Experimental Study of the Runaway Current in the J-TEXT Tokamak

Y. H. Luo,Z. Y. Chen,X. Q. Zhang,D. W. Huang,W. Jin,Y. H. Huang,Y. Tang,J. C. Li,R. H. Tong,W. Yan,G. Zhuang 한국물리학회 2014 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.64 No.3

Major plasma disruptions in tokamaks often generate runaway currents, which contain electronswith energies of several tens of megaelectron-volts (MeV). These currents can cause substantialdamage when control is lost and the current hits the limiters or the vessel wall. The interactionbetween the runaway electrons and the impurities inside the plasma results in soft X-ray emission,which can provide detailed information about the runaway generation process and the confinementof runaway electrons. A vertical soft X-ray array at the top of Joint Texas Experimental Tokamak(J-TEXT) was used to study the runaway beams resulting from major disruptions. Runawayelectron production and confinement of runaway current were observed by using soft X-ray images.

Numerical studies of steel-concrete-steel sandwich walls with J-hook connectors subjected to axial loads

Zhenyu Huang,J.Y. Richard Liew 국제구조공학회 2016 Steel and Composite Structures, An International J Vol.21 No.3

Steel-concrete-steel (SCS) sandwich composite wall has been proposed for building and offshore constructions. An ultra-lightweight cement composite with density1380 kg/m³ and compressive strength up to 60 MPa is used as core material and inter-locking J-hook connectors are welded on the steel face plates to achieve the composite action. This paper presents the numerical models using nonlinear finite element analysis to investigate the load displacement behavior of SCS sandwich walls subjected to axial compression. The results obtained from finite element analysis are verified against the test results to establish its accuracy in predicting load-displacement curves, maximum resistance and failure modes of the sandwich walls. The studies show that the inter-locking J-hook connectors are subjected to tension force due to the lateral expansion of cement composite core under compression. This signifies the important role of the interlocking effect of J-hook connectors in preventing tensile separation of the steel face plates so that the local buckling of steel face plates is prevented.

Response of plasma rotation to resonant magnetic perturbations in J-TEXT tokamak

Yan, W,Chen, Z Y,Huang, D W,Hu, Q M,Shi, Y J,Ding, Y H,Cheng, Z F,Yang, Z J,Pan, X M,Lee, S G,Tong, R H,Wei, Y N,Dong, Y B IOP 2018 Plasma physics and controlled fusion Vol.60 No.3

<P>The response of plasma toroidal rotation to the external resonant magnetic perturbations (RMP) has been investigated in Joint Texas Experimental Tokamak (J-TEXT) ohmic heating plasmas. For the J-TEXT’s plasmas without the application of RMP, the core toroidal rotation is in the counter-current direction while the edge rotation is near zero or slightly in the co-current direction. Both static RMP experiments and rotating RMP experiments have been applied to investigate the plasma toroidal rotation. The core toroidal rotation decreases to lower level with static RMP. At the same time, the edge rotation can spin to more than 20 km s<SUP>−1</SUP> in co-current direction. On the other hand, the core plasma rotation can be slowed down or be accelerated with the rotating RMP. When the rotating RMP frequency is higher than mode frequency, the plasma rotation can be accelerated to the rotating RMP frequency. The plasma confinement is improved with high frequency rotating RMP. The plasma rotation is decelerated to the rotating RMP frequency when the rotating RMP frequency is lower than the mode frequency. The plasma confinement also degrades with low frequency rotating RMP.</P>

Upgraded high time-resolved x-ray imaging crystal spectroscopy system for J-TEXT ohmic plasmas (4 pages)

Jin, W.,Chen, Z.Y.,Huang, D.W.,Li, Q.L.,Yan, W.,Luo, Y.H.,Lee, S.G.,Shi, Y.J.,Huang, Y.H.,Tong, R.H. AMERICAN INSTITUTE OF PHYSICS 2014 Review of scientific instruments Vol.85 No.2

DISCOVERY OF X-RAY PULSATION FROM THE GEMINGA-LIKE PULSAR PSR J2021+4026

Lin, L. C. C.,Hui, C. Y.,Hu, C. P.,Wu, J. H. K.,Huang, R. H. H.,Trepl, L.,Takata, J.,Seo, K. A.,Wang, Y.,Chou, Y.,Cheng, K. S. IOP Publishing 2013 ASTROPHYSICAL JOURNAL LETTERS - Vol.770 No.1

