사회적 변화에 따라 정신질환자들의 피해망상 속에 나타난 박해자 유형변화

강승범,황인복,김한석,김승곤,김학렬,박상학,김상훈,황걸 朝鮮大學校 附設 醫學硏究所 2008 The Medical Journal of Chosun University Vol.33 No.3

Objective: The authors investigated the frequency of persecutors in persecutory delusions of the psychiatric patients who didn't undergo the arrest or traumatic injury, reside in Gwangju Jeonnam area, and were admitted to the hospital after the 5.18 prodemocracy movement in Gwangju in 1980 upward 10 years. Also this study investigated the frequency of the persecutors before and after the prodemocracy movement and in capital and Gwangju Jeonnam area. Subjects and Methods: Among the 896 patients who were admitted to department of psychiatry, Chosun University Hospital from Jan. 1. 1989 to Dec. 31. 1991, we choosed 144 patients with persecutory delusion who had lived in Gwangju Jeonnam area for 10 years after 5.18 prodemocracy movement as subjects. Persecutors were classified into 7 class: unspecified, family, neighbors, communist or spy, police or army or secret agent, impersonal, others. Results: 1) In our study, the frequency of persecutors was family, unspecified, neighbors, police or army or secret agent, impersonal, others, communist or spy in descending order. As compared to previous studies (1956-2003) including our study about frequency of persecutor at capital area and Gwangju Jeonnam area, and before and after 5.18 prodemocracy movement, 2) At capital area, in the early 1980s, police, family, neighbors, unspecified person was frequent in descending order. In the both of early 1970s, 1990s, neighbors, family, unspecified person, police was frequent in descending order. 3) At Gwangju Jeonnam area, in the early 1970s, family, unspecified person, neighbors, police was frequent in descending order. In the early 1990s, unspecified person and family, neighbors, police was frequent in descending order. 4) The police class was most frequent at capital area in the early 1980s. Conclusions: We suppose that class of persecutor in persecutory delusions of psychiatric patients are changing according to social change, and frequency of police class was decreasing in both of capital and Gwangju, Jeonnam area.

우심방을 침범한 거대 비호지킨씨 림프종 1예

강상범,진승원,이은경,박용현,최용호,김용주,박준철,김재형,홍순조,최규보,권종범,원용순,박건,이은희 대한순환기학회 2000 Korean Circulation Journal Vol.30 No.4

組織沒入의 影響變數와 過程模型에 관한 硏究

金範國,康承權 濟州大學校 觀光産業硏究所 1990 産經論集 Vol.4 No.-

The purpose of this thesis is to formulate a theoretical system on organizational commitment and to lay the foundation of empirical study hereafter. I made a historical survey of the researches on organizational commitment, examining factors affective on organizational commitment. I inquired into several process models that the previous researches lay out to explain the way employees got lost to the organizational commitment, suggesting an integrative organizational commitment model. These may be summarized as follows; 1. Each researcher gives different definitions on organizational commitment. But most researchers follow porter et al's definition. Namely, organizational commitment refers to the relative strength of an individual's identification with and involovement in a particular organization, and this consists of the following three structural elements. (a) a person's strong belief in and an acceptance of the organizations goals, (b) a person's willingness to exert considerable effort on behalf of the organization, and (c) a person's definite desire to maintain membership. 2. Each research also has a different opinion on the factors affective on organizational commitment. Several researchers are studying by setting up anticidents and outcomes or moderated variables. 3. In view of a process model that may illustrate how employees reach to the organizational commitment, I have examined not only R. H. Steer's models but also other organizational commitment process models proposed by a number of researchers. Therefore, this thesis presented an integrative organizational commitment model, by adding or substracting some variables on the basis of the results of the previous researches. We should admit that the validity of this research must be attested through empirical researches.

