국산 Lidocaine 알칼리화를 위한 Bicarbonate 혼합시 침전유발 최소량에 대한 고찰

이선호,김현수,곽인숙,안원식,최관호,김광민,손민제 대한마취과학회 2000 Korean Journal of Anesthesiology Vol.39 No.5

Background : When local anesthetics for regional anesthesia is used, usually small amounts of bicar-bonate are added for rapid onset. This addition gives the mixed solution a more alkaline pH. The following result is an increased unionized form of the local anesthetic and rapid penetration of the drug into tiissue. Unfortunately, no data about adequate mixing volumes of domestic lidocaine and bicarbonate is available. Methods : We examined six mixing pairs of two kinds of 2% lidocaines and three kinds of 8.4% bicarbonates for minimum volumes of bicarbonate to cause a precipitation of 2% 20 ml lidocaine. Results : The mean volumes of bicarbonate to cause precipitation were 1.54 ml for Kwang-Myung lidocaine with Kwang-Myung bicarbonate, 2.90 ml for Kwang-Myung lidocaine with Dae-Won bicarbonate, 2.73 ml for Kwang-Myung lidocaine with Je-Il bicarbonate, 0.97 ml for Je-Il lidocaine with Kwang-Myung bicarbonate, 1.26ml for Je-Il lidocaine with Dae-Won bicarbonate and 1.39 ml for Je-Il lidocaine with Je-Il bicarbonate. Conclusions : We conclude that the Kwang-Myung lidocaine and the Je-Il lidocaine could cause precipitation when mixing with a smaller bicarbonate volume than foreign textbook recommended. (Korean J Anesthesiol 2000; 39: 726-729)

광주, 전남지역의 의료시설 재편 및 그 실행방안에 관한 연구

최광석 한국의료복지시설학회 2005 의료·복지 건축 Vol.11 No.1

This study is a second paper of the re-structuring strategies of healthcare facilities in Kwang-ju and Jeon-nam province for it's competition power in the emerging global health care market. Kwang-Ju city and Jeon-nam province have had difficulties in building a balanced healthcare system because of rapidly declining population, weakened healthcare infra-structure and geographical problems of healthcare supply by numerous islands. This paper presents the new approaching process for re-building healthcare network in the regional healthcare facilities planning. In addition, it analyzes health planning index, healthcare system, the concept of health care networking, etc. Finally, this presents the case study of regional healthcare facilities planning in Kwang-ju city and Jeon-nam Prtvince.

의료복지 분야의 국가경쟁력 강화를 위한 의료시설재편 및 그 실행방안에 관한 전략적 연구 : 광주, 전남지역의 의료현황과 문제점을 중심으로

최광석 한국의료복지시설학회 2004 의료·복지 건축 Vol.10 No.2

This study aims to present the re-structuring strategies of healthcare facilities in Kwang-ju and Jon-nam province for it's competition power in the emerging global health care market. Kwang-Ju city and Jon-nam province have had difficulties in building a balanced healthcare system because of rapidly declining population, weakened healthcare intra-structure and geographical problems of healthcare supply by numerous islands. Now, Kwang-Ju city and Jon-nam province try to be a core place of economy and culture in the west-south asia. To do so, it is fundamentally necessary to reform their current social structure including healthcare system in large scale. This Study presents the current conditions and the problems of healthcare environment in these areas.

