http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최명신 ( Myung Shin Choi ),윤진효 ( Jin Hyo Yun ),박경수 ( Kyung Su Park ) 기술경영경제학회 2006 Journal of Technology Innovation Vol.14 No.1
This paper attempts to identify variables which affect Korean technology innovation-driven SMEs` performance in comparison with IT and BT industries. Technology development strategy, marketing capability, intellectual capital managerial ability are included to generate variables for the empirical research. The results of this study show that technology development strategy, marketing capability, intellectual capital managerial ability influence on the sales growth of technology-based SME in IT and BT industries. It also discusses some implications of Korean technology innovation-driven SMEs` strategy and management.
권경진 ( Kyoung Jin Kwon ),김도정 ( Do Jung Kim ),김상섭 ( Sang Seop Kim ),최유빈 ( Yu Bin Choi ),김미정 ( Mi Jeong Kim ),최명신 ( Myeong Sin Choi ),최보경 ( Bo Kyung Choi ),김동섭 ( Dong Sup Kim ) 대한화장품학회 2010 대한화장품학회지 Vol.36 No.3
탈모 방지의 목적으로 사용되는 양모제는 현재 우리나라에서 의약외품이며 약사법으로 관리되고 있다. 최근 탈모에 대한 사회적 관심이 증가하면서 양모제에 대한 수요도 증가하고 있는 실정이지만 양모제는 생약추출물, 비타민류, 보존제 등 다양한 종류의 성분이 혼합되어 있어 분석이 쉽지 않다. 본 연구에서는 양모제의 주성분으로 많이 쓰이는 니코틴산아미드, 덱스판테놀, 살리실산, 초산토코페롤, 니코틴산벤질에 대한 동시분석법을 확립하고자 하였다. 시판 중인 양모제를 구입하여 C18 컬럼, 아세토니트릴과 인산염완충액을 용매로 사용하여 HPLC로 분석하였다. 검출은 자외부흡광광도계를 이용하여 220, 270, 300 nm 파장에서 분석하였으며, 12.5 ∼ 800 μg/mL 농도범위에서 검량선을 작성하였다. 회수율은 액상기제의 경우 97.3 ∼ 103.5 % (상대표준편차 0.9 ∼ 2.8 %), 샴푸기제의 경우 101.9 ∼ 115.9 % (상대표준편차 0.7 ∼ 7.7 %)로 양호한 결과를 나타냈다. 시판중인 검체의 함량 시험결과 기준에 적합하였으며, 본 분석법을 이용하여 품질관리 및 추후 양모제 개발에 유용하게 활용함으로써 우수한 품질의 양모제 유통에 크게 기여할 것으로 기대된다. The hair nourisher products are used for prevention of hair loss and classified as quasi-drug in Korea. As concerns about hair loss has been increased, the demand for hair nourisher products has been growing. It is difficult to analyze their main ingredients because they contain various ingredients including natural plant extracts, vitamins, preservatives and exfoliators. The purpose of this study was to develop and validate simultaneous analytical methods of active ingredients in hair nourisher products such as nicotinamide, tocopherol, salicylic acid, dexpanthenol and benzyl nicotinate by HPLC. The active ingredients were separated on a C18 column by using acetonitrile/ phosphate buffer as a mobile phase, and detected at UV 220, 270 and 300 nm. The calibration curve showed linearity in the range of 12.5 ∼ 800 μg/mL and the recoveries were 97.3 ∼ 103.5 % (RSD 0.9 ∼ 2.8 %) in liquid matrix and 101.9 ∼ 115.9 % (RSD 0.7 ∼ 7.7 %) in shampoo matrix. Validated method was applied to hair nourisher products obtained from distribution market. Fortunately, all samples met their criteria. This study might be expected to provide the method for determining active ingredients in hair nourisher products and lead to promote a rapid market entry.
