http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Li, Xiaopeng,Xiao, Yanjun,Bang, Jin Ho,Lausch, Dominik,Meyer, Sylke,Miclea, Paulx2010,Tiberiu,Jung, Jinx2010,Young,Schweizer, Stefan L.,Lee, Jungx2010,Ho,Wehrspohn, Ralf B. WILEY‐VCH Verlag 2013 ADVANCED MATERIALS Vol.25 No.23
<P><B>Through metal‐assisted chemical etching (MaCE), superior purification of dirty Si is observed</B>, from 99.74 to 99.9884% for metallurgical Si and from 99.999772 to 99.999899% for upgraded metallurgical Si. In addition, large area of silicon nanowires (SiNW) are fabricated. The purification effect induces a ∼35% increase in photocurrent for SiNW based photoelectrochemical cell.</P>
Jiang, Y-L,Li, N,Fan, X-Z,Xiao, L-R,Xiang, R-L,Hu, X-X,Du, L-X,Wu, C-X Asian Australasian Association of Animal Productio 2002 Animal Bioscience Vol.15 No.11
A T$\longrightarrow$A mutation in the promoter region of porcine myostatin (MSTN) gene has been identified in our previous work. This study analyzed the associations of the myostatin genotypes (TT, TA) caused by this mutation with birth weigh in Yorkshire pigs. Data from 211 unrelated individuals were collected three times from one breeding farm. Detections of the mutation were carried out by PCR-RFLPs approach. The effects of MSTN genotypes (TT and TA) on birth weight were compared by least square means. The results showed that for birth weight of Yorkshire pigs, individuals with TA genotype were significantly higher than those with TT genotype (p<0.05), and the birth weight for pigs with TA genotype were 1.37 kg in average but only 1.25 kg for pigs with TT genotype, indicating a positive effect of birth weight for A allele.
Quantitative Trait Loci Mapping for Porcine Backfat Thickness
Wu, X.L.,Lee, C.,Jiang, J.,Peng, Y.L.,Yan, H.F.,Yang, S.L.,Xiao, B.N.,Liu, X.C.,Shi, Q.S. Asian Australasian Association of Animal Productio 2002 Animal Bioscience Vol.15 No.7
A partial genome scan using porcine microsatellites was carried out to detect quantitative trait loci (QTL) for backfat thickness (BFT) in a pig reference population. This population carried QTL on chromosomes 1, 13 and 18. The QTL on chromosome 1 was located between marker loci S0113 and SW1301. The QTL corresponded to very low density lipoprotein receptor gene (VLDLR) in location and in biological effects, suggesting that VLDLR might be a candidate gene. The QTL found on chromosome 13 was found between marker loci SWR1941 and SW864, but significance for the marker-trait association was inconsistent by using data with different generations. The QTL on chromosome 18 was discovered between markers S0062 and S0117, and it was in proximity of the regions where IGFBP3 and GHRHR were located. The porcine obese gene might be also a candidate gene for the QTL on chromosome 18. In order to understand genetic architecture of BFT better, fine mapping and positional comparative candidate gene analyses are necessary.
Mapping a Quantitative Trait Locus for Growth and Backfat on Porcine Chromosome 18
Wu, X.L.,Lee, C.,Jiang, J.,Peng, Y.L.,Yang, S.L.,Xiao, B.N.,Liu, X.C.,Shi, Q.S. Asian Australasian Association of Animal Productio 2001 Animal Bioscience Vol.14 No.12
A QTL was localized near S0120 on porcine chromosome 18. The QTL was significant (p<0.05) for average daily gain (ADG) of body weight and backfat thickness (BFT). The estimates of additive and dominance effects for the QTL were 0.0135 kg/day (p<0.001) and 0.0138 kg/day (p>0.5) for ADG and 1.6115 mm (p<0.001) and 0.9281 mm (p>0.05) for BFT. The location of this QTL coincided with a few growth hormone pathway genes. This study suggested that a QTL allele probably resulted from a mutation responsible for physiological lipase deficiency favoring obesity. This QTL might be important to obesity as well as growth in pigs.
P. Z. Si,X. L. Wang,X. F. Xiao,H. J. Chen,X. Y. Liu,L. Jiang,J. J. Liu,Z. W. Jiao,H. L. Ge 한국자기학회 2015 Journal of Magnetics Vol.20 No.3
Cr₂O₃ nanoparticles were prepared via one-step reactive laser ablation of Cr in oxygen. The metastable CrO₂ phase was obtained through the subsequent oxidation of Cr₂O₃ nanoparticles under O₂ with gas pressures of up to 40 MPa. The as-prepared Cr₂O₃ nanoparticles are spherical or rectangular in shape with sizes ranging from 20 nm to 50 nm. High oxygen pressure annealing is effective in producing meta-stable CrO₂ from as-dried Cr₂O₃ nanoparticles, and the Cr₂O₃ nanoparticles exhibit a weak ferromagnetic behavior with an exchange bias of up to 11 mT that can be ascribed to the interfacial exchange coupling between uncompensated surface spins and the antiferromagnetic core. The Cr₂O₃/CrO₂ nanoparticles exhibit an enhanced saturation magnetization and a reduced exchange bias with an increasing faction of CrO₂ due to the elimination of uncompensated surface spins over the Cr₂O₃ nanoparticles when exposed to a high pressure of O₂ and/or possible phase segregation that results in a smaller grain size for both Cr₂O₃ and CrO₂.
