http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전통누룩 진균류를 이용한 입국의 제조 및 입국곰팡이의 동정
김재호 ( Jae Ho Kim ),권영희 ( Young Hee Kwon ),이애란 ( Ae Ran Lee ),김혜련 ( Hye Ryun Kim ),안병학 ( Byung Hak Ahn ) 한국균학회 2012 韓國菌學會誌 Vol.40 No.4
다양한 향미를 가진 막걸리의 개발을 위해 전통누룩으로부터 분리한 곰팡이로 입국을 제조한 후 품질특성을 분석하여 입국의 규격에 적합하며 이취가 없고 관능이 우수한 9균주를 입국 제조용 우수균주로 최종 선발하였다. 선발된 균주는 Aspergillus oryzae(C1-5-2-2, C20-7-3, CN1.3.1-4, CN16.19.1-1, N152-1, N220-1), Mycocladus corymbiferus (N162-2), Rhizopus oryzae(N20), Lichtheimia corymbifera (N21)로 동정되었으며, 제조한 입국의 산도는 5.0~6.8, 당화력은 128~241sp이었다. Various koji were prepared by fungi isolated from traditional nuruk and their quality characteristics were investigated. Acidity and saccharification power of their koji were ranged in 5.0~6.8 and 128sp~241sp. Nine fungi which were showed good quality and sensory evaluation were identified by analysis of their nucleotide sequences with PCR-amplified 18S rDNA internal transcribed spacer-1(ITS-1) and ITS-4 genes. Among them, six strains were identified as Aspergillus oryzae and the other strains were identified as Mycocladus corymbiferus, Rhizopus oryzae, Lichtheimia corymbifera.
불안정성 흉요추체 방출형 골절 환자에서 기구를 이용한 고정술의 결과
안병조,이정청,김재은,김형일,김철진,최하영 대한신경외과학회 1996 Journal of Korean neurosurgical society Vol.25 No.9
Fifty six patients with unstable thoracolumbar bursting fractures were treated using variable internal fixation devices such as the Kaneda Anterior Fixation System(Kaneda device), the Z-Plate-ATL^(TM) Anterior Fixation System(Z-Plate ATL^(TM)device), the Harrington device. Cotrel-Dudousset(CD) or Compact Cotrel Dubousset(CCD) device of Steffee Transpedicular System with or without decompression. Suchy internal fixation devices were grouped into anterior and posterior internal fixation devices and compared with each other in the aspect of the degree of neurological improvement, the changes of the vertebral height and the kyphotic angle, the duration of admission, and postoperative complications. In conclusion, the anterior internal fixation device appears to be of more benefit in the management of patients with unstable thoracolumbar bursting fracture
부분 치수절단술을 이용한 복잡 치관파절의 치료 : 증례보고
안병덕,김영재,장기택,이상훈,김종철,한세현,김정욱 大韓小兒齒科學會 2008 大韓小兒齒科學會誌 Vol.35 No.2
혼합 치열기 및 초기 영구치열기의 소아,청소년에서 외상에 의한 치관 파절은 빈번하게 발생한다. 치관파절은 치수의 노출 유무에 따라 단순 치관파절,복잡 치관파절로 분류된다. 치수가 노출된 복잡 치관파절의 경우 치수에 대한 고려 및 처치가 필수적인데,초기 영구치열기에는 전치부 치근의 발육이 완전히 이루어지지 않았기 때문에 완성된 치근을 가지는 치아보다 치료가 복잡하다. 치료의 목적은 적절한 치수 치료를 통해 치근의 완성을 도모하는 것으로 이를 위해 직접 치수복조술,부분 치수절단술,치경부 치수절단술의 방법을 이용한다. 이 중 부분 치수절단술은 성공률도 높으며 치경부 치수를 보존하기 때문에 여러 장점을 지니는 치료방법이다. 복잡 치관파절을 주소로 내원한 환자에서 부분 치수절단술을 시행하여 양호한 결과를 나타내어 이를 보고하는 바이다. Traumatic crown fracture in mixed dentition or early permanent dentition is relatively common. Crown fracture is classified into simple or complicated crown fracture by the presence of pulp exposure. The condition of pulp must be considered in treatment of crown fractures with pulp exposure. Treatment of immature crown-fractured incisor with pulp exposure is more complex because of its incomplete root formation. Pulp capping, partial pulpotomy, cervical pulpotomy can be used for continuous root development in immature crown-fractured incisor with pulp exposure. The success rate of partial pulpotomy is very high and there are several advantages of partial pulpotomy because the cell-rich coronal pulp tissue is preserved. This paper reports 2 cases of crown-fractured permanent incisors with pulp exposure that had been treated by partial pulpotomy successfully.