신성우,이광수,최명신,김현식,Shin, Sung-Woo,Lee, Kwang-Soo,Choi, Myung-Shin,Kim, Hyun-Sik 한국콘크리트학회 1999 콘크리트학회지 Vol.11 No.2
최근들어 그 필요성이 증대되고 있는 경량 콘크리트의 경우, 부착강도의 저하를 고려하여 ACI 규준에서는 부착길이 보정계수를 도입하여 안전율을 높이고 있으나, 경량 콘크리트가 고강도화됨에 따라 어느 정도 부착강도의 증징이 있을 것으로 판단된다. 따라서 ACI 규준에서 정하고 있는 경량 콘크리트에 대한 부착길이 보정계수 ${\lambda}$=1.3을 고강도 경량 콘크리트에 적용할 경우 그 적정성 여부에 대한 검토가 필요하다. 본 연구에서는 고강도 경량 콘크리트의 부착특성을 알아보기 위하여 콘크리트 압축강도, 피복두께, 철근직경, 부착길이 등을 변수로 하여 Pull-out 실험을 실시하였다. 실험결과 부착응력은 콘크리트 압축강도 제곱근과 피복두께가 증가함에 따라 증가하였고, 철근직경과 부칙길이가 증가함에 따라 감소하였으며, 파괴양상은 피복두께에 따라 쪼개짐 파괴와 뽑힘 파괴를 나타내었다. 고강도 경량 콘크리트의 부착응력을 보통중량 콘크리트보다는 큰 값을 나타낸다. 따라서 ACI 규준에서 정하고 있는 경량 콘크리트 부착길이 보정계수를 고강도 경량 콘크리트에 적용할 경우 경량 콘크리트의 고강도화에 따른 부착응력 상승효과를 고려하여 하향조정하여야 할 것으로 판단된다. 또한 피복두께 2.5$d_b$ 이상일 경우 적용하는 피복두께 보정계수 0.8은 고강도 경량 콘크리트에도 그대로 적용할 수 있음을 알 수 있다. Recently, it is increased the use of High-Strength Light-Weight Concrete(HLC) in the high-rise buildings and mega-structures. But there are a few research on the bond behavior of HLC, so it need to study about that. The present study was performed to investigate the bond characteristics of HLC. Major test variables include concrete compressive strength(f'c), concrete cover(c), bond length (${\ell}_{db}$), and bar diameter($d_b$). Test results indicate that the bond stress of HLC is increased with the increment of $\sqrt{f'_c}$ and concrete cover, bond stress is decreased with increment of bond length and bar diameter. And the final failure mode such as splitting or pullout failure is significantly affected by the concrete cover to bar diameter ratios(C/$d_b$). Test results were compared with ACI code and other proposed equations. The bond stress of HLC is higher than that of normal-strength normal-weight concrete, but lower than that of high-strength normal-weight concrte. Considering the present test results, modification factor(${\lambda}$= 1.3) of bond length in ACI 318-95 code for light-weight concrete is may have to be reviewed to apply to HLC.
신성우,이광수,안종문,최명신,Shin, Sung-Woo,Lee, Kwang-Soo,Ahn, Jong-Mun,Choi, Myung-Shin 한국콘크리트학회 1999 콘크리트학회지 Vol.11 No.1
본 연구에서는 전단보강비율에 따른 고강도경량 철근콘크리트보의 전단거동을 규명하기 위하여 15개의 실험체를 제작하여 실험하였다. 실험변수는 전단스팬비(a/d=2.5, 3.5, 4.5)와 전단보강근비($0{\sim}1.0_{ACI}{\rho}_v$)이고 큰크리트의 압축강도 (439kg/$cm^2$)와 주철근비(0.02023)는 일정하게 하였다. 실험결과, ACI 규준식은 고강도경량 철근콘크리트보에서 큰크리트의 전단내력은 과소평가하는 반면 전단보강근의 전단내격은 과대평가하는 것으로 나타났다. 큰크리트의 전단강도($V_{cr}$)식에서 경량콘크리트에 대한 추가적인 전단강도저감계수 ${\lambda}$=0.85는 경량콘크리트의 고강도화에 따라서 다소 상향조정하여 사용할 필요가 있는 것으로 보인다. 또한, 전단보강근의 전단강도는 보통중량콘크리트보와 같이 전단보강비율에 직선적으로 비례하는 것이 아니라 그 제곱근에 비례하는 경향을 보였으며, 따라서 고강도경량 철근콘크리트보에서 전단보강근의 유효성(전단보강의 효과)은 보통중량콘크리트에 비해 떨어진다고 볼 수 있다. In this study, fifteen reinforced high-strength lightweight concrete(HLC)beams were tested to investigate shear behavior of specimens according to shear reinforcement ratio. Test variables are shear span to effective depth ratio(a/d=2.5, 3.5, 4.5) and shear reinforcement ratio(0~1.0${\rho}_{v,ACI}$). Concrete compressive strength and tensile steel reinforcement ratio are constantly 439kg/$cm^2$ and 0.0203, respectively. Test results for the HLC beams showed that ACI code equation underestimates the shear strength of concrete($V_c$), and overestimates the shear strength of shear reinforcements($V_s$). It is revealed that the effectivenesses of shear reinforcements of reinforced HLC beams are lower than those of normal weight concrete beams. Then, the shear strengths of shear reinforcements are increased in proportion not to first degree of shear reinforcement ration but to square root of them.