http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조계산 선암사의 수경관에서 나타나는 외래적 형식에 관한 연구
하재호,홍광표 한국조경학회 1998 韓國造景學會誌 Vol.26 No.2
This study was carried out to investigate and analyze the waterscape of the Sunam Temple on Mt. Chokye over which controversies had been actively raised, especialy of its Japanese impacts, comparing the phenomena arising from it with those of Korean and Japanese traditional temples. And then the identity of the Sunam Temple was clarified in itself. It is concentrated on what exotic formation are found in waterscapes of the Sunam Temple and how they can be proved via what factors. The obtained results were as follows : 1. Two curved ponds located in the western part of the Iljumun gate have a specific features not visible in any other Korean traditional temples, serving as an object of interest. Such ponds with curved form in the Sunam Temple had an affinity to those of stroll-style garden in Kyoto area. 2. The winding waterway along with curved ponds in the west of the Iljumun gate was introduced into the Sunam Temple. Therby, it was an exceptional phenoma hardely found in the traditional temples of Korea. This study was a typical one, as found in the stroll Japanese temples. Especially, the swinding waterway found in both the Kinkakuji Temple and the Ginkakuji Temple designated as object temples of comparison in the present study.
하재호 한국보건사회연구원 2006 보건복지포럼 Vol.118 No.-
트랜스 지방산은 최근 많은 국민적 관심을 끌고 있다. 현재 트랜스 지방산에 대한 잘못된 정보가 범람하고 있고 이로 인한 불안감도 한층 심화되고 있다. 따라서 트랜스 지방산에 대하여 보다 정확히 알고 대책을 수립해야 할 것으로 생각되며 이를 위하여 다음과 같은 부분에서 정부, 연구소, 식품업계 및 학계에서의 노력이 필요할 것으로 생각된다. o 트랜스 지방산에 대한 표시제도의 신속 도입 o 트랜스지방산이 사람의 건강에 미치는 영향에 대하여 보다 자세한 홍보와 교육 강화 o 트랜스 지방산의 정의와 표준분석법에 대한 정확한 정보를 제공으로 식품업계의 지원 o 식품 중의 트랜스 지방산에 대한 정확한 분석을 통하여 지속적인 자료 축적 o 트랜스 지방산의 저감화를 위한 업계의 노력 o 트랜스 지방산 저감화와 모니터링에 대한 연구지원
다양한 하지층이 이중층의 응집현상에 미치는 영향에 관한 연구
하재호,류동훈,임현우,정지민,최호준,홍인기,고중혁,구상모,가미코 마사오,하재근,Ha, J.H.,Ryu, D.H.,Im, H.W.,Jung, J.M.,Choi, H.J.,Hong, I.G.,Koh, J.H.,Koo, S.M.,Kamiko, M.,Ha, J.G. 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.5
단결정 MgO (001) 기판에 DC 마그네트론 스퍼터로 하지층과 상지층으로 구성된 이중층을 증착, 열처리 온도와 시간을 고정시키고 이중층의 두께를 변화시켜 응집현상을 제어하여 자기구조화, 나노 구조화된 박막을 제작하였다. 진행한 실험에선 기존에 연구되었던 단층에서의 응집현상이 아닌 하지층과 상지층으로 구성된 이중층의 응집현상으로 나노 점을 형성하였다. 하지층은 Ti, Cr, Co 그리고 상지층은 Ag를 증착하였다. Atomic force microscopy를 통하여 하지층의 물질에 따라 나노 점의 형성 여부가 관찰되었고 형성된 나노 점의 형상이 다르게 나타난 것을 확인하였다. 결과적으로 이중층의 응집현상을 이용하여 나노 점을 제작할 때 가장 적합한 하지층의 물질은 Ti로 확인하였다. 또한 Ti/Ag 시료는 X-ray Diffraction 분광법을 통하여 Ag는 기판으로 사용된 MgO의 (001) 방향을 따라서 에피택셜하게 성장한 것을 확인하였다. We have deposited the bilayer consisted of the underlayer and the overlayer by using DC magnetron sputter on Single crystal MgO (001) substrate. This bilayer was fabricated at fixed annealing temperature and time. We have controlled agglomeration effect by changing of the bilayer thickness. Finally, we have made the self-organization and nano-structured film. In this processing, we have made nano-dot which consists of the underlayer and the overlayer, unlike the existing method called the agglomeration effect in the single layer. The underlayer has deposited using Ti, Cr and Co. And the overlayer has deposited with Ag. Through the analysis of Atomic force microscopy (AFM), the microstructure of underlayer is observed by AFM to confirm the formation of nano-dot. As the nano-dot through above processing, we have found that the nano-dot has the different shape. As a result, when we manufactured nano-dot through the agglomeration effect of bi-layer, the best matching material is Ti for underlayer. And also, we have found that MgO/Ti/Ag samples have been grown expitaxially toward the direction of MgO (001) by X-ray Diffraction analysis.
Hobbing Maching에 의한 Gear Cutting과 Gear의 精度測定
河載晧 충주대학교 1977 한국교통대학교 논문집 Vol.10 No.1
A gear which is to let revolve is the most important of all mechine element. A superior gear is a source of improving the quality and effeciency of a machine. Therefore, I explain its operating principle and method of on accurate gear cutting. And also I mention the accuracy and the measuring method of the gear for the purpose of elevating the quality of manufacturing goods. Thus I will try to make it serve the biginners employed in the factory.
하재호,김남철 동국대학교 사찰조경연구소 1999 寺刹造景硏究 Vol.7 No.-
This study deal with a symbol and a concept of tree, plantscape in all its aspects. Flora of Bilkuk Temple consisted of 102 species, 49 families in woody plants. The purpose of this study is to supply data of the Bulkuk Temple through take a side view of traditional landscape architecture management. The Bulkuksa needs sort out defective trees which is not consider of the traditional templescape, symbol of religion, vegetation of Mt. Toham, and manage of trees which planted without any plan. Especially, The result of this study is what the Bulkuk Temple meet the needs of the times, It carrys out two part ? one is maintain the traditional temple, the other is keep up parked temple and modernized a sightseeing resort.
河載皓 忠州大學校 1980 한국교통대학교 논문집 Vol.13 No.1
Standard gear retains various defects, and especially the improved gear to prevent the especially the improved gear to prevent the under cut is called a profile shifted gear. The profile shifted gear retains the characteristics of a gear according to the selection of the addendum modification coefficent. The addendum modification coeffient is decided at one's option so as to be suitable for the practical condition rather than the theoretical condition. In order to realize the reason I should like to investigate the essence of the addendum modification comparing the specific sliding of the profile shifted gear according to the practical addendum modification coefficient.