Conceptual Study for Tissue-Regenerative Biodegradable Magnesium Implant Integrated with Nitric Oxide-Releasing Nanofi bers

Jin‑Kyung Jeon,Hyunseon Seo,Jimin Park,Soo Ji Son,Yeong Rim Kim,Eun Shil Kim,Jong Woong Park,Woong‑Gyo Jung,Hojeong Jeon,Yu‑Chan Kim,Hyun‑Kwang Seok,Jae Ho Shin,Myoung‑Ryul Ok 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.4

The excessive initial corrosion rate of Mg is a critical limitation in the clinical application of biodegradable Mg implantsbecause the device loses its fi xation strength before the fractured bone heals. This study suggests a new approach to overcomethis hurdle by accelerating tissue regeneration instead of delaying the implant biodegradation. As angiogenesis is anessential process in early bone regeneration, a Mg implant coated with electrospun nanofi bers containing nitric oxide (NO),which physiologically promotes angiogenesis, is designed. The integrated device enables adjustable amounts of NO to bestored on the NO donor-conjugated nanofi ber coating, stably delivered, and released to the fractured bone tissue near theimplanted sites. An in vitro corrosion test reveals no adverse eff ect of the released NO on the corrosion behavior of the Mgimplant. Simultaneously, the optimal concentration level of NO released from the implant signifi cantly enhances tube networkformation of human umbilical vein endothelial cells without any cytotoxicity problem. This indicates that angiogenesis canbe accelerated by combining NO-releasing nanofi bers with a Mg implant. With its proven feasibility, the proposed approachcould be a novel solution for the initial stability problem of biodegradable Mg implants, leading to successful bone fi xation.

폴리에스테르 섬유 감량시스템용 프로세서 타이트레이터 개발

조진호,이흥락,이종현,김명남,구성모,김무영,진경찬,유병희,강민수,김국진 경북대학교 센서기술연구소 1993 연차보고서 Vol.1993 No.-

폴리에스테르 섬유 감량시스템의 제어를 위해서는 처리조 내에서 감량되는 섬유가 목표 감량치에 도달했는지를 판단해 주는 장치가 필요하다. 본 연구에서는 가성소다용액의 초농도 및 섬유 감량 정도의 정확한 측정과 감량 종료시간의 산출 및 이에 따른 종료신호를 발생할 수 있는 폴리에스테르 섬유 감량기 전용의 자동적정장치를 개발하였다. To control caustic soda treatment system for the polyester fabric reduction, we need the device to determine that the fabric has been arrived target reduction value. In this study, we develope an automatic process titrator for the caustic soda treatment system. Major functions of the target titrating system are accurate measurements of the caustic soda concentration and then producing the end point signal for caustic soda treatment system.

Fuzzy 목적계수 및 RHS를 갖는 선형계획 문제

진찬용,허철부 明知大學校 經濟硏究所 1989 경영연구 Vol.5 No.1

The purpose of this paper is to study the imprecision in linear programming problem. The imprecision in linear programming problem is classified into tow types. Type one is to deal with the imprecision of objective function coefficients and type two is to deal with the imprecision of RHS. A solution procedure is proposed for this two types using the fuzzy approach which has become accepted as a tool for dealing with a certain form of imprecision inherent to multiobjective decision making environment.

한국형 후각검사 KVSS Test의 개발

홍석찬,유영석,김은서,김석천,박수홍,김진국,강성호 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.7

오존노출이 실험적으로 유발된 알레르기성 비염에 미치는 영향

전우진,변상내,김용민,김병국,나기상,박찬일 대한이비인후과학회 2000 대한이비인후과학회지 두경부외과학 Vol.43 No.11

근관확대 및 세척 주사바늘의 근관 내 위치가 치근단 3 mm 부위의 근관 세정에 미치는 영향

문호진,홍찬의 大韓齒科保存學會 2012 Restorative Dentistry & Endodontics Vol.37 No.1

Objectives: The aim of this study was to test the hypothesis, that the effectiveness of irrigation in removing smear layer in the apical third of root canal system is dependent on the depth of placement of the irrigation needle into the root canal and the enlargement size of the canal. Materials and Methods: Eighty sound human lower incisors were divided into eight groups according to the enlargement size (#25, #30, #35 and #40) and the needle penetration depth (3 mm from working length, WL-3 mm and 9 mm from working length, WL-9 mm). Each canal was enlarged to working length with Profile.06 Rotary Ni-Ti files and irrigated with 5.25% NaOCl. Then, each canal received a final irrigation with 3 mL of 3% EDTA for 4 min, followed by 5 mL of 5.25% NaOCl at different level (WL-3 mm and WL-9 mm) from working length. Each specimen was prepared for the scanning electron microscope (SEM). Photographs of the 3mm area from the apical constriction of each canal with a magnification of ×250, ×500, ×1,000, ×2,500 were taken for the final evaluation. Results: Removal of smear layer in WL-3 mm group showed a significantly different effect when the canal was enlarged to larger than #30. There was a significant difference in removing apical smear layer between the needle penetration depth of WL-3 mm and WL-9 mm. Conclusions: Removal of smear layer from the apical portion of root canals was effectively accomplished with apical instrumentation to #35/40 06 taper file and 3 mm needle penetration from the working length.

