http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초음파 도플러 센서를 이용한 삼킴장애의 정량적 평가 시스템 개발
이백희,정기효,양길태,서미경,나덕렬,유희천 한국경영과학회 2012 한국경영과학회 학술대회논문집 Vol.2012 No.5
삼킴장애(dysphagia)는 음식을 먹는 과정에서 발생하는 어려움을 포괄적으로 일컫는 용어이다. 인두강 단계의 삼킴장애는 현재 비디오 투시 조영 검사 장치(VFSS)와 비디오 내시경 검사 장치(FEES)를 이용하여 측정되고 있으나, 비교적 단시간 내에 삼킴 검사가 이루어져야 하기 때문에, 각 환자들의 일상생활에서의 삼킴장애 특성을 파악하는데 어려움이 있다. 본 연구는 초음파 도플러 센서를 사용하여 인두강 내부 구조들의 움직임을 파악할 수 있는 휴대용 삼킴측정장비를 개발하고, 삼킴의 특성을 평가할 수 있는 시스템을 개발하였다. 본 연구는 삼킴 특성의 정량화를 위하여 측정된 삼킴 신호로부터 5가지 삼킴 정량화 척도(삼킴 강도, 삼킴 지속시간, 삼킴 peak 수, 삼킴peak 간격, 그리고 삼킴 충격량)를 분석할 수 있는 시스템을 개발하였다. 또한, 삼킴 정량화 척도들의 유용성 검증을 위하여 정상인과 환자 각각 10명씩의 삼킴을 측정하여, 삼킴 특성을 비교 분석하였다. 본 연구에서 개발된 삼킴측정장비 및 시스템은 추후 삼킴장애 환자를 판별하고, 지속적으로 삼킴 특성을 파악하는데 유용하게 활용될 수 있을 것으로 기대된다.
다중치수제품의 치수체계 설계를 위한 산포대표인체모델 생성 및 분석 시스템 개발
이백희,유희천 대한산업공학회 2011 대한산업공학회 추계학술대회논문집 Vol.2011 No.11
산포대표인체모델(distributed representative human model, DRHM)은 의류나 복과 같은 다중치수제품(multiple-size product)의 대량맞춤생산(mass customization)을 위한 치수체계 개발에 활용되고 있다. 다양한 DRHM 생성방법들이 통계적 기법적용을 통하여 개발되고 있으나, DRHM 생성방법들이 용이하게 제품 설계에 사용될 수 있는 시스템의 개발은 미흡한 실정이다. 본 연구는 인체측정자료에 대해 다양한 기법들을 적용하여 DRHM을 생성하고 성능을 통계적으로 분석하는 시스템을 개발하였다. 본 시스템은 문헌조사를 통해 파악된 5단계 DRHM 생성절차(S1. 설계대상인구 선정, S2. 설계대상인체변수 선정, S3. 중요변수 선정, S4. DRHM 생성방법 결정, 그리고 S5. DRHM 인체크기 결정)에 따라 제품개발자가 용이하게 사용할 수 있도록 설계되었으며, 생성된 DRHM의 인체크기 와 단변량 및 다변량 수용 비율(univariate & multivariate accommodation percentage)이 분석되도록 개발되었다. 마지막으로, 본 시스템은 남성 비행복 치수체계 개발 및 성능 분석에 적용되어 효용성이 평가되었다. 본 연구의 DRHM 생성 및 분석 시스템은 설계대상인구의 인체크기를 통계적으로 적합하게 대표하는 치수체계 개발에 유용하게 활용될 것으로 기대된다.
