http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Research on Whole‑Process Tensile Behavior of Headed Studs in Steel–Concrete Composite Structures
Liang?Dong Zhuang,Hong?Bing Chen,Yuan Ma,Ran Ding 한국콘크리트학회 2021 International Journal of Concrete Structures and M Vol.15 No.4
The headed studs have been widely applied in steel–concrete composite structures as shear connectors. However, the tensile performance of headed studs is also key to the structural performance in many cases such as the semi-rigid composite joints including steel beam–concrete wall joint and steel column–base joint. Therefore, this study presents experimental and analytical study on the whole-process tensile behavior of headed studs. Tests on a total of 33 pullout specimens are first conducted. The tensile capacity and load–deformation behavior of the anchorage concrete, which dominates the structural performance of headed studs, are thoroughly analyzed. In addition, test data in the literature are collected for quantitatively evaluating the influence of embedment depth, bearing area, boundary conditions, and concrete strength on the tensile behavior of the anchorage concrete. On the basis of the influence evaluation, an analytical model represented by a piecewise function is proposed to describe the whole-process load–deformation behavior of the anchorage concrete and validated through the comparison between the predicted curves and all collected experimental results. Then the proposed model is applied to simulate the rotational behavior of the typical semi-rigid joint anchored by headed studs, which takes the contribution of the anchorage concrete into consideration, and is verified by experimental results. The research findings indicate that tensile behavior of anchorage concrete is crucial to the structural performance of semi-rigid joints, even for headed studs with large embedment depth and bearing area.
Fan Liang-Liang,Du Ran,Liu Ji-Shi,Jin Jie-Yuan,Wang Chen-Yu,Dong Yi,He Wan-Xia,Yan Ri-Qiang,Xiang Rong 생화학분자생물학회 2022 Experimental and molecular medicine Vol.54 No.-
Reticulon 3 (RTN3) is an endoplasmic reticulum protein that has previously been shown to play roles in neurodegenerative diseases, but little is known about its function in the kidneys. The aim of the present study was to clarify the roles of RTN3 in chronic kidney disease (CKD) and kidney fibrosis. In this study, RTN3 levels were measured in kidney tissues from healthy controls and CKD or kidney fibrosis patients. An RTN3-null mouse model was generated to explore the pathophysiological roles of RTN3 in the kidneys. The underlying mechanisms were studied in primary proximal tubular epithelial cells and HEK293 cells in vitro. The results showed that (1) a reduction in RTN3 in mice induces CKD and kidney fibrosis; (2) decreased RTN3 expression is found in patients with CKD; (3) RTN3 plays critical roles in regulating collagen biosynthesis and mitochondrial function; and (4) mechanistically, RTN3 regulates these phenotypes by interacting with GC-Rich Promoter Binding Protein 1 (GPBP1), which activates the IGF2-JAK2-STAT3 pathway. Our study indicates that RTN3 might play crucial roles in CKD and kidney fibrosis and that a reduction in RTN3 in the kidneys might be a risk factor for CKD and kidney fibrosis.