지반-구조물 상호작용에서의 JOINT 요소에 대한 연구

최광순,손영호,김종주,최광규 동아대학교 건설기술연구소 1999 硏究報告 Vol.22 No.2

The direct boundary element method has been formulated In which the symmetry condition is introduced. The displacement approach of the finite element method has been reviewed where the joint stiffness formulation is included. The coupling of boundary and finite element methods is derived for both equivalent boundary and finite element approaches. A computer program based on the coupling of boundary and finite element methods was developed to analyze the elastic behavior of a structure. Another computer program based on the finite element method alone was developed to solve the same soil mass which were assumed to be linearly elastic, isotropic, and homogeneous. The characteristics of joint elements are that they will separate in response to tension, slide in response to shear, and transmit any force in response to compression. The limitation of no transfer of tensile stresses across soil/structure interface was ensured by employing iterative schemes on joint elements. The iterative solution to simulate real properties of joint elements is based on the so called "load transfer method" An example problem of soil-structure interaction problem has been analyzed using the two numerical methods indicated above. Comparison of the results of nodal displacements obtained from both techniques and the software CRISP demonstrates the accuracy and validity of the coupling of boundary and finite element methods. Due to the fact that the dimensionality of the boundary element region is reduced, the equations generated by the coupling of boundary and finite element methods are fewer than the equations generated by the finite element method alone in acquiring the same acruracy. Therefore, the coupling of boundary and finite element methods is more efficient than the finite element method alone in solving a complex soil-structure interaction problem.

복합레진 적층계면에서 oxygen inhibition의 영향에 관한 연구

최수미,박재홍,최성철,김광철,최영철 大韓小兒齒科學會 2010 大韓小兒齒科學會誌 Vol.37 No.3

The purpose of this study was to assess the effect on oxygen inhibition layer(OIL) for the interfacial bonding between resin composite layers, including shear bond strength, fracture modes and degree of conversion. The first layer of specimen was filled with Z-250(shade A3) and was cured for 40s. The second layer of specimen was filled with same composite(shade A1) and was cured for 40s. The first layer of specimens for each group were prepared by methods as followings. Control(curing in atmospheric air), Group1(curing against Mylar strip), Group2(scrubbed with a acetonesoaked cotton), Group3(using Tescera light cup), Group4(using Tescera heat cup), Group5(stored in disti1led water for 30days at 37℃), Group6 (using bonding agent). The results were as follows: 1. There was no statistically significant different shear bond strength between control and group 1(p>0.05). 2. Group 2 showed significantly lower shear bond strength than control and group 1(p<0.05). 3. The observation of the fracture surface leads to the evidence that a major difference occurs in the case of control, group1 and group 3 samples which break mainly cohesively while the other groups break in majority adhesively. 4. The results of FTIR showed that the degree of conversion was the highest in group 2 and the lowest in control group(p<0.05). It can be concluded that an OIL is not necessary for bonding with composite resin. But if a reduced critical amount of the unreacted monomer is present, it was detrimental to bonding additional layers of composite. Further study, such as the quantitative analysis of the unreacted monomer are required. 복합레진의 적층계면에서 산소억제층(oxygen inhibition layer:이하 OIL)의 영향을 연구하기 위해, 아크릴릭 몰드(하층)에 복합레진의 shade A3를 충전한 후 표면의 조건을 달리하여 중합하였으며 상층은 shade A1으로 충전하고 중합하였다. 대조군(OIL 존재), 1군(OIL 형성억제), 2군(OIL 형성억제+레진표면의 미반응 모노머 제거), 3군(가압하에 중합), 4군(열중합), 5군(시효처리), 6군(시효처리+본딩제 도포)로 하층의 계면조건을 다르게 하였다. 전단결합강도와 파절양상, 전환률을 분석하여 다음의 결과를 얻었다. 1. 전단결합강도 측정 결과 대조군과 제 1군 사이에 통계학적으로 유의한 차이가 없었다(p>0.05). 2. 제 2군은 대조군과 1군에 비해 낮은 결합강도를 보였다(p<0.05). 3. 제 3군은 가장 높은 결합강도를 보인 반면, 4군은 가장 낮은 결합강도를 보였다. 4. 6군은 5군보다 두 배 정도 높은 결합강도를 보였다. 5. 대조군과 1군 및 3군에서는 주로 응집성 복합레진파절이 일어난 반면 2군, 4군, 5군과 6군에서는 주로 접착성 계면파절이 일어났다. 6. FTIR로 전환률을 측정한 결과 2군에서는 50.55%로 가장 높았고, 대조군에서는 가장 낮았다(p<0.05). 전단결합강도와 전환률의 결과로 보아, OIL은 복합레진 계면의 결합에 필수적인 요인은 아니며, 표층의 미반응 모노머가 결합강도에 영향을 미치는 것으로 보인다. 향후 계면 결합강도에 영향을 미칠 수 있는 미반응 모노머의 정량적인 분석을 통한 추가적인 연구가 필요할 것으로 생각된다.

