http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황주환,강주희,이기환,이재훈,이상무,김남형,김주영,김은중,Hwang, Joo Hwan,Kang, Ju Hui,Lee, Ki Hwan,Lee, Jae Hoon,Lee, Sang Moo,Kim, Nam Hyung,Kim, Joo Young,Kim, Eun Joong Korean Association of Organic Agriculture 2014 韓國有機農業學會誌 Vol.22 No.4
Antioxidant activity is important for reducing oxidative stress that causes various metabolic disorders. Metabolic disorders are highly related to loss of productivity in livestock. Therefore, development of effective antioxidant compounds originating from plants is important for organic agriculture. Phenolic compounds in edible plants are regarded as major components relevant to antioxidant activity. The present study investigated the changes in antioxidant activity and phenolic compound profiles of Aronia (Aronia meloncarpa) by fermentation using different strains of Leuconostoc mesenteroides. A total of 5 strains of L. mesenteroides were used as starter cultures and their ${\beta}$-glucosidase activities were measured. A total of 6 experiment runs were prepared, one for control (uninoculated) and the others (inoculated) for treatments. For biological activity, antioxidant and antibacterial activities were measured. For phenolic compound profiling, TLC and HPLC analysis were performed. The strains of KACC12313 and KACC12315 showed greater enzyme activity than others. Treatment with KCCM35046 showed strong and broad antibacterial activity against to Listeria monocytogenes. Treatments with KCCM35046 and KACC12315 showed the highest total polyphenol content. The highest antioxidant activity was found in KACC12315 treatment. No remarkable alteration was found in thin layer chromatography (TLC) analysis. In phenolic compound profiling analysis, KCCM35046 showed notable alteration in compound area ratio compared to others and also showed the highest caffeic acid content. In chlorogenic acid, treatments with KCCM35046 and KACC12315 showed great content than others. Treatment with KACC12315 showed the greatest content of trans-ferulic acid. As a result of relative performance indexing analysis, L. mesenteroides KCCM35046 and KACC12315 were selected as the best strain for the fermentation of Aronia.
고내구성능을 갖는 해저터널 방화문 설계방안 및 성능시험 연구
박상헌,황주환,최영환,안승주,유용호,Park, Sang-Heon,Hwang, Ju-Hwan,Choi, Young-Hwan,An, Sung-Joo,Yoo, Yong-Ho 한국터널지하공간학회 2018 한국터널지하공간학회논문집 Vol.20 No.2
In the tunnel of domestic high - speed railway, the main fire - fighting facility, fire - extinguishing passageway, is installed. However, due to the high pressure of the high - speed train, frequent breakage and maintenance are caused by strong shock and long - term vibration. In order to solve these problems, it is necessary to improve the fire door, but in Korea, it is installed by submitting a certificate by simple KS F 2296 performance test. At present, it is developed as a simple test certification by producing a real scale fireproof door without the theoretical examination in advance, so that a high cost for improvement is occurring in Korea. Therefore, through this study, structural analysis study which can preliminary structure review was carried out in order to design the refuge connection passage fire door and to improve the performance improvement. In order to secure the reliability of the result value, the official authentication test (KS F 2296) were compared. 국내 고속철도 터널에 주요 방재시설물인 피난연결통로 방화문이 설치되고 있으나, 고속으로 통행하는 열차의 고압력으로 인하여 방화문에 강한 충격 및 장기간 진동으로 인하여 잦은 파손 및 유지보수가 발생되고 있다. 이러한 문제를 해결하기 위해 방화문 개선이 필요하나, 국내에서는 단순 KS F 2296 성능시험에 의한 인증서를 제출하여 설치되고 있다. 현재 국내에서는 사전에 이론적인 검토 없이 실규모 방화문 제작에 의한 단순 시험인증 여부로 개발 되다보니, 개선을 위한 고비용이 발생되고 있는 실정으로 사전에 구조적인 안전을 확보할 수 있는 설계방안의 검토가 필요하다. 따라서 본 연구를 통하여 피난연결통로 방화문 설계 및 성능개선 효율화를 위해 사전 구조 검토가 가능한 구조해석 연구를 수행하였으며, 이러한 결과 값에 대한 신뢰성을 확보하기 위해 실규모 시작품 제작을 통한 공인 인증시험(KS F 2296)에서 발생된 결과 값을 비교검토 하였다.
