrofusion+20% PEG순을 나타내었다. Evaluation of Optimum Conditions for the Electrofusion between Lactobacillus sp. JC-7 Isolated from Kimchi and Lactobacillus acidophilus 88. Young-Bae Jo, Hyun-Jung Choi, Hyung-Suk Baik and Hong-Ki Jun*. Department of Microbiology, Pusan National University, Pusan 609-735,Korea-A lactic acid bacterium was isolated from kimchi. The isolated strain was identified as the genus Lactobacillus thrugh its morphological characteristics and named as Lactobacillus sp. JC-7. The optimum conditions for the electrofusion between streptomycin(2.5㎎/ml)resistant mutant of Lactobacillus acidophilus 88 and kanamycin(600㎍/ml) resistant mutant Lactobacillus sp. JC-7 were evaluated. The highest number of fusants were obtained at a capacitance value of 120msec(1670㎌), a field strength of 100V/㎝,and a pulse controller setting of 72Ω. The potimum pH of elecroporation buffer was 7.5 and the concentration of divalent cation was 1mM MG^2+. Electrofusants were efficiently obtained by addition 20% polyethylene glycol to electroporation buffer. The yield of fusion was better than that of using polyethylene glycol mediated chemical induction.

콩의 식품적 의의 및 생산수급과 식용콩의 자급 향상

이홍석,이영호,이석하 대한민국 학술원 2011 학술원논문집 : 자연과학편 Vol.50 No.2

콩은 단백질 공급을 비롯하여 영양가가 높아 예로부터 우리의 중요 식품으로 널리 다양하게 이용하여 왔을 뿐 아니라 지속적인 밭작물 재배를 가능케 하는 중요한 역할을 하여 왔으며, 최근에는 건강식품으로 또 친환경 농업 작물로 주목을 받고 있다. 콩은 세계적으로 99,501천ha에서 223,185천톤(2,243kg/ha)이 생산되고 그의 35.5% (35,130백만불)가 수출되고 그 중 43%는 미국 콩이, 96.5%는 미대륙 생산 콩이 수출되고 있으며, 수입의 반 정도는 중국이, 37.6% 정도는 유럽의 선진국과 일본 등 10여 개국에서 각각 수입하고 있고, 우리나라도 10번째의 수입국이며 세계적 소비수요는 계속 증가되고 있다. 우리나라는 1968년의 313,501ha의 재배에서 계속 감소하여 현재는 75,242ha에서 132,674톤이 생산되고 1,261천톤이 수입되었으며, 전체 자급률은 수요량 1,333천톤의 8.6%, 식용 및 기타는 수요량 387천톤의 29.5%에 불과하다. 콩, 특히 식용콩의 증산에 의한 자급율 향상은 경지정리 및 주산단지 조성을 통한 생력기계화 재배를 전제로 첫째, 밭의 작부체계 개선 둘째, 논의 밭 전환재배 셋째, 북한의 동해안 지대의 밭을 장기임대하여 재배하고 그 대가를 쌀 지원으로 하는 것이며 넷째는 인접국에서 밭을 매입 또는 장기 임대하여 생산 공급하는 방법 등을 생각할 수 있을 것이다.

전압제어형 DC/DC Converter의 평균 모델을 위한 Duty Cycle 모델

홍성수,사공석진,안현식 국민대학교 생산기술연구소 2002 공학기술논문집 Vol.25 No.-

The conventional average model for a pulse width modulator employed in a voltage-mode-controlled pulse width modulated converter tends to be numerically unstable when the on-time duty ratio becomes sufficiently small. This paper presents a new average model for a voltage-mode control modulator that is not susceptible to such numerical problems. The validity of the proposed model is confirmed with cycle-by-cycle simulations using an exact discrete-time model.

디자인 전략에 있어서 '품질기능전개'와 '제조를 위한 디자인'의 역할 및 제품개발법의 선택

洪奭基 건국대학교 사회정책연구소 1998 사회과학연구 Vol.9 No.-

熱硬化性樹脂材料의 射出成形에 關하여

洪錫杓 全北大學校 1972 論文集 Vol.14 No.-

In this report, some problems on mold design and processing factors in injection molding of thermoset materials were investigated. Especially, the effect of residence time at constant temperature on flow at a constant pressure and the effect of injection pressure on flow with a constant residence time at constant temperature were examined. The results were obtained by a special test mold using phenolic, urea, melamine resin prepared by experimental methods. If barrel temperature, injection pressure and speed, and mold temperature are controlled properly, the injection molding can be used itself as a sound economical process.

수학교육에서 이해력 심도의 측정과 방법

홍석강 東國大學校 敎育問題硏究所 1988 교육문제연구 Vol.5 No.-

In this paper we dicussed that the criterion referenced measurment was the optimal test that could be assessed the various areas of mathematical ability and deepened in particular, the understanding ability in mathematical problem solving and various types of test forms of testing into assessment of a basic university mathematics using examples of logic problems were represented as an account of introduction of multiple choice and other forms of objective testing.

생약추출물이 초기우식법랑질의 재광화에 미치는 효과

홍석진,손재범,박근형 대한구강보건학회 2003 大韓口腔保健學會誌 Vol.27 No.2

Since plant extracts have shown antibacterial activities, we hypothesized that herbal plant extracts would further increase cariostatic efficacies of the fluoride dentifrices.OBJECTIVE: The purposes of this study were to determine the minimum inhibitory concentration(MIC) of 9 different Korean herbal plants extracts on the S.sobrinus KCTC3308 and the efficacy of NaF-Silica dentifrices with or without the extracts. METHODS; The MIC of the methanol-extracts on the growth of S.sobrinus was determined. Subsurface caries lesions were prepared as previously described (Hong et al.J Dent Res. 77:843, 1998). After Vickers hardness number(VHN) were determined, the specimens were assigned to 9 test groups of 12 each by randornized blocks with VHN stratification. The specimens were tested for remineralization In vitro subsurface enamel lesion under cyclic microbial dynamic condition simulating in vivo carious fomation. The statistical significance of delta VHNs was determined by Students t-test and one-way ANOVA. RESULTS: The MIC of the Angelica gigas extract was 3 ㎎/㎖, as same as Akebia quinata and Camellia sinensis was 4 ㎎/㎖. However, all 9 extracts tested in the study demonstrated the synergistic cariostatic potential with known fluoride dentifrices. CONCLUSION: The NaF-herbal extract in silica base dentifrice significantly increased the cariostatic effect of NaF-Silica base dentifrice.

벽시계틀 소재로 사용되는 목재와 플라스틱의 접착력 향상에 관한 연구

洪錫杓,崔相久,金鍾石 全北大學校 1991 論文集 Vol.33 No.-

Wood and plastic were used as elemental materials of the frame of clock. In this research, it was studied to improve adhesive strength between this materials by new adhesion process. Vinyl or acryl emulsion(H-403, H-422, Y-840, Y-850) was used as the adhesive. The adhesive properties was tested experimantally on various partial process including sanding, cleaning of sanded surface and pressing of bonded areas. The results obtained in this experiments were follows : 1) Y-850 represented most excellent adhesive properties. 2) The maximum of adhesive strength could be obtained by sanding with sand paper #600, pressing of 0.3∼0.5kg/㎠, and cleaning with acetone. In that case, increase of 20% in adhesive strength was showed than obtained by traditional process.