Genetic Variability of mtDNA Sequences in Chinese Native Chicken Breeds
Liu, Z.G.,Lei, C.Z.,Luo, J.,Ding, C.,Chen, G.H.,Chang, H.,Wang, K.H.,Liu, X.X.,Zhang, X.Y.,Xiao, X.J.,Wu, S.L. Asian Australasian Association of Animal Productio 2004 Animal Bioscience Vol.17 No.7
The variability of mtDNA hypervariable segment I (HVS I) sequences was investigated in a total of 48 birds belonging to 12 Chinese native chicken breeds. Sixteen haplotypes were identified from 35 polymorphic nucleotide sites which accounted for 6.4% of a sequenced 544 bp fragment. Diversity analysis of the haplotypes showed that Tibetan, Langshan and Henan cockfight chicken had only one haplotype, while ancient haplotypes existed in Taihe silky and Chahua chicken. Phylogenetic analysis of the haplotypes suggested that Chinese native chicken breeds shared 5 maternal lineages and some breeds would share the same maternal lineage, regardless of their external features and ecological types. Both divergent and phylogenetic analysis of the haplotypes indicated the close genetic relationships between the Chinese native chicken breeds and G. g. gallus and G. g. spadiceus from different areas, which implied that G. g. gallus and G. g. spadiceus were the original ancestors of the Chinese native chicken breeds.
Xiao, G.,Qiao, X.,Li, G.,Huang, Z.,Li, L. The Korean Society of Automotive Engineers 2007 International journal of automotive technology Vol.8 No.4
This paper experimentally investigates the effects of oxygen-enriched air (OEA) on the running behaviors of an LPG SI engine during both start/warm-up (SW) and hot idling (HI) stages. The experiments were performed on an air-cooled, single-cylinder, 4-stroke, LPG SI engine with an electronic fuel injection system and an electrically-heated oxygen sensor. OEA containing 23% and 25% oxygen (by volume) was supplied for the experiments. The throttle position was fixed at that of idle condition. A fueling strategy was used as following: the fuel injection pulse width (FIPW) in the first cycle of injection was set 5.05 ms, and 2.6 ms in the subsequent cycles till the achieving of closed-loop control. In closed-loop mode, the FIPW was adjusted by the ECU in terms of the oxygen sensor feedback. Instantaneous engine speed, cylinder pressure, engine-out time-resolved HC, CO and NOx emissions and excess air coefficient (EAC) were measured and compared to the intake air baseline (ambient air, 21% oxygen). The results show that during SW stage, with the increase in the oxygen concentration in the intake air, the EAC of the mixture is much closer to the stoichiometric one and more oxygen is made available for oxidation, which results in evidently-improved combustion. The ignition in the first firing cycle starts earlier and peak pressure and maximum heat release rate both notably increase. The maximum engine speed is elevated and HC and CO emissions are reduced considerably. The percent reductions in HC emissions are about 48% and 68% in CO emissions about 52% and 78%; with 23% and 25% OEA, respectively, compared to ambient air. During HI stage, with OEA, the fuel amount per cycle increases due to closed-loop control, the engine speed rises, and speed stability is improved. The HC emissions notably decrease: about 60% and 80% with 23% and 25% OEA, respectively, compared to ambient air. The CO emissions remain at the same low level as with ambient air. During both SW and HI stages, intake air oxygen enrichment causes the delay of spark timing and the increased NOx emissions.
Buckling of axially graded columns with varying power-law gradients
X.-F. Li,L. Lu,Y. Huang,B.J. Xiao 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.45 No.4
This paper studies the static stability of an axially graded column with the power-law gradient varying along the axial direction. For a nonhomogeneous column with one end linked to a rotational spring and loaded by a compressive force, respectively, an Euler problem is analyzed by solving a boundary value problem of an ordinary differential equation with varying coefficients. Buckling loads through the characteristic equation with the aid of the Bessel functions are exactly given. An alternative way to approximately determine buckling loads through the integral equation method is also presented. By comparing approximate buckling loads with the exact ones, the approximate solution is simple in form and enough accurate for varying power-law gradients. The influences of the gradient index and the rotational spring stiffness on the critical forces are elucidated. The critical force and mode shapes at buckling are presented in graph. The critical force given here may be used as a benchmark to check the accuracy and effectiveness of numerical solutions. The approximate solution provides a feasible approach to calculating the buckling loads and to assessing the loss of stability of columns in engineering.