http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Selenium 공급방법이 수경재배 토마토의 생장과 Se 흡수에 미치는 영향
이철규(Cheol-Kyu Lee),조경철(Kyung-Cheol Cho),이정현(Jeong-Hyun Lee),조자용(Ja-Yong Cho),서범석(Beom-Seok Seo),양원모(Won-Mo Yang) (사)한국생물환경조절학회 2005 생물환경조절학회지 Vol.14 No.4
토마토 ‘모모타로’를 공시하여 셀레늄 10㎎ㆍL?¹의 관주 및 엽면시비 등의 단용 및 혼용처리가 수경재배 토마토의 생육 및 과실 내 셀레늄 축적 함량에 미치는 영향을 구명하였다. 토마토 종자를 50공 트레이에 파종하여 70일 동안 육묘한 후 유묘를 코코피트 슬라이브를 이용한 수경재배 시스템에 정식하였다. 양액은 일본원예시험장 배양액 표준처방으로 조성하였으며, pH 5.8~6.2와 EC 2.3 ㎎ㆍL?¹ 등으로 조절하여 공급하였다. 셀레늄은 무기태 SeO₂와 sugar fatty acid ester에 킬레이트화 한 유기태 셀레늄을 10 ㎎ㆍL?¹으로 조성하여 관주, 엽면시비, 관주와 엽면시비를 병행하여 처리하였다. 초장, 엽수, 엽면적 및 엽록소 등의 토마토 생장반응은 셀레늄의 엽면시비, 그리고 엽면시비와 관주를 병행한 처리구에서 현저히 증가하였다. 과실 내 셀레늄 축적 함량은 킬레이트화 한 유기태 셀레늄을 엽면시비와 관주를 병행하여 처리한 경우에 0.302 ㎎ㆍL?¹으로 가장 높았다. 무기태와 유기태 셀레늄의 엽면시비와 관주 등의 단용 처리 보다는 혼용 처리가 전반적인 과실 생장과 체내 셀레늄 축적에 효과적이었다. 무기태 설레늄(SeO₂) 보다는 sugar fatty acid ester에 킬레이트화한 유기태 셀레늄 처리가 셀레늄을 함유한 기능성 토마토의 수경재배에 더 효과적이었다. This study was conducted to clarify the effects of supplying methods of selenium on the growth and Se uptake of hydroponically grown tomato plants. Tomato seeds (Lycopersicum esculentum Mill. cv. Momotaro T-93, Daki Seed Co.) were sown in plug tray with fifty holes, and raised for sixty days. Tomato seedlings transplanted to coco fiber slabs were supplied with the nutrient solutions adjusted to EC 2.3 dSㆍm?¹ and pH 5.8~6.2 recommended by the Japanese Horticultural Experiment Station. Selenium forms used were inorganic SeO₂ (here in after referred to Se) and organic selenium chelated with sugar fatty acid ester (here in after referred to chelated-Se). 10 ppm selenium solutions were treated to tomato plants with foliar applications, drenching, and foliar application plus drenching. Growth characteristics in terms of plant height, number of leaves, leaf area and chlorophyll content were significantly increased in the plot of foliar application of Se, and in the plot of foliar application plus drenching of chelated-Se than other plots, respectively. Transported contents of selenium into the tomato fruits were highest as 0.302 ppm in the plot of foliar application plus drenching of chelated-Se. Also, it had tended to be higher in the plot of foliar application plus drenching than in the plots of foliar application or drenching in both of Se and chelated-Se. Foliar application and drenching of organic chelated-Se were effective to produce the functional tomato fruits.
조현이,정종철,김호성,최재욱,성대경,서지훈,김성범,이계혁 大韓顎顔面成形再建外科學會 2000 Maxillofacial Plastic Reconstructive Surgery Vol.22 No.1
Osteosarcoma is a primary malignant tumor arising most often in the long bone, but rare in jaw bone. Especially osteogenic sarcoma of the mandible is a rare tumor, comprising less than 0.5% of all head and neck tumors. Osteosarcoma occurs cheifly in young persons, and presenting very survival rates. Histopathologically this tumor can be classified three types, osteoblastic, fibroblastic, chondroblastic and classified from low grade to high grade by anaplasia or mitosis of the tumor cells. Sometimes, the exact diagnosis of osteosarcoma is difficult especially in low grade osteosarcoma, even if clinical or radiographical findings suggest to osteosarcoma. So suspcious to malignant bone tumor in clinical or radiological findings, biopsy should be taked from deep portion and multiple area, and sharing the patient history and radiographs with pathologist will assist in the development of the diagnosis. We report a case of low grade osteosarcoma on the mandible initially difficulty in accurate diagnosis. The patient visited our hospital for routine dental treatment but radiographic findings displayed ill-defined radiolucency with osteoid formation on the mandible. Final diagnosis was difficulty in initial biopsy but subsequent biopsy taked from deep portion presented infiltrative growth and mitosis of the tumor cell in some area with small osteoid bone formation, so we could reach final diagnosis as low grade sarcoma. We treated this patient with bloc resection of the mandible and immediate reconstruction with iliac corticocancellous block.