SVD 알고리즘 및 HMM을 이용한 얼굴 및 눈 패턴 검출

진경찬,김명남,신장규,손병기,조진호 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1

The studies about automatic pattern detection of the eye and face from the human image acquired by the CCD image sensor have good applicabilities in the industry, home automation, and data communication field. In general, pattern detection method consists of feature based matching and template matching. In feature based matching, the feature vector is extracted with DLM(dynamic linking matching), EBGM(elastic bunch graph matching), HMM(hidden markov model) matching and knowledge based matching using statistical characteristics. In template matching, in general, the template vector is extracted with PCA(principal component analysis). When these method applied in the face and eye detection, each method has its own merits and some disadvantage. Therefore, by combined utilization of SVD(singular value decomposition) and HMM algorithm, is expected that we can selectively make use of each methods advantage and it result in improved detection accuracy. In this paper, we proposed the method for face and eye detection, which was combined by the two algorithms, to be suitable for the high speed image processing using DSP chip or microprocessor. In the beginning, template matching was followed by a template extraction using batch SVD algorithm and then face pattern was classified and recognized by HMM algorithm which is one of feature based matching technique. Finally, eye pattern detection was performed by pattern search neural network utilizing eigeneye image.

소요동력 절감을 위한 트랙터용 로타리 커버의 개발

오종진,김기대,이현동,김찬수,김성환,나건영 충남대학교 농업과학연구소 2002 농업과학연구 Vol.29 No.2

본 연구에서는 로타리 경운작업시 흙 부착이 가장 많이 되고 소요동력에 큰 영향을 미치는 로타리 커버 내측에 흙이 부착되는 것을 방지하여 경운 소요동력의 절감에 기여할 수 있는 로타리 커버를 개발하는데 목적이 있으며, 그 구체적인 연구결과는 다음과 같다. 1. 본 연구의 수행을 위하여 트랙터의 로타리 경운소요동력을 측정하고자 트랙터 PTO축과 로타리 동력 입력축을 연결하는 PTO 동력 전달축을 이용하여 로타리 경운 소요동력 측정장치를 설계, 제작하였다. 2. 로타리에 장착한 흙부착 방지장치의 재질로는 스테인리스 스틸, 고무, PE 등을 사용하였다. 흙부착 방지장치 장착 로타리를 이용하여 로타리 경운시험을 통한 경운 소요동력을 측정한 결과 평균 일반 로타리는 52.18ps, 스테인리스 스틸재질 장착 로타리는 52.44ps, 고무재질 장착 로타리는 49.01ps, 그리고 PE재질 장착 로타리는 46.34ps의 소요동력을 나타냈다. 3. 흙부착 방지장치 장착 로타리를 이용하여 로타리 경운시험 후 부착된 흙의 양을 조사한 결과 평균 일반 로타리는 5.6㎏, 스테인리스 스틸재질 장찰 로타리는 5.7㎏, 고무재질 장착 로타리는 3.1㎏, 그리고 PE재질 장착 로타리는 2.7㎏으로 나타났다. 4. 실험결과를 토대로 유의수준 5%의 모평균 차에 의한 검정으로 분석해본 결과 스테인리스 스틸재질의 경우 흙부착 방지효과가 없는 것으로 나타났으며, 고무와 PE재질의 경우에 방지 효과가 있는 것으로 나타났다. 그 중 PE 재질이 소요동력과 흙부착 방지에 각각 11%, 52%의 감소효과가 있어 소요동력 감소 및 흙부착 방지 효과가 탁월한 것으로 나타났다. This study aims at investigating the realities of tractor rotary tilling and paving operations performed by farm families in the central part of the country, measuring the power requirement so as to find the energy-saving factors for tractor rotary tilling, and designing a device to prevent soil adherence to the inside of the rotary cover-this part is the most subject to soil adherence and affects the power requirement. As a result of rotary tilling tests using rotaries equipped with a soil adherence preventer, the power requirement values were measured to be 52.18, 52.44, 49.01 and 46.34 PS for general, stainless steel, rubber and PE rotaries, and as a results of measurement of the quantities of the sod adhered to rotaries after their tilling tests, on the average, the quantities were measured to be 5.6, 5.7, 3.1 and 2.7㎏ for general, stainless steel, rubber and PE rotaries, respectively. The PE rotary cover reduced the power requirement and soil adherence by 11 and 52%, respectively.

2002학년도 조선대학교 신입생 특성 분석

류찬수,김강진 조선대학교 학생지도연구소 2003 生活指導硏究 Vol.22 No.1

초등학교 5학년 실과 『우리 생활과 전기·전자』 단원의 ICT활용 교수-학습과정안 개발

이찬웅,김진수 韓國實科敎育硏究學會 2002 實科敎育硏究 Vol.8 No.1

The purpose of this study was to raise the effectiveness of learning and teaching through developing lesson plans based on ICT for electrical · electronic units in elementary practical arts of 5th grade at elementary school in the 7th national curriculum. This study was conducted by dividing into four stage(the analysis stage, the design stage, the development stage, the evaluation stage) for this purpose. For the analysis stage, after the units required to develop were selected and teaching objectives were identified, objects that lesson plans based on ICT were applied to and teaching-learning setting were grasped and the learners' final behaviors were described in detail and the content analysis were systematized. For the design stage, teaching guidance based on ICT for accomplishing learning objectives was made and its application to elementary practical arts education was invested. For the development stage, Power-Point 2000 as the writing tool which is easy to make out, correct, and edit their presentation was used. For the evaluation stage, After self evaluation and expert evaluation were conducted to identify the problems and content's errors of the developed lesson plans based on ICT, lesson plans were corrected, made up for, and completed by their results. The results of this study tested by the experts were as follows : As these lesson plans were gotten the positive marks more than the average in the three domains of the teaching plan domain, the teaching process domain, and the evaluation & the rest, it showed that they were effective materials giving a high learning drive. According to this, lesson plans based on ICT as materials to raise teaching-learning effectiveness are required.