Current Status of the Manila Clam (Ruditapes philippinarum) Aquaculture and Perkinsus Disease in Korea

Choi, Kwang-Sik 영남대학교 해양과학연구소 2000 국제심포지움 일정 및 발표논문집 Vol.2000 No.1

The Manila clam (=short neck clam) Ruditapes philippinarum is one of the most important marine shellfish resources supporting Korean fisheries industry. Perkinsus sp, a protozoan parasite new to Korean water is considered to be one of the agent responsible for the recent decline in clam landing observed in Korea. The present study reports life cycle, diagnostic methods and temporal distribution of Perkinsus sp. in Korean water. Ray's RFTM and Choi's NaOH techniques were successfully applied in the examination of Perkinsus infection among the clams. Two to three days after incubation in FTM, hypnospores were enlarged up to 70㎛ and stained as dark blue in Rugol's iodine. Hypnospores incubated in aerated seawater discharged biflagellate zoospores two to three days after incubation at 25℃ Microscopic feature of trophozoites, and zoospores indicated that, Perkinsus sp found in Korea is very closely related to Perkinsus atlanticus found in the Mediterranean Sea. Infection intensity and prevalence of clams collected from twenty-two sampling sites along the west, south and east coasted revealed that almost all clams in the west and south coast infected with Perkinsus sp. while none of the clams in the east infected. It was believed that food level, temperature and salinity were deeply involved in spatial distribution of infection intensity and prevalence of Perkinsus sp.

Microwave Absorption Characteristics of U-Type Ferrite Powders According to Substitution Elements and Its Compositions

Kwang‑Pil Jeong,Su‑Won Yang,Jin‑Hyuk Choi,Jeong‑Gon Kim 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.8

In this study, partially substituted U-type ferrite (Ba4MexCo2-xFe36O60, Me: Mn, Ni, Zn, x=0.5 and 1.0) powders weresynthesized by sol–gel method. The powders were analyzed for phase formation, morphology and magnetic properties byXRD, FE-SEM and VSM respectively. The synthesized ferrite powders were pressed into a series of toroidal shaped samples,in which the weight ratio of parafn to powder was 1:5. The complex scattering parameters were measured by using vectornetwork analyzer in the frequency range of 2–18 GHz and were employed in the calculation of refection loss with variousthicknesses. The minimum refection loss was observed in the substituted nickel sample as−24.4 dB (absorption rate 99.6%)with a thickness of 2.5 mm and the bandwidth was achieved 4.8 GHz (from 7.5 to 12.3 GHz) for refection loss≤ −10 dBin the substituted zinc sample.

Arch교의 橫桁連結部 局部應力과 疲勞擧動에 관한 硏究

최광순,조호근,손영호,최광규 동아대학교 건설기술연구소 1997 硏究報告 Vol.21 No.2

In this paper, the relation between the local stress and the fatigue behavior at gusset plate connected with main girder and floor beam in arch bridges was obtained. The conclusion was as follows : (1) In-plane bending moment and out-of-plane bending moment are higher than other internal stress resultants. (2) When a vehicle crosses the bridges, the change of out-of-plane bending moment corresponds with the change of relative difference in displacement in the longitudinal direction between the tie-girder and stringer. (3) The change of in-plane bending moment corresponds with the change of the displacement in the transverse direction of arch-rib. (4) Fatigue crack can be initiated by in-plane bending stress that Is produced by out-of-plane bending moment at the toe of gusset plate. (5) Fatigue crack can be initiated by tension stress that is produced by in-plane bending moment at the toe of gusset plate.

