Physical Inactivity, Sedentary Behavior and Chronic Diseases

Karimé González,Jorge Fuentes,José Luis Márquez 대한가정의학회 2017 Korean Journal of Family Medicine Vol.38 No.3

New research into physical activity suggests that it is no longer sufficient just to meet minimum levels recommend-ed by health guidelines in order to reduce cardiovascular risk. Both physical inactivity and sedentary behavior have their own health hazards and need to be addressed separately, in order to explore their different deleterious mech-anisms. The aim of this review was to define and to characterize both concepts, and their relationship with major non-communicable chronic diseases. A PubMed database search was undertaken, using the following key words: physical activity, physical inactivity, sedentarism, sedentary behavior, and non-communicable chronic disease. This literature review provides an updated view on physical inactivity and sedentary behavior, and reevaluates their prevalence and association with major non-communicable chronic disease.

Amplified Pixel Architectures in Amorphous Silicon Technology for Large Area Digital Imaging Applications

Karim S. Karim,F. Taghibakhsh,G. Sanaie-Fard Sanaie-Fard,M. H. Izadi,T. Ottaviani 한국물리학회 2006 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.48 No.I

On-pixel amplifiers in amorphous silicon (a-Si) technology can offer increased pixel signal-to-noise ratios (SNR) compared to traditional switch based imaging pixels. Experiments reveal a reduction in readout noise and indicate that a-Si pixel amplifiers can meet the stringent requirements for digital X-ray fluoroscopy. However, larger input voltages can introduce non-linearities thereby reducing the pixel dynamic range. In this research, we investigate amplified pixel architectures that exhibit large signal linearity and consequently higher dynamic range. Gain, linearity, noise, metastability and area estimations of the amplified pixels indicate their applicability in large-area medical Xray imaging applications that require switching between low-exposure, real-time fluoroscopy and high-exposure chest radiography modes at a region of interest.

Effect of Pollination Technique on Agronomic and Physicochemical Characteristics of Date Palm Fruits (Phoenix dactylifera L.) cv. ‘Deglet Nour ’

Kadri Karim,Aounallah Karim,Hammadi Hamza,Abdelhafidh Manar,Chahine Karmous,Taoufik Bettaieb 한국원예학회 2022 원예과학기술지 Vol.40 No.2

Analysis of Marginal Count Failure Data by using Covariates

Karim, Md.Rezaul,Suzuki, Kazuyuki The Korean Reliability Society 2003 International Journal of Reliability and Applicati Vol.4 No.2

Manufacturers collect and analyze field reliability data to enhance the quality and reliability of their products and to improve customer satisfaction. To reduce the data collecting and maintenance costs, the amount of data maintained for evaluating product quality and reliability should be minimized. With this in mind, some industrial companies assemble warranty databases by gathering data from different sources for a particular time period. This “marginal count failure data” does not provide (i) the number of failures by when the product entered service, (ii) the number of failures by product age, or (iii) information about the effects of the operating season or environment. This article describes a method for estimating age-based claim rates from marginal count failure data. It uses covariates to identify variations in claims relative to variables such as manufacturing characteristics, time of manufacture, operating season or environment. A Poisson model is presented, and the method is illustrated using warranty claims data for two electrical products.

Effect of Top Sheet Materials on Joint Performance of Self-Piercing Riveting

Karim Md Abdul,Murugan Sivaprasad,배기만,백종진,지창욱,노우람,이한주,Jang Will,김덕봉,박영도 대한용접접합학회 2022 대한용접·접합학회지 Vol.40 No.6

Three types of self-piercing riveting (SPR) joints, i.e., steel/aluminum, carbon fiber reinforced polymer (CFRP)/ aluminum, and aluminum/aluminum, were constructed using three different top sheet materials with the same alumi- num alloy as the bottom sheet. The effects of the top sheet material on the joint quality and mechanical behavior were evaluated. The top sheet materials’ characteristics dominate the rivet piercing process and the consequent inter- lock distance. The high-strength steel top sheet requires a comparatively higher rivet setting force and induces early flaring of the rivet tail, resulting in a larger interlock distance. Though the CFRP needs the highest rivet setting force to penetrate the rivet through the CFRP fibers, the CFRP/aluminum joint exhibits the smallest interlock distance be- cause of the SPR process-induced damages to the CFRP and subsequently less flaring of the rivet tail. In strength tests, the damaged CFRP sheet resulted in rivet head pullout of the CFRP/aluminum joints, which exhibited the low- est lap-shear and cross-tension strengths. In contrast, the steel/aluminum joints demonstrated the highest strengths because of their comparatively larger interlock distances. In addition to the experimental analysis, simulations re- vealed the rivet penetration and flaring mechanisms with various top sheet materials, and their respective joint qual- ity and strengths.

