http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황종하,이기태 한양대학교 세라믹연구소 2018 Journal of Ceramic Processing Research Vol.19 No.5
MgO or gadolinium-doped ceria (GDC, Ce0.9Gd0.1O2-δ) was added as a promoter to improve the oxygen transfer kinetics ofMgMnO3 oxygen carrier material for chemical looping combustion. Neither MgO nor GDC reacted with MgMnO3, even atthe high temperature of 1100 oC. The average oxygen transfer capacities of MgMnO3, 5 wt% MgO-MgMnO3, and 5 wt%GDC-MgMnO3 were 8.74, 8.35, and 8.13 wt%, respectively. Although the addition of MgO or GDC decreased the oxygentransfer capacity, no further degradation was observed during their use in 5 redox cycles. The addition of GDC significantlyimproved the conversion rate for the reduction reaction of MgMnO3 compared to the use of MgO due to an increase in thesurface adsorption process of CH4 via oxygen vacancies formed on the surface of GDC. On the other hand, the conversionrates for the oxidation reaction followed the order 5 wt% GDC-MgMnO3 > 5 wt% MgO-MgMnO3 >> MgMnO3 due tomorphological change. MgO or GDC particles suppressed the grain growth of the reduced MgMnO3 (i.e., (Mg,Mn)O) andincreased the specific surface area, thereby increasing the number of active reaction sites.
다성분 해저면 탄성파 탐사자료에 대한 음향파 완전파형역산 전략
황종하,오주원,이진형,민동주,정희철,송영수 한국지구물리.물리탐사학회 2020 지구물리와 물리탐사 Vol.23 No.1
Full-waveform inversion (FWI) is an optimization process of fitting observed and modeled data to reconstruct high-resolution subsurface physical models. In acoustic FWI (AFWI), pressure data acquired using a marine streamer has mainly been used to reconstruct the subsurface P-wave velocity models. With recent advances in marine seismicacquisition techniques, acquiring multi-component data in marine environments have become increasingly common. Thus, AFWI strategies must be developed to effectively use marine multi-component data. Herein, we proposed an AFWI strategy using horizontal and vertical particle-acceleration data. By analyzing the modeled acoustic data and conducting sensitivity kernel analysis, we first investigated the characteristics of each data component using AFWI. Common-shot gathers show that direct, diving, and reflection waves appearing in the pressure data are separated in each component of the particle-acceleration data. Sensitivity kernel analyses show that the horizontal particle-acceleration wavefields typically contribute to the recovery of the long-wavelength structures in the shallow part of the model, and the vertical particle-acceleration wavefields are generally required to reconstruct long- and short-wavelength structures in the deep parts and over the whole area of a given model. Finally, we present a sequential-inversion strategy for using the particle-acceleration wavefields. We believe that this approach can be used to reconstruct a reasonable P-wave velocity model, even when the pressure data is not available. 음향파 완전파형역산은 탄성파 탐사를 통해 얻은 관측자료와 음향파 모델링자료를 맞춤으로써 지층의 속도모델을 고해상도로 구축하는 최적화 과정이다. 기존의 스트리머를 이용한 해양 탄성파 탐사 자료에 대한 음향파 완전파형역산에서는 압력자료만을 활용하여 P파 속도모델을 구축한다. 그러나 최근 다성분 해저면 탄성파 탐사기술의 발달로 다성분자료의 취득 사례가 늘고 있으며, 이에 따라 해양에서 얻어지는 다성분 자료를 활용한 음향파 완전파형역산 기법에 대한 연구가 필요하다. 이 연구에서는 수평 및 수직 입자가속도 자료를 활용한 효과적인 음향파 완전파형역산 전략을 제시하고자 한다. 이를 위해, 우선 음향파 모델링으로 제작된 압력 및 입자가속도 자료와 민감도커널을 분석하여 파형역산 과정에서 각 자료의 성분별 특성을 관찰하였다. 압력 자료에 함께 나타났던 직접파, 다이빙파 및 반사파가 수직 및 수평 입자가속도 자료에서 파동의 진행방향에 따라 분리되어 나타나는 것을 확인하였으며, 수평 입자가속도 자료는 상부의 장파장구조를, 수직 입자가속도 자료는 하부의 장파장구조와 전체 영역에서의 단파장구조를 구축하는 데 효과적임을 확인할수 있었다. 이러한 분석 결과를 바탕으로 입자가속도 자료만을 활용해 음향파 완전파형역산을 수행하는 순차적 자료 활용전략을 제시하며, 압력자료를 얻지 못하였거나 품질이 낮은 경우에도 입자가속도 자료를 활용하는 음향파 완전파형역산을 통해 양호한 P파 속도모델을 구축할 수 있을 것으로 기대된다.
3차원 그래픽 데이타베이스를 위한 시점기반의 방향관계 표현 기법
황종하,백중환,황수찬 한국정보과학회 2003 정보과학회논문지 : 데이타베이스 Vol.27 No.4
Spatial relations among objects are one of the most frequently used searching criteria for a query based on the contents of 3-D images. However, the existing researches have mainly focused only the absolute directional relations based on a fixed viewpoint in 2-D images. So, this paper presents a representation method of viewpoint-based directional relations that enables spatial relations among objects to be retrieved based on a viewpoint of an observer. The retrieval technique based on our method is also described. In this paper, the notion of 3D string is defined to express the spatial relations in a 3-D space. A retrieval method based on relative directional relations among objects from a viewpoint of an observer is also presented. The proposed method simplifies the retrieval of viewpoint-based directional relations because 2D+1D scheme reduces the dimension. 객체 사이에 존재하는 공간관계는 3차원 그래픽 이미지에 대한 내용기반 검색시 가장 자주 사용되는 조건 중의 하나이다. 그러나 기존 대부분의 공간관계에 대한 연구는 2차원 이미지에서 시점이 고정된 절대적인 방향관계에 대한 연구가 주를 이루고 있다. 따라서 본 논문에서는 3차원 공간에서 관측자의 시점을 기준으로 객체 사이의 방향관계를 검색할 수 있는 시점기반 방향관계 표현 기법을 제시하고 이를 이용한 검색 기법에 대해서 기술한다. 본 논문에서는 3차원 방향관계의 표현을 위해 절대시점 기반의 2차원 공간관계 표현 기법인 2D 스트링을 확장한 3D 스트링 기법을 정의하였다. 또한 관측자를 기준으로 한 객체들 간의 상대적인 방향관계를 효율적으로 추출하기 위한 기법을 제시한다. 본 논문에서 제시한 기법은 3D 스트링으로 표현된 3차원 객체의 공간관계를 2차원+1차원으로 분리하여 처리하도록 함으로서 차원의 감소를 통한 시점기반 방향관계 검색 과정을 단순화할 수 있다는 장점을 갖는다.