A global unique solvability of entropic weak solution to the one-dimensional pressureless Euler system with a flocking dissipation

Ha, S.Y.,Huang, F.,Wang, Y. Academic Press 2014 Journal of differential equations Vol.257 No.5

We present a unique global solvability and flocking estimate of an entropic weak solution to the one-dimensional pressureless Euler system with a flocking dissipation in all-to-all coupling setting. This model appears naturally as a quasi-equilibrium model for hydrodynamic description of Cucker-Smale flocking. For the unique global solvability, we adopt the variation approach from Ding and Huang's work [19] on the inhomogeneous pressureless gas dynamic model. When initial mass and velocity are locally integrable and bounded measurable functions, respectively, we give explicit representations for the global entropic weak solutions. Our results do not require any smallness of initial data except that initial mass density is almost everywhere positive.

차세대 가속기용 공동형 빔위치 측정기 개발

Kim S.H.,Park Y.J.,Hwang W.H.,Huang J.Y.,Honda Y.,Inoue Y. 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.4

국제 직선형 충돌 가속기 (ILC; International Linear Collider). 자유전자 레이저 (FEL: Free Electron Laser)와 같은 차세대 가속기에 사용 할 공동형 빔위치 측정기 ( 공동형 BPM: cavity-type beam position monitor)를 일본 고에너지 연구소 (KEK; High Energy Accelerator Research Organization)와 공동으로 개발하였다. ILC 및 FEL의 운전을 위해서는 빔 기반 정렬 (beam-based alignment)과 되먹임 장치 (feedback system)가 필수적으로 요구되는데, 이를 위해서는 적절한 위치에 서브마이크론의 분해능을 지닌 빔위치 측정기를 설치하여야 한다 [1]. 공동형 BPM은 기계적인 정밀도에 매우 민감하므로 정밀한 제작과 미세한 기계적 조정을 통하여 성능을 달성하게 된다. 우리는 제작 오차를 줄이기 위하여 공진 공동, 빔 튜브, 도파관, 전기도입기 등 모든 부품을 조립 후 한꺼번에 진공 브레이징 하였다. 공동의 외주면에는 네 개의 튜닝 핀을 두어 공진주파수 및 x-y 격리도 (x-y isolation between coupled waveguide)를 미세 조정할 수 있도록 하였다. 현재 개발된 공동형 BPM 은 공진주파수는 6.422 GHz 이며, 공동 내경은 53.822 mm, 빔의 위치 측정 범위는 ${\pm}250 {\mu}m$이다. network analyzer를 관측하면서 튜닝핀을 이용하여 x-y 격리도를 -40 dB 이하로 조정할 수 있었다. 실제 KEK ATF2에서의 전자빔을 이용한 시험에서 신호의 모양, x-y 격리도, 민감도 등에서 만족한 결과를 얻었다. Cavity-type beam position monitors were developed in collaboration with KEK to use for the future accelerators such as international linear collider (ILC) or x-ray free electron laser (XFEL) in PAL. BPM components such as BPM cavity, beam tubes, waveguides and feedthroughs were assembled by brazing at the same time to reduce mechanical errors during the fabrication. There are four screwed pins around outer rim of the cavity for the tuning of cavity frequency and x-y isolation. The resonance frequency of BPM is 6.422 GHz, the inner diameter of cavity is 53.822 mm, and the range of mechanical adjusting is $+ / - 250{\mu}m$. The x-y isolation was measured better than -40 dB after tuned. Test results of signal forms, x-y isolations, sensitivities are satisfied within requirements for the KEK ATF2 beam line.

A Fe-based Metallic Glass Bilayer Membrane for Biochip Micropump Application

( Y. F. Huang ),( Z. Y. Wang ),( Y. Y. Chen ),( C. C. Liao ),( Y. C. Tsai ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1

This paper presents a Fe-based (Fe₇₆Si₉B₁₀P₅) metallic glass (MG) bilayer membrane for bio-chip micropump application. A Fe-based metallic glass integrated with a polydimethylsiloxane (PDMS) diaphragm is proposed and developed for an actuation membrane in this work. An actuation bilayer membrane integrated Fe-based metallic glass and PDMS diaphragm by the standard MEMS fabrication process is proposed and developed in this work. The permanent magnets on two sides are employed for polarizing the Fe-based metallic glass thin film. The magnetic field generated by the coil underneath the actuation membrane is used to attract and repel the actuation bilayer membrane. Different sputtering conditions were carried out for optimizing the Fe-based metallic glass process. The deflection of the fabricated actuation bilayer membrane was measured by laser displacement sensor. As the frequency continuously increases, the magnetic field generated by the coil decreases. The maximum magnetic field is 140 G. When 1 Hz AC 20 voltage was applied to the magnetic coil, the maximum deflection of the actuation bilayer membrane is 5 μm. The characterization experiments reveal that the Fe-based MG actuation membrane can be driven by the external electromagnetic force.