Arch교의 橫桁連結部 局部應力과 疲勞擧動에 관한 硏究

최광순,조호근,손영호,최광규 東亞大學校 建設技術硏究所 1997 硏究論文集 Vol.21 No.2

In this paper, the relation between the local stress and the fatigue behavior at gusset plate connected with main girder and floor beam in arch bridges was obtained. The conclusion was as follows : (1) In-plane bending moment and out-of-plane bending moment are higher than other internal stress resultants. (2) When a vehicle crosses the bridges, the change of out-of-plane bending moment corresponds with the change of relative difference in displacement in the longitudinal direction between the tie-girder and stringer. (3) The change of in-plane bending moment corresponds with the change of the displacement in the transverse direction of arch-rib. (4) Fatigue crack can be initiated by in-plane bending stress that is produced by out-of-plane bending moment at the toe of gusset plate. (5) Fatigue crack can be initiated by tension stress that is produced by in-plane bending moment at the toe of gusset plate.

열처리 및 보상이온의 주입에 의한 α-수정내의 S₁,S₁',S₁˝ 공명중심들의 변화

송광섭,최재현,최 덕,최옥천,이재훈 명지대학교 자연과학연구소 1995 자연과학논문집 Vol.12 No.-

수정시편을 300℃, 400℃,500℃,530℃에서 각각 20시간씩 열처리한 후에 X밴드 전자 공명장치를 사용하여 α-수정내의 S?(1).S?',S?'' 세 공명중심들에 대한 열처리 조건에 따른 공명 신호들의 세기의 변화를 상온에서 조사하였다.열처리 효과로 S?'과 S?'' 공명중심들이 일부 S?(1)으로 전환되었다. 480℃에서 수정시편의 c축 방향으로 15ooV/cm의 전기장을 가하여 시편내에서 +1가의 보상이온들을 빼내거나, 500V/cm 와 1000V/cm의 전기장으로 Li+ 이온과 Na+이온을 각각 주입시킨 후에 공명신호들의 세기를 서로 비교하였다.한편 시편내에서 보상이온들을 빼내지 않고 400℃에서 20V/cm 와 50 V/cm의 약한 전기장으로La+이온을 주입시킨 경우와 200V/cm의 전기장으로 Na+이온을 주입시킨후에 공명신호들의 세기가 변화하는 모습을 조사하였다.Li+ 이온이 시편에 주입됨에 따라 세 공명중심들 모두 공명신호들의 세기가 증가하였으며, Na+이온이 주입된 경우에는 공명신호를의 세기가 크게 감소하였다. 열처리 효과와 전기장 처리의 결과로부터 세 공명중심들 모두 Li+이온에 의하여 전하가 보상되는 것으로 판명되었다. After heating a quartz sample for 20 hours at 300℃, 400℃, 500℃, and 530℃, respectively, the changes of resonances signal intensities of the centers S?(1), S?', and S?''in α-quartz according to the conditions of heat treatments were investigated at room temperature by employing an X-band electron spin resonance spectrometer. The centers S?' and S1'' were partly converted into S?(1) by the effect of heat treatments. After extracting positively monovalent ions from quartz samples by applying an electric field of 1500V/cm along the crystal c-axis at 480℃ and after electrodiffusing Li+ ions and Na+ ions into the samples with applied electric fields of 500 and 1000 V/cm, respectively, the intensities of resonance spectra were compared with each other. On the other hand a quartz sample was electrodiffused with Li+ ions at 400℃ with weak electric fields of 20 and 50V/cm and then implanted with Na+ions with an electric field of 200V/cm.As Li+ ions diffused into the sample, the intensities of all the three centers increased. But in the case of electrodiffusion with Na+ ions the resonance signals decreased by considerable. From the effect of heat treatment and the result of electrodiffusions it is proved that all the three centers are compensated by the Li+ion.