An Efficient Approach to Mining Maximal Contiguous Frequent Patterns from Large DNA Sequence Databases

Karim, Md. Rezaul,Rashid, Md. Mamunur,Jeong, Byeong-Soo,Choi, Ho-Jin Korea Genome Organization 2012 Genomics & informatics Vol.10 No.1

Mining interesting patterns from DNA sequences is one of the most challenging tasks in bioinformatics and computational biology. Maximal contiguous frequent patterns are preferable for expressing the function and structure of DNA sequences and hence can capture the common data characteristics among related sequences. Biologists are interested in finding frequent orderly arrangements of motifs that are responsible for similar expression of a group of genes. In order to reduce mining time and complexity, however, most existing sequence mining algorithms either focus on finding short DNA sequences or require explicit specification of sequence lengths in advance. The challenge is to find longer sequences without specifying sequence lengths in advance. In this paper, we propose an efficient approach to mining maximal contiguous frequent patterns from large DNA sequence datasets. The experimental results show that our proposed approach is memory-efficient and mines maximal contiguous frequent patterns within a reasonable time.

Salinity Tolerance of Blackgram and Mungbean: II. Mineral Ions Accumulation in Different Plant Parts

Karim, M.A.,Raptan, P.K.,Hamid, A.,Khaliq, Q.A.,Solaiman, A.R.M.,Ahmed, J.U. The Korean Society of Crop Science 2001 Korean journal of crop science Vol.46 No.5

Blackgram (Vigna mungo) is more salt tolerant than mungbean (Vigna radiata). This study was initiated to know whether the accumulation pattern of mineral ions in different plant parts plays a significant role in the differences in salt tolerance between the two Vigna species. Different mineral ions, viz. N, Cl, Na, K, Mg and Ca in different organs of two varieties of each of blackgram- Barimash-l (susceptible one) and Barimash-2 (tolerant one), and mungbean-Barimung-3 (tolerant one) and Barimung-4(susceptible one), were analyzed after growing with 0, 50, 75 and 100 mM NaCl solutions. The two crops showed a decreased but similar pattern of total N accumulation under saline conditions. The tolerant variety of both the crops showed a less reduction in total N than the susceptible one. Leaves showed the maximum while stem the minimum N, irrespective of levels of salinity. C $l^{[-10]}$ and N $a^{+}$ accumulation increased with the increasing salinity levels. Interestingly, similar to a halophyte, the salt tolerant blackgram exhibited conspicuously higher amount of N $a^{+}$ in the shoot than the salt-susceptible mungbean. However, the tolerant varieties showed less amount of N $a^{+}$ than the susceptible one, especially in blackgram. Seeds of both Vigna spp. accumulated the minimum amount of N $a^{+}$ than other plant parts. $K^{+}$ accumulation decreased by salinity in most of the plant parts, except seeds. Blackgram showed larger reduction in K than mungbean. The $Mg^{++}$ increased in leaves, petioles and stem by salinity while decreased in the roots, podshells and seeds in both the crops. Salinity increased $Ca^{++}$ accumulation in all plant-parts except roots of both Vigna spp. Apparently, the leaves of mungbean accumulated higher concentration of $Ca^{++}$ than blackgram. Varietal differences in the accumulation pattern of $K^{+}$, $Mg^{++}$ and $Ca^{++}$ were not clear. It was concluded that blackgram, presumably, possesses a similar salt tolerance mechanism to halophyte, and the pattern of accumulation of mineral ions in blackgram and mungbean was not fully ascribed to the differences in salinity tolerance between the two Vigna species.gna species.ies.s.ies.

Centralized versus Market-based Workflow Coordination in the Presence of Uncertainty

Karim Al-Yafi,Habin Lee 제어로봇시스템학회 2010 제어로봇시스템학회 국제학술대회 논문집 Vol.2010 No.10

While centralised approach has been considered to provide superior performance workflow coordination than market-based approach, most of the extant comparisons have been performed on the assumption that the working environments are static. This paper aims to compare the performance of the two approaches in task allocations of mobile business processes which are characterized with high level of exceptions like traffic congestions, accidents in the middle of task execution, occurrence of higher priority tasks, and so on. A multi-agent based simulation is adopted to represent two identical working environments in which mobile workers are allocated with geographically distributed tasks. In the simulation, the performance of the two approaches is compared in consideration of their ability of exception handling. The results show that the information update frequency and the type of exceptions affect the performance of centralized approach.