<P>We report the discovery of an X-ray periodicity of similar to 265.3 ms from a deep XMM-Newton observation of the radio-quiet gamma-ray pulsar, PSR J2021+4026, located at the edge of the supernova remnant G78.2+2.1 (gamma-Cygni). The detected frequency is consistent with the gamma-ray pulsation determined by the observation of the Fermi Gamma-ray Space Telescope at the same epoch. The X-ray pulse profile resembles the modulation of a hot spot on the surface of the neutron star. The phase-averaged spectral analysis also suggests that the majority of the observed X-rays have thermal origins. This is the third member in the class of radio-quiet pulsars with significant pulsations detected from both X-ray and gamma-ray regimes.</P>

Steel-Concrete-Steel Sandwich Composite Structures Subjected to Extreme Loads

Zhenyu Huang,J Y Richard Liew 한국강구조학회 2016 International Journal of Steel Structures Vol.16 No.4

This paper summarizes the latest research and development work on steel-concrete-steel (SCS) sandwich composite structures for the use as Arctic offshore platform, and to resist impact and blast loads. Current development of ultra-lightweight cement composite (ULCC) and a floatable structural cement composite (FSCC) to be used as infilled materials for SCS sandwich structure are presented. This paper aims to advance the application of SCS sandwich composite with the use of steel plate and lightweight concrete materials. A series of tests on lightweight SCS sandwich panels with shear connectors has been carried out. The superior performance of SCS sandwich panel is demonstrated. The results show that SCS sandwich with novel J-hook connectors is effective in preventing plate separation from concrete core, maintaining the structural integrity.

산란계 사료내 Conjugated Linoleic Acid(CLA)와 불포화지방산 함유 Oil의 첨가가 산란율과 계란의 품질에 미치는 영향

김효진(H. J. Kim),유종상(J. S. Yoo),신승오(S. O. Shin),조진호(J. H. Cho),진영걸(Y. J. Chen),황염(Y. Huang),김영준(Y. J. Kim),황광연(K. Y. Whang),양무성(M. S. Yang),김도중(D. J. Kim),김인호(I. H. Kim) 한국가금학회 2008 韓國家禽學會誌 Vol.35 No.2

차세대 가속기용 공동형 빔위치 측정기 개발

Kim S.H.,Park Y.J.,Hwang W.H.,Huang J.Y.,Honda Y.,Inoue Y. 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.4

국제 직선형 충돌 가속기 (ILC; International Linear Collider). 자유전자 레이저 (FEL: Free Electron Laser)와 같은 차세대 가속기에 사용 할 공동형 빔위치 측정기 ( 공동형 BPM: cavity-type beam position monitor)를 일본 고에너지 연구소 (KEK; High Energy Accelerator Research Organization)와 공동으로 개발하였다. ILC 및 FEL의 운전을 위해서는 빔 기반 정렬 (beam-based alignment)과 되먹임 장치 (feedback system)가 필수적으로 요구되는데, 이를 위해서는 적절한 위치에 서브마이크론의 분해능을 지닌 빔위치 측정기를 설치하여야 한다 [1]. 공동형 BPM은 기계적인 정밀도에 매우 민감하므로 정밀한 제작과 미세한 기계적 조정을 통하여 성능을 달성하게 된다. 우리는 제작 오차를 줄이기 위하여 공진 공동, 빔 튜브, 도파관, 전기도입기 등 모든 부품을 조립 후 한꺼번에 진공 브레이징 하였다. 공동의 외주면에는 네 개의 튜닝 핀을 두어 공진주파수 및 x-y 격리도 (x-y isolation between coupled waveguide)를 미세 조정할 수 있도록 하였다. 현재 개발된 공동형 BPM 은 공진주파수는 6.422 GHz 이며, 공동 내경은 53.822 mm, 빔의 위치 측정 범위는 ${\pm}250 {\mu}m$이다. network analyzer를 관측하면서 튜닝핀을 이용하여 x-y 격리도를 -40 dB 이하로 조정할 수 있었다. 실제 KEK ATF2에서의 전자빔을 이용한 시험에서 신호의 모양, x-y 격리도, 민감도 등에서 만족한 결과를 얻었다. Cavity-type beam position monitors were developed in collaboration with KEK to use for the future accelerators such as international linear collider (ILC) or x-ray free electron laser (XFEL) in PAL. BPM components such as BPM cavity, beam tubes, waveguides and feedthroughs were assembled by brazing at the same time to reduce mechanical errors during the fabrication. There are four screwed pins around outer rim of the cavity for the tuning of cavity frequency and x-y isolation. The resonance frequency of BPM is 6.422 GHz, the inner diameter of cavity is 53.822 mm, and the range of mechanical adjusting is $+ / - 250{\mu}m$. The x-y isolation was measured better than -40 dB after tuned. Test results of signal forms, x-y isolations, sensitivities are satisfied within requirements for the KEK ATF2 beam line.