이병문,권재현,안규홍,이석헌,권대영 대한상하수도학회 2003 상하수도학회지 Vol.17 No.1
The acidic treatment of waterworks sludge released organic materials as well as inorganics such as Al, Fe and Mn. Through solubilization as mentioned above, the content of suspended solids reduced by 18% at final pH 3.5. It also increased thickening efficiency and dewaterability of sludge. However overdosing of H_2SO_4 made dewaterability deteriorated. It showed that the optimal condition of acidic treatment be as follows; 5.5㎖ dose of H_2SO_4(97%)/1 sludge, final pH 3.5 and 15minutes of reaction time. Under these conditions, reduction efficiencies of sludge through thickening and dewatering were 57% and 92.2% respectively and then 7.8% of raw sludge released as cake compared to 10.5% without acidic pre-treatment. Therefore, mass of dewatered cake decreased by 26% through acidic treatment. Water content of dewatered cake was reduced from 71% to 62% due to this treatment. The changes of sludge properties including particle size, zeta-potential and bound water by acidic treatment appear to be important keys in assesment of the improvement of sludge dewaterability.
송재복,안병철 全北行政學會 2000 全北行政學報 Vol.14 No.1
이 논문은 한국에서 과도한 국방예산이 복지예산의 결정에 어떠한 영향관계를 형성하고 있느냐에 대한 문제를 1962년부터 1998년까지의 예산자료를 근거로 이 두 예산간의 관계를 분석한 것이다. 분석결과 두 예산 사이에는 통계적으로 유의미한 관계, 즉 국방예산이 복지예산에 음(-)의 방향으로 영향을 미치고 있다는 사실이 발견되었다. 이러한 분석결과는 한국에서 두 예산간에는 독립적 관계보다는 상충관계가 존재하고 있다는 사실을 알려주고 있다. 그러나 이러한 결과가 나타났다고 해서 한국에서 두 예산간에는 상층성이 존재한다고 절대로 가치로 해석하는 것은 무리이다. 왜냐하면 두 예산의 사이에는 다양한 변수들이 관련된 매우 복잡한 문제이며 또 통계적 논리로 얘기할 수 있는 부문이 한정되어 있기 때문이다. 하지만 이 논문은 장기적인 관저에서 본다면, 정부의 과다한 국방예산 때문에 복지예산에 사용될 예산들이 그 동안 사용되지 못했다는 그 가능성은 충분히 존재하고 있다는 것을 주장한다.
소재 관련업체 및 기관과 신소재연구소의 상호 정보교환 시스템 구축
박재윤,안영철,전병세 경남대학교 신소재연구소 2002 신소재연구 Vol.14 No.-
현재 국내 부품소재 산업은 제조업 총 생산액의 약 30%를 차지하는 주요산업이며, 향후 그 규모가 확대될 전망이다. 그러나, 산학간의 관계에 있어서는 상대방에 대한 정보가 제한되어 있기 때문에 중소기업의 애로기술을 해결하기 위한 산학협동이 어려운 실정이다. 따라서 경남대학교 신소재연구소에서는 산학간의 정보교환을 원활하게 하고 중소기업의 애로기술을 해결하고자 부품소재관련 전문 홈페이지를 구축하였다. 본 연구에서는 중소기업 및 경남대학교의 구성원이 신소재연구소의 홈페이지를 쉽게 사용할 수 있도록 홈페이지의 내용을 설명하고자 한다. Currently, parts and materials industry is the major part of the domestic manufacturing industry occupying 30% of the market and the share is expected to increasingly grow. However, as far as the relationship between the industry and the university is concerned, it is very difficult to develop an industry-university cooperation to solve a technological difficulties of the medium and small sized enterprises because of the limited amount of informations between them. Therefore, a homepage for parts and materials has been constructed in the Institute for Advanced Materials in Kyungnam University to facilitate free exchange of informations between industry and university and to solve technological difficulties of the industry. In this study, the contents of the homepage are introduced in detail for the users in the medium and small sized enterprises and Kyungnam University.