신재철,황주환,이상규,이시원,Shin. Jae Choul,Hwang. Ju Hwan,Lee. Sang Gyu,Lee. Si Won 한국방재학회 2012 한국방재학회논문집 Vol.12 No.3
최근 들어서 건축분야뿐만 아니라 토목분야에서도 정보통합 설계기법인 BIM 적용이 활성화 되고 있다. 이러한 과정의 일환으로 본 연구에서는 NATM 터널 1개소와 PSC 거더 교량 1개소를 대상으로 BIM 모델링을 통한 물량산출과 기존 2D 기반의 물량과의 오차율을 이용한 신뢰성 분석을 수행하였다. 또한 정보통합의 시작단계로써, 설계단계 BIM 활성화를 위한 국부적인 수량산출서 자동화 개발을 위해 BIM 기반 표준분류체계를 NATM 터널 및 PSC 거더 교량을 대상으로 안을 제시하고, 자동코드번호 입력 프로그램, 연동 및 수동물량산출 프로그램, 수량산출서 문서자동화 프로그램 등의 개발을 추진 중에 있으며, 이에 대한 단계별 절차와 방법을 제시하고자 한다. In recent years apply BIM, design method of information integration, the field of architecture as well as the field of civil engineering is activated. As part of this process, in this study, a NATM tunnel and PSC Girder bridge were the target. Quantities with BIM modeling and quantities with traditional 2D-based reliability analysis was performed using the error rate. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. BIM-based standard classification system for NATM tunnel and PSC Girder bridge is proposed to target. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.
3차원 레이저 스캐너 및 BIM을 활용한 터널 과대.과소 굴착 평가
박정준,신재철,황주환,이강현,서형준,이인모,Park, Jeong-Jun,Shin, Jae-Chou,Hwang, Ju-Hwan,Lee, Kang-Hyun,Seo, Hyung-Joon,Lee, In-Mo 한국터널지하공간학회 2012 한국터널지하공간학회논문집 Vol.14 No.4
최근 3차원 레이저 스캐너는 토목 분야의 적용에 관한 다수의 연구가 수행되고 있으며, 연구 분야 역시 터널 및 교량, 토공량 산정, 시공검측, 암반절리 측정 등 여러 분야에서 이루어지고 있다. 그 중 터널 시공 시 여굴량 및 미굴량을 산정함에 있어 3차원 레이저 스캐너를 활용하는 연구가 점차적으로 이루어지고 있으며, 지금까지의 연구는 스캔 데이터와 2차원 CAD 도면과의 비교를 통해 여굴량 및 미굴량을 산정하는 방식으로 이루어 졌다. 그러나 터널이 비교적 단순한 형상의 구조물이라 하더라도 3차원 형상의 구조물로 정확한 여굴량 및 미굴량을 산정하기 위해서는 3차원적인 비교가 필요하다. 본 연구에서는 3차원 레이저 스캐너로 획득한 스캔 데이터와 3차원 설계 모델링인 BIM을 활용하여 시공시 발생하는 여굴량 및 미굴량을 산정하는 시공오차 평가 프로그램을 개발하였으며, 이를 위한 효율적인 스캔 데이터의 처리 프로세스를 제안하였다. 또한 실제 현장에 3차원 레이저 스캐너를 적용하여 시공오차를 산정하였으며, 프로그램의 성능을 검증하였다. Application of 3D laser scanner to civil engineering is widely studied in various fields such as tunnel, bridge, calculation of earth volume, construction measurement, observation of rock joint, etc. Some studies on utilization of the 3D laser scanner for calculating the over-break and/or under-break of tunnels have also been carried out. However, in the previous research, the scanning data were usually compared with the 2D CAD blueprint results; although the shape of tunnel structure is relatively simple, for precise calculation of the over-break and/or under-break of tunnels, three-dimensional analysis based on BIM is needed. Therefore, in this paper, a new program that calculates the over-break and/or under-break of tunnels using the 3D laser scanner and the BIM is developed; moreover the effective and rapid process of data treatment is proposed. The accuracy of the developed program was verified by applying the new system to a real tunnels construction field.