Epidemiology and Clinical Burden of Malaria in the War-Torn Area, Orakzai Agency in Pakistan

Karim, Asad Mustafa,Hussain, Irfan,Malik, Sumera Kausar,Lee, Jung Hun,Cho, Ill Hwan,Kim, Young Bae,Lee, Sang Hee Public Library of Science 2016 PLoS neglected tropical diseases Vol.10 No.1

<▼1><P><B>Background</B></P><P>Military conflict has been a major challenge in the detection and control of emerging infectious diseases such as malaria. It poses issues associated with enhancing emergence and transmission of infectious diseases by destroying infrastructure and collapsing healthcare systems. The Orakzai agency in Pakistan has witnessed a series of intense violence and destruction. Military conflicts and instability in Afghanistan have resulted in the migration of refugees into the area and possible introduction of many infectious disease epidemics. Due to the ongoing violence and Talibanization, it has been a challenge to conduct an epidemiological study.</P><P><B>Methodology/Principal Findings</B></P><P>All patients were sampled within the transmission season. After a detailed clinical investigation of patients, data were recorded. Baseline venous blood samples were taken for microscopy and nested polymerase chain reaction (nPCR) analysis. <I>Plasmodium</I> species were detected using nested PCR (nPCR) and amplification of the small subunit ribosomal ribonucleic acid (ssrRNA) genes using the primer pairs. We report a clinical assessment of the epidemic situation of malaria caused by <I>Plasmodium vivax</I> (86.5%) and <I>Plasmodium falciparum</I> (11.79%) infections with analysis of complications in patients such as decompensated shock (41%), anemia (8.98%), hypoglycaemia (7.3%), multiple convulsions (6.7%), hyperpyrexia (6.17%), jaundice (5%), and hyperparasitaemia (4.49%).</P><P><B>Conclusions/Significance</B></P><P>This overlooked distribution of <I>P</I>. <I>vivax</I> should be considered by malaria control strategy makers in the world and by the Government of Pakistan. In our study, children were the most susceptible population to malaria infection while they were the least expected to use satisfactory prevention strategies in such a war-torn deprived region. Local health authorities should initiate malaria awareness programs in schools and malaria-related education should be further promoted at the local level reaching out to both children and parents.</P></▼1><▼2><P><B>Author Summary</B></P><P>The malaria epidemic and endemic in Pakistan is a present and ongoing threat to public health which could have an impact in the nearby regions as well. For the first time, we report a clinical assessment of malaria endemicity in the Orakzai Agency, which is Pakistan’s most neglected area due to Talibanization and war in Afghanistan. Febrile patient blood samples of the area were investigated to report the clinical assessment of malaria caused by <I>Plasmodium vivax</I> and <I>P</I>. <I>falciparum</I> infections. The nested polymerase chain reaction (nPCR) examination detected 154 (86%) and 21 (12%) <I>P</I>. <I>vivax</I> and <I>P</I>. <I>falciparum</I> infections, respectively. We found worsening hygiene conditions in FATA, likely caused by poor socioeconomics and the collapse of the public health infrastructure. Decompensated shock was a common and prominent clinical feature of malaria among all the clinical presentations caused by both <I>P</I>. <I>vivax</I> (53%) and <I>P</I>. <I>falciparum</I> (42.9%). Our results have significant implications for both public health and malaria control in FATA and Pakistan. Our findings illustrate higher prevalence of malaria in children compared to other age groups. Further research on sensible estimates of refugees is required, as well as resistance to anti-malarials.</P></▼2>

Mobile shopping intentions: Do trustworthiness and culture Matter?

Karim GARROUCH,ElHabib TIMOULALI 한국유통과학회 2020 유통과학연구 Vol.18 No.11

Purpose: This research aims to verify the role of mobile shopping attributes, trustworthiness, and cultural dimensions on mobile shopping intentions in Saudi Arabia. The originality of the model stems from the verification of the moderating impact of cultural variables, namely collectivism and masculinity, and from the integration of trustworthiness as a variable depending on mobile shopping attributes. Research design, data and methodology: A survey was distributed to 233 consumers with different nationalities living in the Kingdom of Saudi Arabia. Structural equation modeling and multi-group analysis were carried out to verify the conceptual model and the moderating variables. Results: The findings support the influence of several innovation attributes, namely complexity and trialability on behavioral intentions, while relative advantage has a direct impact on trustworthiness. A few paths are moderated by masculinity and collectivism. Conclusions: Culture and mobile commerce attributes need to be thought out by managers as factors influencing mobile commerce segmentation for expatriates and locals. Trustworthiness is also a key factor of mobile shopping adoption. Limitations and future research ideas are presented to enrich the proposed model and improve its predictive validity.