http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
철근콘크리트 원형기둥의 나선철근 최소철근비에 대한 평가
김영식,김형국,박천범,김상우,김길희,Kim, Young-Seek,Kim, Hyeong-Gook,Park, Cheon-Beom,Kim, Sang-Woo,Kim, Kil-Hee 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 논문집 Vol.21 No.6
원형 기둥의 나선철근은 축방향 철근의 위치 고정 및 좌굴방지와 코어콘크리트의 충분한 횡구속으로 기둥의 연성거동에 효과적인 역할을 한다. 각국은 기둥에 요구되는 연성을 확보하기 위하여 나선철근의 최소철근비를 제시하고 있다. ACI 318-14와 국내 콘크리트 구조설계 기준에서 제시하는 나선철근 최소철근비는 Richart et al.(1928)의 이론에 기초하여 개발되었으며 현재까지 사용되고 있다. 그러나 Richart et al.(1928)의 이론은 현대의 고강도 콘크리트, 고강도철근 그리고 나선철근의 배근조건 등의 영향을 고려하지 못한다. 이 연구에서는 나선철근으로 구속된 철근콘크리트 원형 기둥의 내력회복 및 연성증진에 요구되는 나선철근에 대한 수정 최소철근비 산정식을 제시한다. 수정 최소철근비 산정식은 콘크리트 압축강도, 나선철근 항복강도, 기둥의 단면적, 나선철근 배근간격, 나선철근 직경의 영향을 고려하고 있다. 이 논문에서는 재료강도 및 나선철근 최적비를 변수로 한 실험체의 일축 압축실험을 통하여 ACI 318-14에 제시하는 나선철근 최소철근비 산정식의 타당성을 검토하고, 그 결과를 토대로 나선철근 최소철근비 산정식의 수정방안을 고찰하였다. Spiral reinforcement in a circular column plays an effective role in the ductile behavior of a column through position fixing and buckling restraining of the longitudinal reinforcement, and confining core-concrete. Each country has suggested the minimum volumetric ratio of spiral reinforcement in order to secure the ductility of concrete columns. The minimum volumetric ratio of spiral reinforcement suggested by ACI 318-14 and the national concrete structure design standard was developed based on the theory of Richard et al. (1928); furthermore it has been used until now. However, their theory cannot consider the effects of high strength concrete and high strength reinforcement, and arrangement condition of the spiral reinforcement. In this study, a modified minimum volumetric ratio equation is suggested, which is required to improve the ductility of reinforced concrete circular columns and to recover their stress. The modified minimum volumetric ratio equation suggested here considers the effect of the compressive strength of concrete, the yield strength of spiral reinforcement, the cross sectional area of columns, the pitch of spiral reinforcements and the diameter of spiral reinforcement. In this paper, the validity of the minimum volumetric ratios from ACI 318-14 and this study was investigated and compared based on the results of uniaxial compression experiment for specimens in which the material strength and the spiral reinforcements ratio were used as variables. In the end of the study, the modification method for the suggested equation was examined.
고탄소강의 연속 건식 신선 공정에서 선재의 온도 예측 기법 개발
김영식,김동환,김병민,김민안,박용민,Kim, Yeong-Sik,Kim, Dong-Hwan,Kim, Byeong-Min,Kim, Min-An,Park, Yong-Min 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.2
Wire drawing process of the high carbon steel with a high speed is usually conducted at room temperature using a number of passes or reductions through consequently located dies. In multi-stage drawing process, temperature rise in each pass affects the mechanical properties of final product such as bend, twist and tensile strength. Also, this temperature rise during the deformation is the reason that the wire in drawing process is broken by the embrittlement due to rapid strain aging effect. This paper presents the estimation of the wire temperature for the multi-stage wire drawing process. Using the proposed calculation method of wire temperature, temperature rise at deformation zone as well as temperature drop in block considering the heat transfer between the block and wire were calculated. As these calculated wire temperatures were applied to the real industrial fields, it was known that the calculated results were in a good agreement with the measured wire temperature.
