http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Leuconostoc mesenteroides와 Lactobacillus bulgaricus를 이용한 고점도 발효유의 제조
배동훈,권경렬 단국대학교 신소재기술연구소 1992 신소재 Vol.2 No.-
Leuconstoc mesenteroides와 Lactobacillus bulgaricus를 이용한 고점도의 발효유 제조에 관한 조건을 검토하였다. 발효유 제조의 최적 조건은 Skim milk 10%, yeast extract 0.2%, sucrose 10% 및 pH 6.8이였으며 배양온도는 30℃가 가장 좋았다. 접종비율에 의한 점도는 Leuconostoc mesenteroides와 Lactobacillus bulgaricus의 접종비가 1 : 1일 때 가장 높은 점도를 보였다. 수소이온농도는 혼합배양이 각각의 단독배양에 비하여 낮게 나타났으며 배양 12시간부터 높은 산도를 유지하였다. 24시간 배양한 혼합발효유의 총생균수는 8.7×10^9으로 단독배양의 경우보다 높게 나타났으며 이때의 점도는 2750 cps이었다. The conditions for the production of viscosity fermented milk by mixed culture method using Leuconostoc mesenteroides and Lactobacillus bulgaricus has been studied. The media composition and culture condition for optimum production of viscosity fermented milk were as follows: 10% f skim milk, 0.2% of yeast extract, 10% of sucrose, pH 6.8 and 30℃. Highest viscosity of culture broth was obtained with the same inoculation ratio of each microorganism. The final pH or mixed culture fermentation broth was ower than that of single culture broth of each microorganism. The total number of lactic acid bacteria and viscosity in final mixed culture broth after 24 hours of inoculation was 8.7×10^9 cells/m/ and 2750 cps. respectively.
임동열,김현철,허복,김광훈,손권,박정길 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.1
본 연구의 목적은 근관치료 된 치아를 구조와 물성이 다른 post와 core 그리고 전장관으로 수복한 후 과도한 교합하중을 가했을 때 치아에 나타나는 응력분포를 조사하기 위함이다. 발치 된 상악 제2소구치를 micro-CT로 단층촬영하고 3D Doctor로 윤곽선을 추출한 다음 HyperMesh Ver. 6으로 삼차원 치아모형을 만들고 다음과 같은 세 가지 방볍으로 수복한 유한요소모형을 제작하였다. 1) 스테인레스 스틸 포스트와 복합레진 코어 그리고 도재소부전장금관으로 수복한 모형 2) fiber 포스트와 복합레전 코어 그리고 전부도재관으로 수복한 모형 . 3)포스트, 코어와 전장관이 일체형인 간접복합레진 EndoCrown으로 수복한 모형. 형성된 모형의 협측 또는 설측교두에 500N의 하중을 가하였으며 하중의 방향은 치아 장축에 대해 45도 이었다. 치관부와 치근부의 von Mises 응력을 ANSYS 9.0 프로그램으로 분석한 결과 포스트와 코어의 형태보다는 전장관 재료의 탄성계수가 근관치료된 상악 소구치의 응력분포를 좌우하였다. 치관부에서는 재료의 탄성계수가 높은 전장관으로 수복한 모형이 낮은 응력분포를 보였다. 치근부에서는 재료의 탄성계수가 낮은 전장관으로 수복한 모형이 낮은 응력분포를 보였다 The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treatcd maxillary second premolars using 3D FE analysis Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An obliquc 500 N was applied on thc buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was thc primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at thc coronal structure could be lowered through the use of definitive restoration of high elastic modulus The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.
LRFD 설계법에 의한 강박스거더 합성형교 설계 프로그램
김천용,권태형,이창열,신동구 明知大學校 産業技術硏究所 2006 産業技術硏究所論文集 Vol.25 No.-
A C++ based computer program for the design of composite steel-concrete box girder by the LRFD method is developed. The program consists of a main program, a header program, and 16 function programs. The load analysis for live and dead loads is performed by using the influence line based on the 3-moment method. For the design of box girder, strength limit states, fatigue limit state, and service limit state are considered. In addition, the constructibility of the girder is also checked. The validity of the program is demonstrated by comparing the design result for 3-span continuous box girder by the present program with the one by hand-calculation.
김재도,전병철,권택열,이영곤,신동훈 한국레이저가공학회 2000 한국레이저가공학회지 Vol.3 No.3
For the direct metal shape processing the powder feed device which is different from the widely used in rapid prototyping. Is developed, The three dimensional object is shaped with the melting metal powder. The developed research has applied to rapid prototyping in ultraprecision for MEMS and medical science fields required of rapid manufacture of complex shape. The goal of this study make 3D model which has precision accuracy. Powder spreading apparatus has been more improved because that the control of powder spread is very important in layer manufacturing. It consists of the vibration motor, nozzle and tube which supplies various metal powder. This apparatus could control the spreading velocity that could control powder spreading thickness. Laser on/off switch was adapted because laser scanning velocity must be preserved constantly to prevent heat transformation of laser overheating. The error between sintered thickness and experimental one occurred by shrinkage in sintering melting process. The problem of heat transformation was solved by On/Off switching system.
신동열(Dong-Yeol Shin),박민호(Min-Ho Park),권태호(Tae-Ho Kwon),김동명(Dong-Myung Kim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
분산전원 연계선로는 단방향 수지상 공급선로와 다르게 부하와 전원이 혼재된 양방향 전력공급의 형태로 계통이 구성되고 있어 전원계통에서 지락고장이나 불평형 부하발생시 변전소의 OCR계전기, 배전선로의 리크로저 또는 자동화 개폐기에서 잘못된 정보(거짓FI)에 의해 오동작 현상이 간혹 발생된다. 또한 분산전원 연계선로에 연계된 발전고객은 발전설비와 무관하게 한전 전원측 계통에서 지락, 전선단선, 불평형 부하발생시 보호계전기를 오동작 시키게 된다[1]. 본 논문은 양방향 계통에서 보호계전기 설치점 기준으로 전원측 고장인지, 부하측 고장인지 고장의 방향을 판단하는 새로운 알고리즘을 제시하였다.
Dong, Ki-Young,Choi, Jinnil,Lee, Yang Doo,Kang, Byung Hyun,Yu, Youn-Yeol,Choi, Hyang Hee,Ju, Byeong-Kwon Springer 2013 Nanoscale research letters Vol.8 No.1
<P>Carbon nanotubes (CNT) are extremely sensitive to environmental gases. However, detection of mixture gas is still a challenge. Here, we report that 10 ppm of carbon monoxide (CO) and ammonia (NH<SUB>3</SUB>) can be electrically detected using a carboxylic acid-functionalized single-walled carbon nanotubes (C-SWCNT). CO and NH<SUB>3</SUB> gases were mixed carefully with the same concentrations of 10 ppm. Our sensor showed faster response to the CO gas than the NH<SUB>3</SUB> gas. The sensing properties and effect of carboxylic acid group were demonstrated, and C-SWCNT sensors with good repeatability and fast responses over a range of concentrations may be used as a simple and effective detection method of CO and NH<SUB>3</SUB> mixture gas.</P>