Dietary Requirement of True Digestible Phosphorus and Total Calcium for Growing Pigs

Ruan, Z.,Zhang, Y.-G.,Yin, Y.-L.,Li, T.-J.,Huang, R.-L.,Kim, S.W.,Wu, G.Y.,Deng, Z.Y. Asian Australasian Association of Animal Productio 2007 Animal Bioscience Vol.20 No.8

Sixty healthy growing pigs ($Duroc{\times}Landrace{\times}Yorkshire$ with an average BW of 21.4 kg) were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. Pigs were assigned randomly to one of five dietary treatments (12 pigs/diet), representing five levels of TDP (0.16%, 0.20%, 0.23%, 0.26% and 0.39%). There were three replications per treatment, with four pigs (2 barrows and 2 gilts) in each replication (2 pigs/pen) A randomized-block design was used, with pen as the experimental unit. Experimental diets were formulated to provide the 5 TDP levels with a total calcium (Ca) to TDP ratio of 2:1, and offered to pigs at 5% BW for 28 d. The total Ca contents of the five diets were 0.33, 0.38, 0.45, 0.51 and 0.79%, respectively. During the 28-d experimental period, the ADG of pigs was affected by dietary TDP levels as described by Equation 1: y = $-809,532x^4+788,079x^3-276,250x^2+42,114x-1$,759; ($R^2$ = 0.99; p<0.01; y = ADG, g/d; x = dietary TDP, %). The feed:gain ratio for pigs was affected by dietary TDP levels as described by Equation 2: y = $3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2$ = 0.99; p<0.01; y = feed:gain ratio; x = dietary TDP, %). Total P concentrations in serum were affected by dietary TDP levels as described by Equation 3: y = $-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ ($R^2$ = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest feed:gain ratio (1.07), and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet (e.g., 5.1 g/day for a 30-kg pig that consumed 1.5 kg feed daily) at a total Ca to TDP ratio of 2:1.

True Digestibility of Phosphorus in Different Resources of Feed Ingredients in Growing Pigs

Wu, X.,Ruan, Z.,Zhang, Y.G.,Hou, Y.Q.,Yin, Y.L.,Li, T.J.,Huang, R.L.,Chu, W.Y.,Kong, X.F.,Gao, B.,Chen, L.X. Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.1

To determine the true digestible phosphorus (TDP) requirement of growing pigs, two experiments were designed with the experimental diets containing five true digestible P levels (0.16%, 0.20%, 0.23%, 0.26% and 0.39%) and the ratio of total calcium to true digestible P (TDP) kept at 2:1. In Experiment 1, five barrows (Duroc${\times}$Landrace${\times}$Yorkshire) with an average initial body weight of 27.9 kg were used in a $5{\times}5$ Latin-square design to evaluate the effect of different dietary P levels on the digestibility and output of P and nitrogen. In Experiment 2, sixty healthy growing pigs (Duroc${\times}$Landrace${\times}$Yorkshire) with an average body weight (BW) of 21.4 kg were assigned randomly to one of the five dietary treatments (12 pigs/diet), and were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. The results indicated that the true digestibility of P increased (p<0.05) linearly with increasing dietary TDP level below 0.26%. The true P digestibility was highest (56.6%) when dietary TDP was 0.34%. Expressed as g/kg dry matter intake (DMI), fecal P output increased (p<0.05) linearly with increasing P input. On the basis of g/kg fecal dry matter (DM), fecal P output was lowest for Diet 4 and highest (p<0.05) for Diet 5. The apparent digestibility of crude protein (CP) did not differ (p>0.05) among the five diets, with the average nitrogen output of 12.14 g/d and nitrogen retention of 66% to 74% (p>0.05), which suggested that there was no interaction between dietary P and CP protein levels. During the 28-d experimental period of Experiment 2, the average daily gain (ADG) of pigs was affected by dietary TDP levels as described by Eq. (1): $y=-809,532x^4+788,079x^3-276,250x^2+42,114x-1,759$; ($R^2=0.99$; p<0.01; y = ADG, g/d; x = dietary TDP, %), F/G for pigs by Eq. (2): $y=3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2=0.99$; p<0.01; y = F/G; x = dietary TDP, %), and Total P concentrations in serum by Eq. (3): $y=-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ (R2 = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest F/G (1.07) and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet at a total Ca to TDP ratio of 2:1.

Anisotropy-dominated Magnetic Interactions in Semiconductor Nanostructures

Y. L. Huang,C. I. Lin,S. L. Wnag,S. F. Yeh 한국자기학회 2008 한국자기학회 학술연구발표회 논문개요집 Vol.- No.-

Medicolegal Aspects of Brain Death : The Problem in Intensive Crae Units

Huang, C.Y. Medical Publications Korea 1987 Medical Progress Vol.9 No.9

Integration of health monitoring and vibration control for smart building structures with time-varying structural parameters and unknown excitations

Y.L. Xu,Q. Huang,Y. Xia,H.J. Liu 국제구조공학회 2015 Smart Structures and Systems, An International Jou Vol.15 No.3

When a building structure requires both health monitoring system and vibration control system,integrating the two systems together will be cost-effective and beneficial for creating a smart buildingstructure with its own sensors (nervous system), processors (brain system), and actuators (muscular system). This paper presents a real-time integrated procedure to demonstrate how health monitoring and vibrationcontrol can be integrated in real time to accurately identify time-varying structural parameters and unknownexcitations on one hand, and to optimally mitigate excessive vibration of the building structure on the otherhand. The basic equations for the identification of time-varying structural parameters and unknownexcitations of a semi-active damper-controlled building structure are first presented. The basic equations forsemi-active vibration control of the building structure with time-varying structural parameters and unknownexcitations are then put forward. The numerical algorithm is finally followed to show how the identificationand the control can be performed simultaneously. The results from the numerical investigation of anexample building demonstrate that the proposed method is feasible and accurate.

Study on Ultrathin Co/ZnO(002) Crystal Surface by Magneto-optical Faraday Effect

Y. C. Chang,C. W. Su,M.S. Huang,T. S. Tsai,Y. H. Lee,J. C. Lee 한국자기학회 2008 한국자기학회 학술연구발표회 논문개요집 Vol.- No.-

Electrically driven subwavelength optical nanocircuits

Huang, Kevin C. Y.,Seo, Min-Kyo,Sarmiento, Tomas,Huo, Yijie,Harris, James S.,Brongersma, Mark L. Springer Science and Business Media LLC 2014 Nature photonics Vol.8 No.3