http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
골밀도 변화에 따른 cage와 나사를 이용한 추체간 유합술의 유한요소 해석
김현수,박정호,Kim H. S.,Park J. H. 대한의용생체공학회 2004 의공학회지 Vol.25 No.6
Cage와 나사를 이용하여 유합된 추체의 3차원 유한 요소 모델을 제작하여, 골밀도의 변화에 따른 골다공증과 cage의 위치 변화에 대해, Von-Mites 최대 응력과 최대 변형량을 살펴보았다. 그 결과 해면골의 강도가 증가함에 따라서, 피질골의 응력은 감소하고, 해면골에서의 응력은 증가하였다. 또한 cage의 위치의 변화에 따라서 추체의 응력 분포의 양상이 달라짐을 알 수 있었으며, 이를 통해 수술의 성공도를 높이고자 한다. Three dimensional finite element models of lumbar interbody fusion using rage and screws were constructed for the simulation of stress distribution and maximum displacement. It is also performed to investigate the efforts of osteoporosis and the location of cage on the stress distribution. It is known from the results that the increase of the strength of trabecular bone causes to decrease the stress of cortical bone and to increase the stress of trabecular bone. And it is found that the trend of stress distribution is changed by the change of location of cage and proper location of cage enhances the rate of operational success.
김현수,이의수,박동우,이일민,문기원,최다혜,신준환,김무건,최경선,박경현,Kim, H.S.,Lee, E.S.,Park, D.W.,Lee, I.M.,Moon, K.,Choi, D.H.,Shin, J.H.,Kim, M.G.,Choi, K.S.,Park, K.H. 한국전자통신연구원 2019 전자통신동향분석 Vol.34 No.3
The bandwidth of wireless communication is expected to grow exponentially due to the expansion of mobile devices and the increase of real-time and realistic multimedia services. Recently, the studies on terahertz band wireless communication have been actively conducted for the next generation communication after 5G wireless communication. The terahertz band, which is the unallocated frequency band, has been applied to the non-contact, non-destructive quality inspection industry such as the terahertz imaging and spectral systems through the development of terahertz generating and detecting components. This article briefly describes recent research trends on terahertz wireless communication technologies and introduces the details of photonics-based terahertz devices and systems that have been focused on the Terahertz Basic Research Section of Electronics and Telecommunication Research Institute.
자장강화된 유도결합형 플라즈마를 이용한 산화막 식각에 대한 연구
안경준(K. J. An),김현수(H. S. Kim),우형철(R. Woo),유지범(J. B. Yoo),염근영(G. Y. Yeom) 한국진공학회(ASCT) 1998 Applied Science and Convergence Technology Vol.7 No.4
본 연구에서는 자장강화된 유도결합형 플라즈마를 사용하여 이 플라즈마의 특성을 조사하고 또한 산화막 식각에 미치는 영향에 대하여 조사하였다. 자장 강화를 위해 4쌍의 영구자석이 사용되었고, 산화막 식각을 위해 C₂F_6, CHF₃, C₄F_8 가스 및 이들 혼합가스가 사용되었으며 첨가가스로 H₂를 사용하였다. 자장강화된 유도결합형 플라즈마 특성 분석을 위해 Langmuir probe 와 optical emission spectrometer를 이용하였으며 산화막 식각 속도 및 photoresist에 대한 식각 선택비를 stylus profilometer를 이용하여 측정하였다. 이온 밀도에 있어서 자장 유무에 따른 큰 변화는 관찰되지 않았으나 이온전류밀도의 균일도는 자장을 가한 경우 웨이퍼가 놓이는 기판 부분에서 상당히 증가된 것을 알 수 있었다. 또한 자장이 가해진 경우, 자장을 가하지 않은 경우에 비해 플라즈마 전위가 감소된 반면 전자온도 및 라디칼 밀도는 크게 증가되는 것을 알 수 있었으며 산화막 식각시에도 높은 식각 속도와 식각 균일도를 보였다. 산화막 식각을 위해 수소가스를 사용한 가스조합중에서 C₄F_8/H₂가스조합이 가장 우수한 식각 속도및 photoresist에 대한 식각 선택비를 나타내었으며 공정변수를 최적화 함으로써 순수 C₄F_8에서 4이상의 선택비와 함께 8000 Å/min의 가장 높은 식각속도를 얻을 수 있었으며, 50%C₄F_8/50%H₂에서 4000 Å/min의 산화막 식각 속도와 함께 15이상의 식각 선택비를 얻을 수 있었다. In this study, the effects of multi-dipole type of magnets on the characteristics of the inductively coupled plasmas and SiO₂ etch properties were investigated. As the magnets, 4 pairs of permanent magnets were used and, to etch SiO₂, C₂F_6, CHF₃, C₄F_8, H₂, and their combinations