다발성 외상 후 횡문근융해증 환자에서의 손상초기 급성신부전의 예측인자

문중범,이강현,황성오,이진웅,한병근,최승옥,강성준 대한응급의학회 2001 대한응급의학회지 Vol.12 No.3

Background: Acute renal failure(ARF) is a serious complication of rhabdomyolysis after multiple trauma, and may increase morbidity and mortality. The aim of this study was to elucidate predicting factors for the development of ARF induced by rhabdomyolysis at an early stage of multiple trauma. Methods: This prospective, observational study was conducted at the emergency department of a level I trauma center. Patients with acute multiple trauma, whose plasma levels of creatine phosphokinase(CPK) were higher than 1,000 IU, were included in this study. We excluded patients with any history of myocardial infarction, stroke, underlying renal disease, and/or infectious disease. We collected clinical and laboratory data including age, heart rate, mean arterial blood pressure, injury severity score, serum myoglobin, lactic dehydrogenase, creating phosphokinase, and base excess. Collected data were compared between patients who had ARF and patients who did not have ARF. Results: Eighty-eight patients were enrolled in this study. Eighteen patients(20.5%) developed ARF. The injury severity score(ISS)(p=0.001), the base excess(p<0.001), CPK(p=0.003), and myoglobin(p<0.001) were higher in patients with ARF than in patient without ARF. Logistic regression analysis revealed that early predictors for ARF were high ISS, high base excess, high CPK, and high myoglobin. Conclusion: We could identify early predicting factors for acute renal failure induced by rhabdomyolysis, these factors included ISS, serum CPK and myoglobin, and base excess in the arterial blood gas analysis performed at the emergency department.

纖維補强이 콘크리트의 力學的 特性과 鐵筋콘크리트의 龜裂性狀에 미치는 影響에 關한 硏究

朴承範,姜信業 충남대학교 1977 工業技術開發硏究所論文集 Vol.4 No.2

This study was attempted to investigate the mechanical properties of concrete and crack control effects of reinforced concrete with steel and glass fiber. The experimental program includes tests on the properties of fresh concrete containing fibers, compressive strength, tensile strength, flexural strength, Young's modulus, Shrinkage and deformation of steel or glass fiber reinforced concrete. Also this study was carried out to investigate the effect of steel or glass fiber to retard the development in reinforced concrete subject to uniaxial tension and thus facilitate the use of steels of higher strength. The major conclusions that can be drawn from the studies are as follows: 1. The effect of the fibers in various mixes on fresh concrete confirmed that fibers do have a significant effect on the properties of fresh concrete, bringing much more stable and exhibiting a signiflcant reduction in surface bleeding, and that the cohesion is greatly improved and the internal resistance increases with fiber concentration. But the addition of an excess contents and length of fibers brings about the reduction of workablity. 2. With the addition of steel fibers (1.5% Vol.) to concrete, the compressive strength as compared with plain concrete showed a very slight increase, but excess addition, over 1.5% Vol. of steel and glass fiber reduced its strength. 3. Splitting tensile strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. In case of containing steel fiber (2.5% 30mm), it showed that the maximum increase rate of 1.48 times as much rate, and in case of containing glass fiber (2.5%, 30mm), the increase rate of strength was 1.25 times as much rate. 4. Flexural strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. Containing steel fiber (2.5%, 30mm) showed the maximum increase rate of 1.64 times as much rate and containing glass fiber (2.5%, 30mm) showed the increase rate of strength of 1.32 times as much rate, and in general, the 30mm length brougth the best results. 5. The strength ratio (σb/σc and σt/σc) increased, when steel fiber's average spacing was up to 3.05mm, but decreased when beyond 3.05mm, and it was confirmed that tensile or flexural strengths of steel fiber reinforceed concrete are apparently governed by fiber's average spacing. 6. The compressive strain of fiber reinforced concrete showed a significant increasing tendency as the fiber was added, but Young's modulus, with the addition of steel and glass fibers, showed a slight decrease tendency. And according to the increase of flexural strength, a considerable increase was seen in toughness. 7. With the addition of fiber's the shrinkage of concrete was significantly decreased, in both case of adding steel fibers or glass fibers 12.5%, 30mm, and showed a significant decrease ratio, in average 30.4% and 36.7%, as compared with plain concrete. 8. With the increase of fiber volume fraction and length, the gained stress in reinforcing bar in concrete specimens increased in all crack widths, but at different rates, with the decrease of fiber diameter, the stress showed a considerable increasing tendency. And the duoform steel fibers showed the greatest improvement, as compared with the other types tested. 9. The influence of fiber dimensions in order of significanse on the machanical properties of concrete and the crack control of reinforced concrete was explained as follows: content, length, aspect ratio and diameter.

