http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초고강도 콘크리트 기둥의 폭렬저감방안에 관한 실험적 연구
신성우,유석형,김인기 한국구조물진단유지관리공학회 2006 한국구조물진단유지관리공학회 논문집 Vol.10 No.5
고온에 노출된 고강도 콘크리트의 폭렬저감대책으로서 폴리프로필렌 섬유를 콘크리트에 혼입함으로써 취성적 파괴를 방지할 수 있는 것으로 보고 되었다. 그러나 초고강도 콘크리트 배합시 다량으로 혼입되는 PP섬유는 시공성을 저하시키는 원인이 된다. 또한 초고강도 콘크리트의 강도발현을 위하여 필수적으로 사용되는 실리카흄은 콘크리트의 수밀성을 높여 폭렬현상이 더욱 심하게 발생할 것으로 판단된다. 본 연구에서는 고강도 콘크리트에서 실리카흄이 폭렬에 미치는 영향과 초고강도 콘크리트의 시공성을 확보하기 위하여 PP섬유를 대신하여 PP분말 및 PVA의 내화성능을 실험을 통하여 관찰함으로써 초고강도 콘크리트의 내화성능확보를 위한 기초 자료를 제시하였다. It was presented that the spalling of high strength concrete exposed to high temperature could be reduced by using polypropylene fiber. However, as the concrete strength increase, the demanded quantity of PP fiber increase and this results in the loss of workability of ultra high strength concrete. The silica fume which is essentially mixed in ultra high strength concrete decrease the permeability of concrete, and this will increase the degree of spalling. In this study the effect of silica fume on the spalling of ultra high strength concrete and the fire resisting efficiency of PP fiber and poly vinyl alchol, instead of PP fiber, for the security of workability were experimentally examined.
고로슬래그 미분말의 치환방법이 시멘트 모르터의 초기 압축강도에 미치는 영향
신성우,이한승,최명신,정진,김정식,강훈 대한건축학회 1999 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.19 No.2
The purpose of this study is to investigate the effect of substitution method of finely furnace-blast Slag (SB) on cement-mortal compressive strength at early age. In the experiment, the compressive strength test of cement-mortar (KS and JIS method) was conducted in variable of the type of cement(OPC. HPC) and mixing method (internal mix method, external mix method, internal-external mixt method). As a result, the using of HPC. external mix method and internal-external mix method are very effective to increase compressive strength of cement-mortar at early age compared with using of OPC and internal mix method which is conventional mix method.
신성우,최종수,이광수 한국콘크리트학회 1995 콘크리트학회지 Vol.7 No.1
철근과 콘크리트의 부착성능에 영향을 미치는 인자들을 평가하기 위하여 부착실험을 수행하였다. 주요변수로는 콘크리트의 압축강도($f_c$'=340, 460, 650, $904kg/cm^2$), 콘크리트의 피복두께(25, 38, 51, 105, 110mm), 철근의 직경(D13, D22)으로 하였으며 구속철근의 효과와 철근간격은 고려하지 않았다. 철근이 일축인장력을 받을 때 철근의 전 부착길이에 걸쳐 응력이 일정하다는 가정하에 32개의 실험체를 제작, 실험하였다. 각 실험체별로 파괴모드를 고찰하였고, 부착응력.변위관계를 통하여 변수의 영향을 평가하였으며, 실험결과에 다른 최대부착응력을 ACI 규준의 상한선($700kg/cm^2$)을 초과하여도 부착응력 및 최대 부착응력이 증가하는 것으로 나타나 콘크리트 압축강도 상한선을 초과하는 경우 정착길이 산정시 압축강도 증가에 따른 영향을 고려하여야 하는 것으로 나타났다. Bond test was carried out to assess the effect of several variables on bond characteristics between reinforcing bar and concrete. Key variables are concrete compressive strength($f_c$'=340, 460, 6513, 904kg/$cm^2$), concrete cover (25, 38, 51, 105, IlOmm), and bar diameter(Dl3 and D22). Confining effect and bar spacing are not taken into account. Thirty-two specimens subjected to uniaxial tension were tested under hypothesis uniform bond stress distribution along the reinforcing bar embeded in concrete. Failure mode was examined and local bond stress versus slip relationship diagrams were represented to show effect of the above variables, also test results(u1timate bond stress) were compared with bond and development provisions of the ACI Building Code(AC1 318-89) and proposed equations from previous research. According to analysis, borld stress and ultimate bond stress increased although compressive strength increased beyond the ACI Building Code upper limit. Therefore in calculating development length. compressive strength effect(exceeding 700kg /$cm^2$) should be accounted.
신성우 대한건축학회 1991 建築 Vol.35 No.1
지구상에서 단일건설재료로서 가장 널리 쓰이고 있는 콘크리트는 그의 경제성과 실용성에도 불구하고 무게에 비한 낮은 강도 (low strength to unit weight),시공의 곤란성과 이의 부실에 따른 낮은 내구성(poor durability)등 기본적구조재료로서 문제점을 갖고 있어, 이들을 개선하기 위한 많은 노력이 있어 왔으며, 그중 고강도화는 역시 꾸준히 추진되어온 분야의 하나이다. 콘크리트의 고강도화는 부재단면의 축소 이외에도 높은 수밀성때문에 내구성이 향상되는 등 여러가지 잇점이 있으나 요구되는 고강도화 정도는 그 시대적, 지리적 그리고 사회적 배경에 따라 차이가 있어 왔다.