http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
생존분석을 이용한 디스플레이 FAB의 반송시간 예측모형
한바울,백준걸 대한산업공학회 2013 대한산업공학회 추계학술대회논문집 Vol.2013 No.11
평판 디스플레이 산업의 스케줄러(Scheduler)와 디스패칭(Dispatching) 시스템은 생산량과 고객납기를 만족시키기 위해 생산순서와 설비별 재공분배를 제어하는 주요 생산관리시스템이다. 디스패칭 시스템에서 반송시간(Delivery time)은 Lot의 공급 가능 시간을 계산하기 위한 핵심요소이다. 본 연구의 목적은 디스플레이 라인의 카세트(Cassette) 반송이력 자료를 생존분석 방법을 이용하여 반송시간에 영향을 주는 주요인자를 파악하고, 반송예측모형을 제시 하는 것이다. 생존분석 기법 중에서 중요 변수를 선택하기 위해 Cox비례위험모형을 이용하였다. 선정된 중요변수들과 반송시간과의 예측모형을 만들기 위해 가속화 고장시간(Accelerated failure time;AFT)모형을 이용하였다. 성능 비교는 반송 이력의 기술 통계치를 기반으로 만든 기존의 예측모형과 동일 변수를 사용한 선형회귀모형을 대상으로 실시하였다. 결과적으로 AFT 모형의 예측 성능이 평균제곱오차(MSE) 기준으로 기존 예측모형 대비 33.8%, 선형회귀모형 대비 5.3% 감소하였다. 생존 분석 모형을 이용하여 반송시간의 예측성능을 개선 한다면 생산성과 생산 관리시스템의 신뢰성 향상에 기여할 수 있을 것으로 기대된다.
주님의 공급하심 -고린도후서 8-9장에 나타난 바울의 구약 사용-
한바울 한국신학정보연구원 2012 Canon&Culture Vol.6 No.2
사도 바울은 성경을 적절히 사용하여 예루살렘에서 궁핍하게 살고 있는 사람들에게 도움의 손길을 더하라고 권면한다. 고린도후서 8:15과 9:9에서의 성서 인용은 사도 바울이 인용한 본문의 원 문맥을 알고 있음을 보여준다. 원 문맥과 사도 바울이 말하고자 하는 내용 사이에 상응이 있기 때문이다. 이러한 원 문맥과의 주제·형태적 상응은 사도 바울이 성서를 인용할 때 원래 표현을 그대로 옮겨 놓는 것보다는 성서의 주제와 형태를 사용하는 것에 더 관심이 있다는 것을 의미한다. 따라서 인용 소개 문구가 있다고 하더라도 인용된 본문이 글자 그대로 인용된다는 것을 보장하지 않는다(참조, 8:15). 더 나아가, 인용된 성서의 이해가 사도 바울의 생각을 파악하는 데 중요하고 이해를 풍성하게 하지만, 사도 바울의 기본적 취지는 성서를 잘 모르는 사람들에게도 명확하게 다가온다. 이는 인용문구 주위에 그의 의도가 충분히 명확하게 언급되어 있기 때문이다. 따라서 사도 바울은 성서를 인용할 때에 원 문맥의 주제를 다루고 있는 상황에 적용하면서도, 단락 마지막 부분에 성서를 인용함으로 수사학적으로 사용하기도 하는 것을 볼 수 있다(8:15). 마지막으로, 성서를 새로운 상황에 적용하는 것은 지시 대상의 변화를 가져오게 되어 있는데, 이러한 지시 대상의 변화로 다양한 식별 혹은 동일화가 이루어진다. 심지어 이러한 동일화는 사람을 하나님과 함께 식별하게 하는 경우도 있다. 그러나 이런 동일화는 사도 바울이 새롭게 도출해낸 것이 아니라 성서에 기반을 둔 것이라 볼 수 있다(참조, LXX 시 111, 112). In urging the Corinthian believers to contribute towards helping the needy in Jerusalem, Paul makes judicious use of Scripture. His quotations in 8:15 and 9:9 show that he is aware of the original contexts of the passages quoted since the immediate contexts of the cited passages correspond well with the flow of Paul’s statements. The apparent correspondences of theme and pattern with the bigger narrative in which the cited texts are placed mean that Paul is not so much concerned about exact reproduction of the original texts as using scriptural theme and pattern. Thus an introductory formula does not necessarily guarantee that what follows is a verbatim quotation of Scripture (cf. 8:15). Furthermore, even though Scriptural references are important and enriching for understanding Paul’s thought, his basic thrust is clear enough even for those without sufficient knowledge of Scripture since his points are clearly spelled out around his scriptural citations. This being the case, Paul can sometimes use Scripture rhetorically by quoting a text at a closing of a section (cf. 8:15), even as he brings the bigger narrative to shed light onto what is being addressed. Finally, his application of Scripture to a new context necessarily entails change of referents, resulting in various ‘identifications’ even to the extent of identifying persons with God. However, this is not a novel reading of Paul, but is rooted in the Scripture itself(cf. LXX Ps. 111 and 112).