교정력의 즉시 부하가 미니스크류의 제거 회전력에 미치는 영향의 평가

선승범,강윤구,김성훈,모성서,국윤아 대한치과교정학회 2007 대한치과교정학회지 Vol.37 No.6

교정치료에서 고정원의 조절은 교정 장치의 선택과 적용에서 가장 중요한 요소 중 하나이다. 이 연구의 목적은 교정용 미니스크류의 식립 즉시 교정력을 적용한 군과 교정력을 적용하지 않은 군의 제거회전력 측정과 조직학적 분석을 통해 즉시 교정력을 가한 미니스크류의 고정원으로서의 안정성을 확인하여 식립 후 교정력을 적용 수 있는 시기의 선택에 도움을 주고자 하는 것이다. 외경 1.6 mm, 길이 8 mm인 총 40개의 타이타늄 미니스크류를 10마리 가토의 경골에 식립하였다. 20개의 미니스크류 실험군은 식립 직후부터 6주동안 지속적인 200g의 교정력을 적용하였고 나머지 20개의 미니스크류 대조군은 교정력을 적용하지 않았다. 제거 회전력은 디지털 토크 게이지를 이용하여 측정하였으며 t-test를 이용하여 통계처리 하였고, 조직표본은 미니스크류를 제거한 후 H-E 염색하여 조직 소견을 관찰하였다. 제거회전력은 실험군과 대조군에서 통계학적으로 유의성 있는 차이를 보이지 않았으며, 조직학적으로 두 군간의 차이는 없었다. 본 연구의 결과는 교정용 미니스크류에 즉시 교정력을 가하더라도 안정적인 고정원으로 활용할 수 있다는 점을 제시한다. Objective: The purpose of this experimental study was to evaluate the effect of immediate orthodontic loading on the stability at the bone-implant interface of titanium miniscrews in a rabbit model. Methods: Forty titanium miniscrews (1.6 mm diameter, 8 mm length) were inserted in the tibiae of 10 rabbits. Twenty test group miniscrews were subjected to continuous orthodontic forces of 200g immediately after implantation for a period of 6 weeks. The remaining 20 control group miniscrews were left unloaded for the same follow-up interval. Removal torque values were recorded using a digital torque gauge. An independent t-test was performed. Results: All the miniscrews were stable, and exhibited no mobility or displacement throughout the experimental period. Histologically, miniscrews were well-integrated into bone. No statistically significant differences in removal torque data were found between the loaded test and the unloaded control groups. Conclusions: These findings suggest that titanium miniscrews can be used as anchoring units for orthodontic tooth movement immediately after insertion.

두가지 혈류 유발방법에 의한 새로운 심폐소생술(이중 혈류 유발 심폐소생술)장치의 개발

황성오,김현,조준휘,오범진,임종천,최경훈,윤정한,이승환,김영식,이강현,이윤선 大韓應急醫學會 1999 대한응급의학회지 Vol.10 No.2

Background: There have been many efforts to augment blood flow during cardiopulmonary resuscitation. These efforts have focused on maximizing the effect of cardiac pump or thoracic pump alone. However, considering that the heart is the biggest blood reservoir and increase of intrathoracic pressure can generate blood flow, simultaneous exploitation of both mechanisms may have synergistic effect. We hypothesized that simultaneous chest constriction in addition to sternal compression by standard CPR may have additive hemodynamic effects by preventing deformation of the chest and increase of intrathoracic pressure. Methods and results: we built a new mechanical device to perform compression and thoracic constriction simultaneously. The device consists of two main elements. Piston in the center is to depress the sternum. Strap is to constrict the thorax circumferentially. Strap is attached to both sides of the piston. When the piston is pushed down, it depresses the sternum and pulls on the thoracic strap. To determine strap width to produce optimal hemodynamic effect, we measured hemodynamic parameters with variable widths of strap in two dogs after induction of ventricular fibrillation. Result of the experiment showed that 10cm wide strap was determined to be most effective. We also determined optimal depth of compression to produce maximal hemodynamic effect with animal experiments using two dogs. Animal experiments showed that the highest aortic pressure could be generated when the stemum was depressed to 5 cm. Cardiopulmonary resusciation using a new device could generate higher systolic aortic pressure, coronary perfusion pressure and end-tidal carbon dioxide tension in comparison with standard cardiopulmonary resuscitation in a pilot animal study using two dogs. Conclusion: New cardiopulmonary resuscitation method using a mechanical device designed by us could perform sternal compression and simultaneous thoracic constriction, and generate better hemodynamic effects than standard cardiopulmonary resuscitation in pilot animal experiments.