Digital Human Simulation 을 활용한 방사성 폐기물 처리장 주제어실의 인간공학적 평가
이백희,장윤,정기효,정일호,유희천 대한인간공학회 2009 대한인간공학회 학술대회논문집 Vol.2009 No.11
방사성 폐기물 처리장(이하, 방폐장) 주제어실은 안전한 운용과 장시간 감시 작업으로 인한 운전원 피로를 예방할 수 있도록 인간공학적인 설계와 평가가 필요하다. 본 연구는 digital human simulation (DHS) 기법을 활용하여 국내 적용 예정인 방폐장 주제어실 개념 설계에 대한인간공학적 평가와 개선 방향을 분석하였다. 본 연구의 DHS 평가에는 한국인 남성 20 ~ 50대를 90% 수용하는 가상인체모델 3명(5<SUP>th</SUP>, 50<SUP>th</SUP>, and 95<SUP>th</SUP> percentiles)과 향후 20년간 신장에 대한 추세변동(secular trend; 약 4 cm로 예측)을 반영하는 가상인체모델 1명(99<SUP>th</SUP> percentile)이 활용되었다. 방폐장 주제어실의 설계 적합성은 네 가지 측면(자세 안락도, 도달성, 시계성, 그리고 여유공간)의 인간공학적 평가와 원자력 시설 관련 지침인 NUREG-0700 규격 충족 여부를 종합적으로 고려하여 분석되었다. DHS 평가를 통해 설계 개선이 요구되는 것으로 파악된 설계항목에 대해서는 설계 개선 방안을 개발하고 개선 효과를 분석하였다. 본 연구를 통해 평가 및 개선된 방폐장 주제어실 개념설계는 방폐장 주제어실 개발 시 유용하게 활용될 수 있을 것이다.
이백희,안봉수,김대건,김영도 한국분말야금학회 2002 한국분말재료학회지 (KPMI) Vol.9 No.3
Conventional Fe-Co alloys are important soft magnetic materials that have been widely used in industry. Compared to its polycrystalline counterpart, the nanostructured materials have showed superior magnetic properties, such as higher permeability and lower coercivity due to the single domain configuration. However, magnetic properties of nanostructured materials are affected in complicated manner by their microstructure such as grain size, internal strain and crystal structure. Thus, studies on synthesis of nanostructured materials with controlled microstructure are necessary for a significant improvement in magnetic properties. In the present work, starting with two powder mixtures of Fe and Co produced by mechanical alloying (MA) and hydrogen reduction process (HRP), differences in the preparation process and in the resulting microstructural characteristics will be described for the nano-sized Fe-Co alloy particles. Moreover, we discuss the effect of the microstructure such as crystal structure and grain size of Fe-Co alloys on the magnetic properties.
이백희,이규환,김영도 한국생체재료학회 2002 생체재료학회지 Vol.6 No.3
Hot forming condition of Co-Ni-Cr-Mo alloy (MP35N) was studied with increase of mechanical property by using THERMECMASTOR. The Co-Ni-Cr-Mo alloy was forged for near shape in high temperature, and then made up a finished product using precision machining when the alloy was made for the joint prostheses. In this study, the deformation behavior of the Co-Ni-Cr-Mo alloy was investigated with temperature and deformation rate for the most suitable hot forming condition by using THERMECMASTOR.
생체용 Co-Cr-Mo(ASTM F75) 합금에서의 미세조직과 기계적 특성에 미치는 열처리의 영향
李柏熙,金榮度,李圭煥 대한금속재료학회 2002 대한금속·재료학회지 Vol.40 No.4
Co-Cr-Mo(ASTM F75) alloy is normally used for hip and knee prostheses. In this study, the effects of heat treatments on the mechanical and corrosion properties of Co-Cr-Mo alloy were studied. Solid solution treatment was performed at 1230℃ for 2 h to increase the ductility of the as-cast alloy, and the alloy was aged 700℃ for 1 h to increase the strength. Tensile and corrosion tests were carried out in each heat-treated alloy. Chemical composition change and phase transformation were investigated by X-ray diffractometry(XRD) and energy dispersive spectroscopy (EDS). Morphologies of each as-cast and heat-treated alloy were observed by optical microscopy(OM) and scanning electron microscopy(SEM). Tensile strength and elongation of Co-Cr-Mo alloy were observed as 940 MPa and 18%, respectively, when the alloy was aged at 700℃ for 1 h after solid solution treatment and quenching. The mechanical properties of Co-Cr-Mo alloy were improved without retrogression of corrosion properties by solid solution treatment.