티타니아 세라믹 熔射皮膜의 機械的 特性에 미치는 熔射條件의 影響에 관한 硏究
김영식,김영식,Kim, Yeong-Sik,Kim, Yeong-Sik 한국마린엔지니어링학회 1991 한국마린엔지니어링학회지 Vol.15 No.3
The purpose of this investigation is to examine the effects of spraying conditions on the mechanical properties of flame-sprayed titania ceramic coating layer. Titania ceramic was sprayed onto the mild steel substrate under the various spraying conditions. Spraying distances were 100, 150, 200, 250mm respectively and pinch air pressures were 0.2 0.3, 0.4 MPa at each spraying distance. The mechanical properties such as microhardness, adhesive strength and erosion wear resistance were tested for the specimens sprayed under the various spraying conditions above mentioned. The optimum operational conditions obtained through the experimental results were 150mm of spraying distance and 0.3 MPa of pinch air pressure.
레토르트 및 감마선 조사에 의한 화닭 덮밥 소스의 미생물 제어 효과 비교
김영식,김현주,윤요한,신명곤,김천제,신미혜,이주운,Kim, Young-Sik,Kim, Hyun-Joo,Yoon, Yo-Han,Shin, Myung-Gon,Kim, Cheon-Jei,Shin, Mee-Hye,Lee, Ju-Woon 한국축산식품학회 2010 한국축산식품학회지 Vol.30 No.1
This study evaluated the antimicrobial effects of retort process and gamma irradiation on reduction of total bacterial populations in spicy chicken sauce, which is served on top of the steamed rice. Commercial spicy chicken sauce was treated with retort and gamma ray at 0, 1, 3, 5, and 10 kGy. Total aerobic bacterial populations were then enumerated on plate count agar and isolated bacteria from the test samples were identified using PCR analysis. Moreover, gamma ray sensitivity of identified bacteria was evaluated by $D_{10}$ values, and genotoxicity of gamma-irradiated samples was examined. Gamma irradiation at 3 kGy reduced total aerobic bacterial cell counts in spicy chicken sauce below detection limit, but total aerobic bacterial cell counts in test samples treated with retort were 2.1 log CFU/g. Identified bacteria from the samples were Bacillus subtilis, B. amyloiquefaciense, and B. pumils, and the $D_{10}$ values for B. subtilis and B. cereus were 0.39 ($R^2\;=\;0.921$) and 0.28 log CFU/g ($R^2\;=\;0.904$), respectively. The SOS chromotest showed that the gamma-irradiated spicy chicken sauce did not cause mutagenicity. These results indicate that gamma irradiation of spicy chicken sauce could be useful in ensuring microbial safety.
가정의학과 외래 우울증환자에서 moclobemide의 안전성 및 유효성 평가를 위한 시판후조사
김영식,이근미,김병성,신호철,성은주,이상엽,문유선,송상욱,김철환,선우성,Kim, Young-Sik,Lee, Keun-Mi,Kim, Byung-Sung,Shin, Ho-Cheol,Sung, Eun-Ju,Lee, Sang-Yeoup,Moon, Yoo-Sun,Song, Sang-Wook,Kim, Cheol-Hwan,Sunwoo, Sung 대한임상약리학회 2002 臨床藥理學會誌 Vol.10 No.1
Background : Depression is quite a common disease in primary care however, studies for the safety and effectiveness of antidepressants in primary care setting are rare in Korea. Objectives : This multi-centered post-marketing study was performed to evaluate the safety and effectiveness of Moclobemide and to find out the factors related to the adherence among patients with depression in family practice. Methods : A total of 386 patients were enrolled from July 1999 to January 2000 by twenty family doctors from fifteen family practice centers. They were prescribed Moclobemide and were reevaluated at the 4th, 8th, and l2th week. Evaluation of compliance, safety and effectiveness were performed with pre-made, structured self-reported questionnaires. Evaluation of effectiveness was also performed utilizing self-rating depression scale (SDS). Results : Among 386 patients, safety was evaluated in 310 patients and effectiveness was evaluated in 239 patients. During the first 12 weeks, the number of subjects continuing with Mocclobemide was 136(37.1%). 