Growth-promoting activity of Hominis Placenta extract on regenerating sciatic nerve1
SEO, Tae-beom,HAN, In-sun,YOON, Jin-hwan,SEOL, In-chan,KIM, Yun-sik,JO, Hyun-kyung,AN, Joung-jo,HONG, Kwon-eui,SEO, Young-bae,KIM, Dong-hee,PARK, Seung-kiel,YANG, Deok-chun,NAMGUNG, Uk Springer Science and Business Media LLC 2006 Acta pharmacologica Sinica. Vol.27 No.1
<P>AIM: Extract of Hominis Placenta (HP) has been used in oriental medicine as an agent for improving physiological function. The present study was conducted to investigate whether HP treatment in an experimental sciatic nerve injury animal model produces growth-promoting effects on regenerating peripheral nerve fibers after injury. METHODS: After HP was injected into a sciatic nerve injury site, changes in protein levels were analyzed in the regenerating nerve area by Western blotting and immunofluorescence staining analyses. For quantitative assessment of axonal regeneration, a retrograde tracing technique was used to identify the neuronal cell bodies corresponding to regenerating axons, and the extent of neurite outgrowth in cultured dorsal root ganglia (DRG) sensory neurons prepared from animals that had experienced a sciatic nerve crush injury 7 d before neuron collection was analyzed. RESULTS: Induction levels of axonal growth-associated protein (GAP-43) in the injured sciatic nerves were elevated by HP treatment. HP treatment also upregulated cell division cycle 2 (Cdc2) protein levels in the distal stump of the injured sciatic nerve. Induced Cdc2 protein was detected in Schwann cells, suggesting that Cdc2 kinase activity may be involved in the growth-promoting activity of regenerating axons via Schwann cell proliferation. Cell body measurement by retrograde tracing indicated that HP treatment produced significant increases in regenerating motor axons. Finally, HP treatment of cultured DRG sensory neurons significantly increased neurite arborization and elongation. CONCLUSION: HP promotes the regeneration of injured sciatic axons by upregulating the synthesis of regeneration-related protein factors such as GAP-43 and Cdc2.</P>
공기식 흡수기의 유동 방향에 따른 5kW_t급 접시형 태양열 집열기의 열성능 분석
서주현(Seo, Joo-Hyun),강경문(Kang, Kyung-Moon),이주한(Lee, Ju-Han),오상준(Oh, Sang-June),서태범(Seo, Tae-Beom) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
The thermal performance of air receiver with a change of flow direction for dish solar collector. This system is installed and operated in Incheon, Korea. The thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. Experiments are being carried out to investigate the thermal performance variation of the receivers with several design parameters such as the shape of the receiver, the flow directions and the flow rate of air. First, air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. Second, air flows into the backside of the receiver, Which is the forward side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 1 exit. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected.
서주현(Seo Joo-Hyun),마대성(Ma Dae-Sung),김용(Kim Yong),서태범(Seo Tae-Beom),한귀영(Han Gui-Young) 한국태양에너지학회 2007 한국태양에너지학회 논문집 Vol.27 No.4
The 5㎾t dish solar collector is designed and the preliminary performance test for this is carried out. The diameter of the parabolic dish is 3.2 m, and its focal length is 2 m. It consists of 10 small reflectors which have their own curvatures, and the effective reflecting area is 5.9 ㎡, and the rim angle of the dish is 43.85°. The reflectivity of reflectors is 0.95, and the thermal capacity of the system is about 5 ㎾ thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 ㎜, and the height is 210 ㎜. A quartz window is installed at the receiver aperture to minimize the convective heat loss and prevent air leakage. In order to increase the heat transfer area, porous materials (nickel-alloy) are inserted into the receiver. Air flows into the upper part of the receiver which is the opposite side of the aperture. After the air flows through the inside of the receiver, that goes out of the receiver through 3 exits which are located near the aperture. The volumetric flow rates of air are varied from 600 to 1200 L/min. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases.