Removal of sulfur element from high-sulfur coal by superconducting HGMS technology

Shuai-shuai Han,Su-qin Li,Rui-ming Yang,Chang-qiao Yang,Yi Xing 한국초전도.저온공학회 2019 한국초전도저온공학회논문지 Vol.21 No.2

Coal is the most abundant fossil fuel on Earth and is used in a wide range of applications. The direct combustion of high-sulfur coal produces a large amount of sulfur dioxide, which is a toxic and corrosive gas. A new superconducting high gradient magnetic separation (HGMS) technology was studied to remove sulfur from high sulfur coal. The magnetic separation concentrate was obtained under the optimum parameters, such as a particle size of -200 mesh, a magnetic field strength of 2.0 T, a slurry concentration of 15 g/L, and a slurry flow rate of 600 ml/min. The removal rate of sulfur is up to 59.9%. The method uses a magnetic field to remove sulfur-containing magnetic material from a pulverized coal solution. It is simple process with, high efficiency, and is a new way.

Removal of sulfur element from high-sulfur coal by superconducting HGMS technology

Han, Shuai-shuai,Li, Su-qin,Yang, Rui-ming,Yang, Chang-qiao,Xing, Yi The Korea Institute of Applied Superconductivity a 2019 한국초전도저온공학회논문지 Vol.21 No.2

Coal is the most abundant fossil fuel on Earth and is used in a wide range of applications. The direct combustion of high-sulfur coal produces a large amount of sulfur dioxide, which is a toxic and corrosive gas. A new superconducting high gradient magnetic separation (HGMS) technology was studied to remove sulfur from high sulfur coal. The magnetic separation concentrate was obtained under the optimum parameters, such as a particle size of -200 mesh, a magnetic field strength of 2.0 T, a slurry concentration of 15 g/L, and a slurry flow rate of 600 ml/min. The removal rate of sulfur is up to 59.9%. The method uses a magnetic field to remove sulfur-containing magnetic material from a pulverized coal solution. It is simple process with, high efficiency, and is a new way.

Fungal diversity in deep-sea sediments from Magellan seamounts environment of the western Pacific revealed by high-throughput Illumina sequencing

Shuai Yang,Wei Xu,Yuanhao Gao,Xiaoyao Chen,Zhu-Hua Luo 한국미생물학회 2020 The journal of microbiology Vol.58 No.10

There are lots of seamounts globally whose primary production is disproportionally greater than the surrounding areas. Compared to other deep-sea environments, however, the seamounts environment is relatively less explored for fungal diversity. In the present study, we explored the fungal community structure in deep-sea sediments from four different stations of the Magellan seamounts environment by using high-throughput sequencing of the ITS1 region. A total of 1,897,618 ITS1 sequences were obtained. Among these sequences, fungal ITS1 sequences could be clustered into 1,662 OTUs. The majority of these sequences belonged to Ascomycota. In the genera level, the most abundant genus was Mortierella (4.79%), which was reported as a common fungal genus in soil and marine sediments, followed by Umbelopsis (3.80%), Cladosporium (2.98%), Saccharomycopsis (2.53%), Aspergillus (2.42%), Hortaea (2.36%), Saitozyma (2.20%), Trichoderma (2.12%), Penicillium (2.11%), Russula (1.86%), and Verticillium (1.40%). Most of these recovered genera belong to Ascomycota. The Bray-Curtis analysis showed that there was 37 to 85% dissimilarity of fungal communities between each two sediment samples. The Principal coordinates analysis clearly showed variations in the fungal community among different sediment samples. These results suggested that there was a difference in fungal community structures not only among four different sampling stations but also for different layers at the same station. The depth and geographical distance significantly affect the fungal community, and the effect of depth and geographical distance on the structure of the fungal community in the Magellan seamounts is basically same. Most of the fungi were more or less related to plants, these plant parasitic/symbiotic/endophytic fungi constitute a unique type of seamounts environmental fungal ecology, different from other marine ecosystems.