인조 합성 테니스 바닥재의 지면 반력 분석

조승제,정미라,서국웅,박승범,윤양진,이훈식,강영택 釜山大學校 附設 體育科學硏究所 1998 體育科學硏究所 論文集 Vol.14 No.-

Some authors suggest that certain types of surfaces are the origin of such injuries. A few years after the first medical concerns about surfaces were voiced, publications of biomechanical measurements apperared, describing accleration, force, and impact measurement on different types of surfaces. In many sport activities, surfaces can be under very high dynamic load. This was the reason for the development of various methods for impact simulation, like the development of various methods for impact simulation, like the artificial athlete. Furthermore, it is important to collect information about the hardness of new and already existing surfaces in sport arenas. The idea on which this measuring system is based Is as follows: The stiffness of the material can be computed from the kinematics measurd at touch down of a rigid body onto a material sample. The results show the following The result for the artifical surfaces(Synpave ace) is surprising. It is known that these surfaces are much harder than synpave rebound classic, synpave spring. This finding suggests that it may be possible that the subjective impression is used as one criterion in the selection of landing(or style) strategies. The number of subjects in this experiment is too small to make statistically significant conclusions. It is shown analytically that when an object a deformable surface, the acceleration it experiences is inversely propotional to its mass. In future, it need to stress that the interaction between shoe and surface is important, and this aspect has now become well accepted. Considering biomechanical aspect in player's injury, it request Korean Standards for synthetic playing surfaces in sport like ASTM(America Society for Testing & Materials) standards of America, DIN 18035 standards of Germany, BSI standards of U.K.

주요우울증에 대한 Milnacipran의 효과 및 안정성 : Fluoxetine과의 비교

이민수,함병주,기백석,김정범,연병길,오강섭,오병훈,이철,정한용,지익성,최병무,백인호 大韓神經精神醫學會 2004 신경정신의학 Vol.43 No.4

Objectives : This 6-week, open label randomized, multicenter study was conducted to evaluate the antidepressant effect and safety of milnacipran and fluoxetine in patients with major depression. Methods : The study was done in patients with major depression diagnosed by DSM-IV who score ≥17 in 17 items Hamilton Rating Scale for Depression (17-item HAM-D) and score ≥25 in Montgomery and Asberg Depression Rating Scale (MADRS). A total of 87 patients were randomized to milnacipran group and fluoxetine group. In cases of the patients taking other antidepressants, 6 weeks of each medication was administered after 7 days of drug excretion period. The evaluation was done using 17 item HAM-D, MADRS, Clinical Global Impression Scale (CGI), and COVI scale after baseline, 1 week, 2 weeks, 4 weeks, and 6 weeks. The side effects that had occurred during the period of our study were put in records by developed/disappeared time, severities, incidences, managements and results. Results : A total of 87 patients were enrolled. 70 (mitnacipran group 39 ; fluoxetine group 31) of them were included for the 6 weeks of research and 17 of them dropped out with in the first week, not due to adverse reactions or deficiency of effects. Total 17 item HAM-D scores, total points of MADRS, and CGI showed significant decrease after 1 week in each treatment group and continued decrease after 2 weeks and 4, 6 weeks. But there was no difference between milnacipran group and fluoxetine group in the antidepressant effect. There were no significant changes in vital sign, CBC, chemistry, and EKG in each treatment group. The commonly reported side elfects of minlacipran were nausea (25.0%), headache (10.7%), vomiting (7.1%),constipation (7.1%), dizziness (7.1%) and those of fluoxetne were GI trouble (11.1%), diarrhea (11.1%), insomnia (11.1%),agitation (5.6%), and dizziness (5.6%). Conclusion : Milnacipran was effective for the improvement of depressive symptoms and was well tolerated and safe in patients with depression.

심경병성 근이영양증에 동반된 심근병증의 단기 성장호르몬 치료효과 1례

변기현,김동수,나준식,오수환,김인재,홍범기,권혁문,남수연,강성웅,김현승 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.8