were used. The characteristics of the magnetized inductively coupled plasmas were investigated using a Langmuir probe and an optical emission spectrometer, and SiO₂ etch rates and the etch selectivity over photoresist were measured using a stylus profilometer. The use of multi-dipole magnets increased the uniformity of the ion density over the substrate location even though no significant increase of ion density was observed with the magnets. The use of the magnets also increased the electron temperature and radical densities while reducing the plasma potential. When SiO₂ was etched using the fluorocarbon gases, the significant increase of SiO₂ etch rates and also the increase of etch uniformity over the substrate were obtained using the magnets. In case of gas combinations with hydrogen, C₄F_8/H₂showed the highest etch rates and etch selectivities over photoresist among the gas combinations with hydrogen used in the experiment. By optimizing process parameters at 1000 Watts of inductive power with the magnets, the highest SiO₂ etch rate of 8000 Å/min with the etch selectivity of 4 could be obtained for 100% C₄F_8 and the highest etch selectivity of over 15 with the SiO₂ etch rate of 4000 Å/min could be obtained for 50% C₄F_8/50% H₂.
수술후 잔위에서 Helicobacter pylori의 분포와 조직학적 위염 정도의 상관성
서정인 ( J. I. Seo ),박광하 ( K. H. Park ),김현수 ( H. S. Kim ),박동훈 ( D. H. Park ),김문영 ( M. Y. Kim ),백순구 ( S. K. Baik ),이동기 ( D. K. Lee ),권상옥 ( S. O. Kwon ) 대한소화기학회 2002 대한소화기학회 춘계학술대회 Vol.2002 No.-
<목적> 위부분절제술 후 약 60-100%에서 알카리 역류성 위염이 발생하며 주로 문합부에 발생되고 분문부에는 발생 빈도가 적은 것으로 알려져 있다. 이러한 잔위염의 발생에는 담즙의 역류가 관여하여 Helicobacter pylori의 역할에 대하여는 논란이 있다. 본 연구는 위부분절제술 후 잔위에서 H. pylori의 분포와 감염 여부에 따른 위염 정도의 상관성을 알아보고자 하였다. <방법> 2001년 2월부터 8월까지 원주기독병원 소화기내과에 내원한
핀을 가진 원통형 보강재로 보강된 구조물의 진동 특성에 관한 연구
김현수(H. S. Kim),박정호(J. H. Park),조우석(W. S. Cho),김형준(H. J. Kim),최태원(T. W. Choi) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.10
In general, the reinforcement of a structure is performed with cylinders. In this study, it is attempted to analyze the circular reinforcement with fins. And the natural frequency is investigated for the circular reinforcement between two plates. The shape of models are : one which has only circular reinforcements of different diameters and one which has circular reinforcements with fins and one which has fin of same length and circular cylinders of different diameters. And in each model, there are two kinds; one is with upper and lower plates and the other with none.
평면 힌지메커니즘을 이용한 광대역 진동 에너지 하베스터 설계
김현수(H.S.Kim),김준우(J.W.Kim),최용제(Y.J.Choi) 한국에너지학회 2014 한국에너지공학회 학술발표회 Vol.2014 No.11
본 연구는 평면 광대역 에너지 하베스터 장치를 설계하는 것을 목적으로 한다. 진동 모우드의 기하적 관계를 고려하여 세 개의 공진 주파수를 가깝게 배치하고 각각의 공진 피크의 크기를 유사하게 설계함으로써 넓은 주파수 대역을 확보하였다. 힌지 메커니즘의 설계를 통해 시스템의 강성을 합성하고, 피에조 필름을 하베스터로 사용하는 형태를 제안하였다. 상용 수치해석 프로그램인 ANSYS를 이용하여 모우드 해석을 수행함으로써, 제안한 설계방법의 타당성을 검증하였다. In this research, a novel planar vibration-based energy harvester which has wide bandwidth is proposed. Wide bandwidth is achieved by designing harvester such that three resonant frequencies of device are close to each other and the peak amplitudes at those frequencies are same. The stiffness of the system is synthesized by designing hinge mechanism, and PZT film is considered as harvester. In order to verify the proposed design method, modal analysis is conducted by using ANSYS.