http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신선가공 고탄소 강선에서의 시효현상과 딜라미네이션 발생간의 상관관계 고찰
이중원(J. W. Lee),이종철(J. C. Lee),강의구(U. G. Gang),이용신(Y. S. Lee),박경태(K. T. Park),남원종(W. J. Nam) 한국소성가공학회 2009 한국소성가공학회 학술대회 논문집 Vol.2009 No.5
The effects of annealing temperature and time on mechanical properties and microstructures were already investigated in cold drawn pearlitic steel wires. During annealing, the increment of the tensile strength at low temperatures found to be due to age hardening, while the decrease in the tensile strength at high temperatures was attributed to age softening, involving the spheroidization of lamellar cementite and recovery of lamellar ferrite. Since Between increase of tensile strength and the occurrence of the delamination would be closely related to the dissolution of cementite, the increase of drawing strain by lower annealing temperature caused the between higher tensile strength and the easier occurrence of the delamination in cold drawn pearlitic steel wires.
손원희(W.H Sohn),최진환(J.H. Choi),이순걸(S.G Lee),박동창(D.C. Park),류한식(H.S. Ryu),배대성(D.S. Bae),허건수(K.S. Huh) 한국자동차공학회 2001 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2001 No.5_2
An experimental study of dynamic track tension for high mobility tracked vehicle is investigated and compared to multibody dynamic simulation model. This research focuses on a heavy military tracked vehicle which has sophisticated suspension and rubber bushed track systems in computer model of the track tension. In order to obtain accurate dynamic track tension of track subsystems, each track link is modeled as a body which has six degrees of freedom. A compliant bushing element is used to connect track links. Various virtual proving ground models of Chang-Won proving ground are developed to observe dynamic changes of the track tension. The obtained empirical results of the dynamic track tension are comparcd against the simulation studies. <r.B.7]~%<>1 : Tracked Vehicle{;>~£,"j-"J), Trnck Link(;>~£"83), Dynamic Trnck Tension(%"'1 ;>~£"J-;;:j), Compliant Bushing (%<;! .!J!.>-J), DTJS("J-;;:j ~;;<.j A16 ',iJ)
파력발전 통합성능평가를 위한 WECAN 프로그램 개발방향 고찰
박지용(J.Y. Park),김경환(K.H. Kim),하윤진(Y.J. Ha),박세완(S.W. Park),김길원(K.W. Kim),김정석(J.S. Kim),이정희(J.H. Lee),오재원(J.W. Oh),노찬(C. Roh),최장영(J.Y. Choi),장강현(G.H. Jang),천호정(H.J. Cheon),김재환(J.H. Kim) 한국해양환경·에너지학회 2020 한국해양환경·에너지학회 학술대회논문집 Vol.2020 No.7
본 연구에서는 대표적인 파력발전장치 형태인 진동수주형과 가동물체형 파력발전장치를 대상으로 파력발전 통합성능 평가를 위한 WECAN프로그램 개발에 관한 연구를 수행하였다. 파력발전장치 개발을 위해 각 설치환경을 고려하여 적절한 설계를 진행하고 해당 설계안에 대해 발전성능과 안전성을 평가하게 되는데, 기존 연구에서 각 에너지변환단계를 서로 구분하여 해석함으로써 해당 시뮬레이션 결과가 에너지변환단계가 종합하여 연동된 실험 및 실증시험 결과와 차이를 보여 왔다. 따라서 이러한 문제점을 극복하기 위해 파력발전장치를 시스템기술로 접근하여 각 에너지변환단계를 통합하여 해석하고, 최적설계와 최적제어방안 도출을 위해 WECAN(Wave Energy Converter ANalysis) 프로그램을 개발하려 한다. 본 연구를 통해 WECAN 프로그램 개발을 위한 각 에너지변환단계별 해석기술과 단계별 개발방향을 설명하며, 적용 범위와 구현방안에 대해 언급하였다. 해당 프로그램의 연구개발 이후 단계별로 WECAN-DO, WEC-HILS 등의 프로그램을 개발할 예정이며, 이를 통해 국내 파력발전장치 성능평가 및 설계기술을 한 단계 끌어올리고, 앞선 기술을 통해 파력발전장치의 상용화를 선도하려 한다. In this study, we conducted a study on the development of the WECAN program for the integrated performance analysis of wave energy converter for both the oscillating water column type and activated-body type. The design of wave energy converters is conducted considering each installation environment and then, the power generation performance and safety analysis for the design are evaluated. In this process, existing studies have been analyzed by classifying each energy conversion step by step, and have shown differences from experimental and open sea test results. Therefore, in order to overcome this problem, we are developing a WECAN (Wave Energy Converter ANalysis) program by conducting integrated performance analysis approaching the wave energy converter as a system technology and we will derive an optimal design and an optimal control plan for the wave energy converter. In this study, the analysis technology for each energy conversion step and the development direction for each step are described for the WECAN program, and the application scope and implementation plan are mentioned. We also plan to develop WECAN-DO, WEC-HILS and other programs step by step after the R&D of this program. As a result, the performance evaluation and design technology of the domestic wave energy converter will be taken to the next level, and the commercialization of the wave energy converter will be led by these leading technologies.
유병우(B.W. Ryu),한정만(J.M. Han),이동욱(D.W. Lee),이종달(J.D. Lee),이병희(B.H. Lee),최성욱(S.W. Choi),문건우(G.W. Moon) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.1
최근 LCD 모니터, Note PC, 가정용 게임기, Mobile Phone, MP3 등의 소형 전자 제품의 사용이 증가함에 따라 이들 전자제품의 전원 공급에 필요한 다양한 AC/DC 어댑터가 요구된다. AC/DC 어댑터는 밀폐형의 구조를 가지므로, 열적인 문제 때문에 용량과 사이즈가 제한되어 왔다. 하지만 최근에는 소형전자제품의 용량이 점차 증가하고, 더불어 소비자의 휴대성 및 심미적 요구에 부응하기 위하여 소형 및 경량의 고밀도 AC/DC Adapter를 개발하여야 한다. 이를 위해서 높은 수준의 회로 설계 및 방열 기술이 필요하다. 본 논문에서는 Laptop PC에 적용되는 85W급 AC/DC Adapter용 고밀도전원을 개발하고 실험으로 검증하였다.