141 subjects (38.4%) discontinued taking the drug and 90 subjects (24.5%) dropped out at the 12th week. Considering drop-out patients as ineffective cases, overall effectiveness was estimated to be 84.5%. Symptoms improved with time in patients whose follow-up were completed (P<0.01). The SDS score decreased by an average of ${6.8{\pm}9.1(12.2{\pm}19.1%)}$ after 12 weeks(p<0.01). During the study, 33(10.6%) subjects reported adverse events. The most commonly reported adverse events, in descending order, were dizziness(2.3%), headache(1.6%), insomnia(1.3%), facial edema(1.3%), constipation(1.0%), nausea(1.0%) and tremor(1.0%). The main reasons for discontinuing antidepressants were attributed to improvement of symptoms and manifestation of adverse events. Conclusion : The percentage of adherence at 12th week of Moclobemire among patients suffering from depression in the family practice outpatient clinic was shown to be 49%. The antidepressant effect and safety of Moclobemide was relatively superior.
김영식,길상철,Kim, Youngsik,Kil, Sangcheol 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.2
The laser/arc hybrid welding process is a new process combining the laser beam and the arc as welding heat source. The laser beam and arc influence and assist one another. By application of hybrid welding, synergistic effects are achievable, and disadvantage of the respective processes can be compensated. The laser-arc hybrid welding process has good potential to extend the field of applications of laser technology, and provide significant improvements in weld quality and process efficiency in manufacturing applications. This review analyses the recent advances in the fundamental understanding of hybrid welding processes using the works of the data base of Web of Science (SCI-Expanded) since the 2000 year. The research activity on the hybrid welding has been become more actively since 2006, especially in China, presenting the most research papers in the world. Since the hybrid welding process was adopted in manufacturing of the automobile in Europe in the early of 2000's, its adopting is widely expanded in the field of manufacturing of automobile, ship building, steel construction and the other various industry. The hybrid welding process is expected to advance toward higher productivity, higher precision, higher reliability through the mixing of high power and flexible fiber laser or disk laser and digitalized pulsed arc source.
김영식,주영승,Kim, Young-Sik,Ju, Young-Sung 대한본초학회 2016 大韓本草學會誌 Vol.31 No.4
Objectives : This study is to propose discriminative keys with stereoscope for minute seed herbs easily mixed up, but hard to discriminate by naked eyes: Alli Tuberosi Semen(ATS)?Alli Fistulosi Semen(AFS), Malvae Semen(MS)? Abutili Semen(AS), Plantaginis Semen(PS)?Schizonepetae Semen(SS).Objectives : We reviewed the description of original plants and medicinal herbs from literature. The specimen of original plant were collected, determinated and compared to samples in the market. Primary classification was performed with naked eyes. and we found out other discrimination keys for non-distinctive herbs with stereoscope. Discrimination keys were set as the morphological criteria of authentic herbs, percentage of adulteration, and standards for discriminating genuine herbs from adulteration.Results : 1) ATS is bigger, has reticulate pattern on protuberant side and unique garlic chives taste. AFS which is usually mixed up, is smaller, has 1~2 ridges and unique welsh onion taste. 2) MS is smaller, has no villus, but its length of bumps are similar. AS easily mixed up, is bigger and has white villus. Its upper side bump is longer and more sharp. 3) PS has dent at middle of the back side. It becomes very sticky when it is put or boiled in water. SS which can be mixed up has no dent and low viscosity compared to PS.Conclusions : With this result, we propose discriminative keys which can identify the original plants and processed herbal state of six herbs. Because minute medicinal herbs are hardly distinguishable by sensory test, It is essential to differentiate by using stereoscope.