White-Matter Hyperintensities and Lacunar Infarcts Are Associated with an Increased Risk of Alzheimer’s Disease in the Elderly in China

Shuai Ye,Shuyang Dong,Jun Tan,Le Chen,Hai Yang,Yang Chen,Zeyan Peng,Yingchao Huo,Juan Liu,Mingshan Tang,Yafei Li,Huadong Zhou,Yong Tao 대한신경과학회 2019 Journal of Clinical Neurology Vol.15 No.1

Background and Purpose This study investigated the contribution of white-matter hyperintensities (WMH) and lacunar infarcts (LI) to the risk of Alzheimer’s disease (AD) in an elderly cohort in China. Methods Older adults who were initially cognitively normal were examined with MRI at baseline, and followed for 5 years. WMH were classified as mild, moderate, or severe, and LI were classified into a few LI (1 to 3) or many LI (≥4). Cognitive function was assessed using the Mini Mental State Examination and the Activities of Daily Living scale. Results Among the 2,626 subjects, 357 developed AD by the end of the 5-year follow-up period. After adjusting for age and other potential confounders, having only WMH, having only LI, and having both WMH and LI were associated with an increased risk of developing AD compared with having neither WMH nor LI. Moderate and severe WMH were associated with an increased risk of developing AD compared with no WMH. Furthermore, patients with many LI had an increased risk of developing AD compared with no LI. Conclusions Having moderate or severe WMH and many LI were associated with an increased risk of developing AD, with this being particularly striking when both WMH and LI were present.

Integrated Optimization Design of Carbon Fiber Composite Framework for Small Lightweight Space Camera

Shuai Yang,Wei Sha,Changzheng Chen,Xingxiang Zhang,Jianyue Ren 한국광학회 2016 Current Optics and Photonics Vol.20 No.3

A Carbon Fiber Composite (CFC) framework was designed for a small lightweight space camera. According to the distribution characteristics of each optical element in the optical system, CFC (M40J)was chosen to accomplish the design of the framework. TC4 embedded parts were used to solve the lowaccuracy of the CFC framework interface problem. An integrated optimization method and the optimizationstrategy which combined a genetic global optimization algorithm with a downhill simplex local optimizationalgorithm were adopted to optimize the structure parameters of the framework. After optimization, thetotal weight of the CFC framework and the TC4 embedded parts is 15.6 kg, accounting for only 18.4%that of the camera. The first order frequency of the camera reaches 104.8 Hz. Finally, a mechanicalenvironment test was performed, and the result demonstrates that the first order frequency of the camerais 102 Hz, which is consistent with the simulation result. It further verifies the rationality and correctnessof the optimization result. The integrated optimization method mentioned in this paper can be applied tothe structure design of other space cameras, which can greatly improve the structure design efficiency.

Chemical Vapor Deposition Growth of Graphene Domains Across the Cu Grain Boundaries

Yang Wang,Yu Cheng,Yunlu Wang,Shuai Zhang,Chen Xu,Xuewei Zhang,Miao Wang,Yang Xia,Qunyang Li,Pei Zhao,Hongtao Wang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2018 NANO Vol.13 No.08

Many aspects in the chemical vapor deposition (CVD) growth of graphene remain unclear such as its behavior near the catalyst grain boundaries. Here we investigate the CVD growth mechanism of graphene across the Cu grain boundaries using unidirectional aligned graphene domains, which simplifies the analysis of both graphene and Cu to a large extent. We found that for a graphene domain grown across the Cu grain boundary, the domain orientation is determined by the Cu grain where the domain nucleation center is located, and the Cu grain boundary will not change the growth behavior for this graphene domain. This growth mechanism is consistent with the Custep-attached nucleation and edge-attachment-limited growth mechanism for H-terminated graphene domains and will provide more guidance for the synthesis of high-quality graphene with less domain boundaries.

Design and experimental evaluation of a nylon adaptive flywheel with variable inertia

Shuai Yang,Natalie Baddour,Chuan Li 대한기계학회 2021 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.35 No.10

This paper proposes an adaptive nylon flywheel, which can achieve passive vibration control by generating variable equivalent mass. With changing rotational speed, the location of sliders in the slots changes, which leads to the creation of variable equivalent mass. Due to the light weight and high strength of the nylon material, a higher changing ratio of equivalent mass can be achieved. To test the behavior of the adaptive nylon flywheel, the inverse screw system was applied to experiments. The accuracy of the mathematical model of the inverse screw system with a nylon adaptive flywheel was verified by experiments. It was experimentally demonstrated that the proposed adaptive nylon flywheel could generate the predicted variable caused by transmission backlash in the inverse screw system. The adaptive nylon flywheel also shows an ability to suppress spike forces under a low frequency and amplitude input. The proposed design and experimental evaluation pave the way towards the passive variable inertial mass control of vibration systems.