경골 내 변형률 및 응력 분포 특성 분석을 통한 새로이 개발된 재치환용 인공슬관절의 생체역학적 안정성 평가: 유한요소해석
한바울,장영웅,유의식,김정성,김한성,임도형,Han, Paul,Jang, Young-Woong,Yoo, Oui Sik,Kim, Jung Sung,Kim, Han Sung,Lim, Dohyung 대한의용생체공학회 2013 의공학회지 Vol.34 No.1
In this study, biomechanical stability of the newly developed revision total knee arthroplasty (rTKA) was evaluated through strain and stress distribution analysis within the implanted proximal tibia using a three-dimensional finite element (FE) analysis. 2000N of compressive load (about 3 times body weight) was applied to the condyle surface on spacer, sharing by the medial (60%) and lateral (40%) condyles simulating a stance phase before toe-off. The results showed that PVMS within the revision total knee arthroplasty and the proximal tibia were less than yield strength considering safe factor 4.0 (rTKA: less than 10%, Cortical bone: less than 70%, Cancellous bone: less than 70%). The materials composed of them and the strain and stress distributions within the proximal tibia were generally well matched with those of a traditional revision total knee arthoplasty (Scorpio TS revision system, Stryker Corp., Michigan, USA) without the critical damage strain and stress, which may reduce the capacity for bone remodeling, leading to bone degeneration. This study may be useful to design parameter improvement of the revision total knee arthoplasty in biomechanical stability point of view beyond structural stability of revision total knee arthoplasty itself.
임도형,김한성,조영근,최현호,황성재,한바울,우대곤,황근배,김영호,추준욱,신태민 한국정밀공학회 2012 International Journal of Precision Engineering and Vol.13 No.3
The excessive accumulation of physical burden is known widely as one of the main factors underlying musculoskeletal disorders in the working population. The current study was performed to evaluate the loads imposed on the muscles and joints by excessive accumulation of physical burdens for the estimation of a potentiality of musculoskeletal disorder occurrence, particularly in vacuum cleaning works, the motions most commonly performed both at home and in industry. A survey, rapid entire body assessment, and experimental/ virtual three-dimensional motion analysis were performed. The results showed that latissimus dorsi and trapezius muscle strengths and elbow and shoulder joint moments were generally higher than other muscle strengths and joint moments generated during cleaning works. In addition, motions required cleaning in corners and in hard-to-reach areas generally required more muscle strengths and joint moments than other motions. These findings may be used in improvement of vacuum cleaner (a device to clean up dust and dirt usually from floors) design reducing a potentiality of musculoskeletal disorder occurrence due to repeated cleaning works, through consideration of a methodology capable of decreasing the loads imposed on the muscles and joints by repeated cleaning works. The findings can be also expanded to improvement of working environments in which pushing and pulling works (cleaning works mainly included pushing and pulling motions) frequently occur, to reduce a potentiality of musculoskeletal disorder occurrence due to pushing and pulling works.