Biphasic effects of TGFβ1 on BMP9-induced osteogenic differentiation of mesenchymal stem cells
( Rui Dong Li ),( Zhong Liang Deng ),( Ning Hu ),( Xi Liang ),( Bo Liu ),( Jin Yong Luo ),( Liang Chen ),( Liang Jun Yin ),( Xiao Ji Luo ),( Wei Shui ),( Tong Chuan He ),( Wei Huang ) 생화학분자생물학회(구 한국생화학분자생물학회) 2012 BMB Reports Vol.45 No.9
We have found that the previously uncharacterized bone morphogenetic protein-9 (BMP9) is one of the most osteogenic factors. However, it is unclear if BMP9 cross-talks with TGFβ1 during osteogenic differentiation. Using the recombinant BMP9 adenovirus, we find that low concentration of rhTGFβ1 synergistically induces alkaline phosphatase activity in BMP9-transduced C3H10T1/2 cells and produces more pronounced matrix mineralization. However, higher concentrations of TGFβ1 inhibit BMP9-induced osteogenic activity. Real-time PCR and Western blotting indicate that BMP9 in combination with low dose of TGFβ1 potentiates the expression of later osteogenic markers osteopontin, osteocalcin and collagen type 1 (COL1a2), while higher concentrations of TGFβ1 decrease the expression of osteopontin and osteocalcin but not COL1a2. Cell cycle analysis reveals that TGFβ1 inhibits C3H10T1/2 proliferation in BMP9-induced osteogenesis and restricts the cells in G0/G1 phase. Our findings strongly suggest that TGFβ1 may exert a biphasic effect on BMP9-induced osteogenic differentiation of mesenchymal stem cells. [BMB Reports 2012; 45(9): 509-514]
Wei-dong Wang,Li-hua Zhang,Jia-Yan Ni,Xiong-ying Jiang,Dong Chen,Yao-ting Chen,Hong-liang Sun,Jiang-hong Luo,Lin-feng Xu 대한영상의학회 2018 Korean Journal of Radiology Vol.19 No.4
Objective: To meta-analytically compare combined transarterial chemoembolization (TACE) plus radiofrequency ablation (RFA) and surgical resection (SR) for the treatment of hepatocellular carcinoma (HCC) within the Milan criteria. Materials and Methods: PubMed, Medline, Embase, and Cochrane Library were searched for studies comparing these two therapies that were published between January 2006 and August 2017. Overall survival rate (OS), recurrence-free survival rate (RFS), major complications and the average length of hospital stay were compared between these two therapies. Metaanalytic pooled odds ratio (OR) was calculated using TACE plus RFA as the base category. Results: Seven case-control studies and one randomized trial were identified. Meta-analytic results revealed that, compared with SR, TACE plus RFA had significantly higher 1-year OS (OR for survival = 0.50, p = 0.009) and lower major complications (OR = 1.88, p = 0.02) after therapy. Three studies reported on the length of hospital stay. The average length ± standard deviation reported in individual studies for SR and TACE plus RFA groups was 19.8 ± 8.4 days and 7.4 ± 2.2 days, respectively; 18.7 ± 4.9 days and 11.5 ± 6.9 days, respectively; and 16.6 ± 6.7 days and 8.5 ± 4.1 days, respectively (p < 0.0001 for all studies). Three or 5-year OS and 1-, 3-, or 5-year RFS did not significantly differ between the two therapies. Conclusion: Combined TACE plus RFA may be an alternative to SR for the treatment of patients with HCC within Milan the criteria. Non-randomized design in most of the original studies was a limitation.
Li-jun Liang,Chen-xi Hu,Yi-xuan Wen,Xiao-wei Geng,Ting Chen,Guo-qing Gu,Lei Wang,You-you Xia,Yong Liu,Jia-yan Fei,Jie Dong,Feng-hua Zhao,Yiliyar Ahongjiang,Kai-yuan Hui,Xiao-dong Jiang 대한암학회 2020 Cancer Research and Treatment Vol.52 No.2
Purpose This study aimed to investigate the potential systemic antitumor effects of stereotactic ablative radiotherapy (SABR) and apatinib (a novel vascular endothelial growth factor receptor 2 inhibitor) via reversing the immunosuppressive tumor microenvironment for lung carcinoma. Materials and Methods Lewis lung cancer cells were injected into C57BL/6 mice in the left hindlimb (primary tumor; irradiated) and in the right flank (secondary tumor; nonirradiated). When both tumors grew to the touchable size, mice were randomly divided into eight treatment groups. These groups received normal saline or three distinct doses of apatinib (50 mg/kg, 150 mg/kg, and 200 mg/kg) daily for 7 days, in combination with a single dose of 15 Gy radiotherapy or not to the primary tumor. The further tumor growth/regression of mice were followed and observed. Results For the single 15 Gy modality, tumor growth delay could only be observed at the primary tumor. When combining SABR and apatinib 200 mg/kg, significant retardation of both primary and secondary tumor growth could be observed, indicated an abscopal effect was induced. Mechanism analysis suggested that programmed death-ligand 1 expression increased with SABR was counteract by additional apatinib therapy. Furthermore, when apatinib was combined with SABR, the composition of immune cells could be changed. More importantly, this two-pronged approach evoked tumor antigen–specific immune responses and the mice were resistant to another tumor rechallenge, finally, long-term survival was improved. Conclusion Our results suggested that the tumor microenvironment could be managed with apatinib, which was effective in eliciting an abscopal effect induced by SABR.