Risk Factors for Work-Related Musculoskeletal Disorders Among Intensive Care Unit Nurses in China: A Structural Equation Model Approach

Shuai Yang,Li Li,Liqian Wang,Jiaqi Zeng,Yinglan Li 한국간호과학회 2020 Asian Nursing Research Vol.14 No.4

Purpose: This study explored the direct and indirect effects of risk factors of work-related musculoskeletaldisorders (WRMDs) in nurses working in intensive care units (ICUs). Methods: A cross-sectional study design was used. ICU nurses from 28 tertiary hospitals in the Hunanand Guangdong provinces participated in a survey conducted via a self-reported online questionnaire. Astructural equation model was used to fit the data and to evaluate associations among WRMDs and riskfactors. Results: Valid questionnaire samples were submitted by 984 ICU nurses. The prevalence of WRMDswithin the previous year among ICU nurses was 96.8%. A valid structural equation model was constructed,and a good fit was shown: Chi-square value/degrees of freedom ¼ 2.248; comparative fitindex ¼ .931; normal fit index ¼ .905; goodness-of-fit index ¼ .978; adjusted goodness-of-fit index ¼.966; and root mean square error of approximation ¼ .036. All regression coefficients for direct effectreached significant levels (critical ratio > 1.96 and p < .05). In the structural equation model, theoccurrence of WRMDs was directly affected by the following: physical factors, risk perception, and jobstress. Physical factors and a safe environment indirectly affected WRMDs through risk perception andjob stress. The strongest correlations with WRMDs were physical factors. Conclusion: The model provided a new perspective for understanding the associations among physicalfactors, workplace safety environment, risk perception, job stress, and WRMDs. To improve the practicesetting of the ICU, efforts should be made to help prevent WRMDs from physical, psychosocial, andenvironmental factors.

Investigation of Large-scale Transmission Tower Grounding Grid with High Amplitude and Uniform Flowing Impulse Current

Shuai Yang,Jiarui Huang,Shaodong Wei,Wenjun Zhou 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.5

Impulse characteristic of transmission tower grounding grid is needed for lightning protection of transmission line. This paper describes an outdoor experimental test facility established for large-scale grounding grid of transmission tower, made up of four impulse current generators and a circle current return electrode. The amplitude of impulse current is up to 100 kA. The results of the CDEGS simulation and GPR measurement reveal the uniform current distribution in the test arrangement. An impulse test for a square electrode with extended conductors is carried out in condition of three current waveforms with different amplitude. Based on the electrical network model and iterative algorithm method, a calculation model is proposed to simulate the impulse characteristic of large-scale grounding grid considering soil ionization. The curve of impulse resistance against the current amplitude shows the soil ionization both from the simulation and test. Deviation between the simulation and test result is less than 15%.

Investigation of Large-scale Transmission Tower Grounding Grid with High Amplitude and Uniform Flowing Impulse Current

Yang, Shuai,Huang, Jiarui,Wei, Shaodong,Zhou, Wenjun The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.5

Impulse characteristic of transmission tower grounding grid is needed for lightning protection of transmission line. This paper describes an outdoor experimental test facility established for large-scale grounding grid of transmission tower, made up of four impulse current generators and a circle current return electrode. The amplitude of impulse current is up to 100 kA. The results of the CDEGS simulation and GPR measurement reveal the uniform current distribution in the test arrangement. An impulse test for a square electrode with extended conductors is carried out in condition of three current waveforms with different amplitude. Based on the electrical network model and iterative algorithm method, a calculation model is proposed to simulate the impulse characteristic of large-scale grounding grid considering soil ionization. The curve of impulse resistance against the current amplitude shows the soil ionization both from the simulation and test. Deviation between the simulation and test result is less than 15%.