Dietary Requirement of True Digestible Phosphorus and Total Calcium for Growing Pigs

Ruan, Z.,Zhang, Y.-G.,Yin, Y.-L.,Li, T.-J.,Huang, R.-L.,Kim, S.W.,Wu, G.Y.,Deng, Z.Y. Asian Australasian Association of Animal Productio 2007 Animal Bioscience Vol.20 No.8

Sixty healthy growing pigs ($Duroc{\times}Landrace{\times}Yorkshire$ with an average BW of 21.4 kg) were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. Pigs were assigned randomly to one of five dietary treatments (12 pigs/diet), representing five levels of TDP (0.16%, 0.20%, 0.23%, 0.26% and 0.39%). There were three replications per treatment, with four pigs (2 barrows and 2 gilts) in each replication (2 pigs/pen) A randomized-block design was used, with pen as the experimental unit. Experimental diets were formulated to provide the 5 TDP levels with a total calcium (Ca) to TDP ratio of 2:1, and offered to pigs at 5% BW for 28 d. The total Ca contents of the five diets were 0.33, 0.38, 0.45, 0.51 and 0.79%, respectively. During the 28-d experimental period, the ADG of pigs was affected by dietary TDP levels as described by Equation 1: y = $-809,532x^4+788,079x^3-276,250x^2+42,114x-1$,759; ($R^2$ = 0.99; p<0.01; y = ADG, g/d; x = dietary TDP, %). The feed:gain ratio for pigs was affected by dietary TDP levels as described by Equation 2: y = $3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2$ = 0.99; p<0.01; y = feed:gain ratio; x = dietary TDP, %). Total P concentrations in serum were affected by dietary TDP levels as described by Equation 3: y = $-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ ($R^2$ = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest feed:gain ratio (1.07), and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet (e.g., 5.1 g/day for a 30-kg pig that consumed 1.5 kg feed daily) at a total Ca to TDP ratio of 2:1.

True Digestibility of Phosphorus in Different Resources of Feed Ingredients in Growing Pigs

Wu, X.,Ruan, Z.,Zhang, Y.G.,Hou, Y.Q.,Yin, Y.L.,Li, T.J.,Huang, R.L.,Chu, W.Y.,Kong, X.F.,Gao, B.,Chen, L.X. Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.1

To determine the true digestible phosphorus (TDP) requirement of growing pigs, two experiments were designed with the experimental diets containing five true digestible P levels (0.16%, 0.20%, 0.23%, 0.26% and 0.39%) and the ratio of total calcium to true digestible P (TDP) kept at 2:1. In Experiment 1, five barrows (Duroc${\times}$Landrace${\times}$Yorkshire) with an average initial body weight of 27.9 kg were used in a $5{\times}5$ Latin-square design to evaluate the effect of different dietary P levels on the digestibility and output of P and nitrogen. In Experiment 2, sixty healthy growing pigs (Duroc${\times}$Landrace${\times}$Yorkshire) with an average body weight (BW) of 21.4 kg were assigned randomly to one of the five dietary treatments (12 pigs/diet), and were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. The results indicated that the true digestibility of P increased (p<0.05) linearly with increasing dietary TDP level below 0.26%. The true P digestibility was highest (56.6%) when dietary TDP was 0.34%. Expressed as g/kg dry matter intake (DMI), fecal P output increased (p<0.05) linearly with increasing P input. On the basis of g/kg fecal dry matter (DM), fecal P output was lowest for Diet 4 and highest (p<0.05) for Diet 5. The apparent digestibility of crude protein (CP) did not differ (p>0.05) among the five diets, with the average nitrogen output of 12.14 g/d and nitrogen retention of 66% to 74% (p>0.05), which suggested that there was no interaction between dietary P and CP protein levels. During the 28-d experimental period of Experiment 2, the average daily gain (ADG) of pigs was affected by dietary TDP levels as described by Eq. (1): $y=-809,532x^4+788,079x^3-276,250x^2+42,114x-1,759$; ($R^2=0.99$; p<0.01; y = ADG, g/d; x = dietary TDP, %), F/G for pigs by Eq. (2): $y=3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2=0.99$; p<0.01; y = F/G; x = dietary TDP, %), and Total P concentrations in serum by Eq. (3): $y=-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ (R2 = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest F/G (1.07) and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet at a total Ca to TDP ratio of 2:1.