Research on Concrete Cracks Recognition based on Dual Convolutional Neural Network
Dong Liang,Xue-Feng Zhou,Song Wang,Chen-Jing Liu 대한토목학회 2019 KSCE JOURNAL OF CIVIL ENGINEERING Vol.23 No.7
Cracks are the most common and important diseases of concrete bridges. A dual convolutional neural network (DCN) model which is composed of one convolutional neural network (CNN) model and one fully convolutional network (FCN) model is proposed to recognize the cracks in image. Firstly, the CNN model is used to identify the crack area. The interfering factors such as spot, shadow, water stain, and graffiti in the non-crack area will be excluded by CNN model. Then, the CNN results will be segmented by the FCN model with the structure of merging layer-by-layer to extract crack features such as length and width. The DCN model is trained to recognize the actual concrete bridge cracks in this paper. The recognition results show that the DCN model has a good balance between high accuracy and low noise in the process of crack recognition compared with the current image recognition method. The reliability and accuracy of recognition are both greatly improved. The DCN model is helpful for automatic identification of cracks in concrete bridges.
Liang, Chi-Te,Lin, Li-Hung,Kuang Yoa, Chen,Lo, Shun-Tsung,Wang, Yi-Ting,Lou, Dong-Sheng,Kim, Gil-Ho,Yuan-Huei, Chang,Ochiai, Yuichi,Aoki, Nobuyuki,Chen, Jeng-Chung,Lin, Yiping,Chun-Feng, Huang,Lin, Sh Springer 2011 Nanoscale research letters Vol.6 No.1
<P>A direct insulator-quantum Hall (I-QH) transition corresponds to a crossover/transition from the insulating regime to a high Landau level filling factor ν > 2 QH state. Such a transition has been attracting a great deal of both experimental and theoretical interests. In this study, we present three different two-dimensional electron systems (2DESs) which are in the vicinity of nanoscaled scatterers. All these three devices exhibit a direct I-QH transition, and the transport properties under different nanaoscaled scatterers are discussed.</P>
Dong Liang,Bingkui Chen,Yane Gao 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.
Theoretical and experimental investigations on parallel-axis gears with tubular meshing surfaces are performed in this study. Based on theory of conjugate curves, the parametric design for tubular tooth profiles is provided and solid models are established for motion simulation. Tubular meshing surfaces are evaluated according to geometric and meshing characteristics including undercutting condition, interference with engagement and curvature, calculation of sliding ratios, and successive meshing property. The meshing essence of tubular tooth surfaces is determined. The mechanics properties of tooth surfaces are analyzed using the finite element method. The contact stress, meshing law and deformation analysis of tooth surfaces are presented. The transmission efficiency experiment is based on the developed gear prototype, and a comparison of the prototype with an involute gear drive is provided. Further research on the dynamics analysis and key manufacturing technology will be conducted, and this gear drive is expected to exhibit excellent transmission performance.
Hobbing Manufacturing of New Type of Involute-Helix Gears for Wind Turbine Gearbox
Dong Liang,Bingkui Chen,Yane Gao 한국정밀공학회 2019 International Journal of Precision Engineering and Vol.6 No.2
The involute gears are widely used in the gearbox for wind turbine. To satisfy the requirements of reduction of noise and increase of the endurance of the gear drive, the new type of involute-helix gears, which have the advantages of involute gears and circular arc gears, had been proposed. In this paper, the hobbing cutters of involute-helix gears are designed utilizing the normal section of convex and concave tooth profiles, respectively. Mathematical models of hobbing cutters are established and general products are also manufactured. Using the developed hobbing cutters, the proposed gear pair is manufactured based on the numerical control technology. Combining with the measure method of gear measuring center and the characteristic of the investigated gears, the method of error measurement of special tooth profiles is provided. The further development of special detection software for the gears will be carried out. The results will lay the foundations for the large-scale industrial practice and production applications of gear drive.