http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조원만(Won-Man Cho),김원훈(Won-Hoon Kim),장홍빈(Hong-Been Chang),오종윤(Jong-Yun Oh),이방업(Bang-Eop Lee),이종원(Jong-Won Lee) 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
다중펄스 로켓모타 기술은 일회성 추력발생 방식을 다회성으로 펄스화하여 로켓모타의 보유 에너지를 효율적으로 배분함으로서 유도탄의 사거리 증가와 종말속도를 향상시키므로 기동성과 명중률을 크게 향상시킬 수 있는 첨단기술이다. 본 연구에서는 다중펄스 로켓모타에 적용되는 격벽형 펄스분리장치를 설계하고, 그 시제품을 개발하였다. 펄스 분리장치의 핵심 부품인 격벽과 파열판에 대한 탄·소성 구조 해석을 수행하였다. 제작된 시제품에 대한 구조적 안정성을 확인하기 위한 공압 시험을 실시하였다. 시험 결과를 해석과 비교 분석하였으며, 비교적 일치함을 확인 할 수 있었다. A multiple pulse rocket motor distributes the thrust energy more effectively compared to typical rocket motor as providing subsequent thrusts by the pulse motors of the missile. The pulse rocket motor is the advanced technology to improve an end game capability of the missile by increasing the range and final velocity. A pulse separation device is the core part of the pulse motor. The pulse separation device of bulkhead type was designed and developed. The elastic-plastic structural analysis of the bulkhead and rupture disc was conducted. Several air tests were also conducted to confirm the structural safety and acceptability about the design concept. Test results were compared with the analysis results, which showed reasonable agreements.
조원기(Won Gi Jo),권병혁(Byung Hyuk Kwon),김박사(Park Sa Kim),김민성(Min Seong Kim),윤홍주(Hong Joo Yoon) 한국전자통신학회 2018 한국전자통신학회 논문지 Vol.13 No.2
고정점에서 고도별 바람을 산출할 수 있는 장비인 윈드프로파일러에 의해 관측된 바람 자료는 바람 산출 프로그램인 PCL1300을 활용하여 바람벡터로 제공된다. 현재 프로그램에 설정된 매개변수에 따른 운용의 결과는 3 km 이상 상층 대기 영역의 바람 산출이 어렵다는 것이다. 이는 매개변수에 대한 매우 엄격한 기준으로 인해 다량의 자료가 제거되기 때문이다. 본 연구에서는 바람벡터의 자료 수집 영역을 확장시키고 과소측정을 줄이기 위해 매개변수를 재설정하여 운용 방식을 개선하였다. 바람벡터의 수집률은 72.2%에서 92.2%로 증가하였음에도 풍속의 RMSE는 고도별 오차율 15% 미만에 해당하는 1.5 m/s - 3.1 m/s를 유지하였다. Wind data observed by wind profiler provide wind vectors with the altitudes using PCL1300, wind computation program. As a result of application with parameters set in program currently, it is difficult to compute wind vectors in the upper air over 3 km. This id because a very strict criterion for parameters removes large amounts of data. In this study, therefore, we improve the methods of application by resetting parameters to expand data collection area of wind vectors and reduce underestimation. Although the acquisition rate of the wind vector increased from 72.2% to 92.2%, the RMSE of the wind speed maintained 1.5 m/s - 3.1 m/s, which is less than 15% of the error rate at each altitude.
조원후(W. H. Jo),이성원(S. W. Lee),이찬주(C. J. Lee),김형익(H. I. Kim),류호연(H. Y. Ryu),홍성박(S. P. Hong),이정민(J. M. Lee) 한국소성가공학회 2014 한국소성가공학회 학술대회 논문집 Vol.2014 No.10
In this paper, to evaluate the corrosion properties of sus304 hexagonal bar, several tests were performed such as hardness test, corrosion test, grain size examination. In addition, the same experiments were performed respectively by the following process: Initial material, after heat treatment, after drawing.
조원철(Wonchul Cho),김성민(Sungmin Kim),Purevdorj Nyamsuren,손정우(Jungwoo Sohn),이수홍(Soo-Hong Lee) (사)한국CDE학회 2012 한국CDE학회 논문집 Vol.17 No.2
Use of casting simulation software, analyzing the reason for defect became easy. However, to create a practical solution, experienced casting expert’s knowledge is always indispensable. In this study, we develop casting design automation system and the algorithm based on casting expert’s knowledge, so that faster and more accurate design is enabled. Especially, to generate runner which can be shaped in numerous ways, we suggest the ‘nexus’ method to shape runner system.
조원철(Wonchul Cho),김성민(Sungmin Kim),손정우(Jungwoo Sohn),Nyamsuresn Purevdorj,이수홍(Soo-Hong Lee) (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
Use of casting simulation software, analyzing the reason for defect became easy. However, to create a practical solution, experienced casting expert’s knowledge is always indispensable. In this study, we develop casting design automation system and the algorithm based on casting expert’s knowledge, so that faster and more accurate design is enabled Especially, to generate runner which can be shaped in numerous ways, we suggest the ‘nexus’ method to shape runner system.
UHF 윈드프로파일러 원시 자료의 이중 스펙트럼 첨두 분리
조원기(Won-Gi Jo),권병혁(Byung-Hyuk Kwon),윤홍주(Hong-Joo Yoon) 한국전자통신학회 2019 한국전자통신학회 논문지 Vol.14 No.1
비기상 에코뿐만 아니라 강수와 같은 산란 효과가 큰 기상 에코는 윈드프로파일러 바람 자료의 오류를 유발한다. 강우 상황에서 윈드프로파일러의 도플러 스펙트럼에는 강우 신호와 대기 신호가 모두 첨두로 나타난다. 낙하하는 강우 입자에 의해서 강우 신호의 시선 속도가 매우 크게 나타난다. 강우에 의해 오염된 시선 속도는 수평 바람 벡터의 정확도를 낮추고 부정확한 기상 분석을 초래한다. 본 연구에서는 윈드프로파일러의 원시 데이터를 처리하는 알고리즘을 개발하였고, 강우 환경에서 도플러 스펙트럼에 대한 이중 첨두를 분리하여 강우 신호와 대기 신호를 구분하였다. In addition to non-meteorological echoes, meteorological echoes with large scattering effects, such as precipitation, cause errors in wind data measured by wind profiler. In the rainfall situation, the Doppler spectrum of wind profiler shows both the rainfall signal and the atmospheric signal as two peaks. The vertical radial velocity is very large due to the falling rain drop. The radial velocity contaminated by rainfall decreases the accuracy of the horizontal wind vector and leads to inaccurate weather analysis. In this study, we developed an algorithm to process raw data of wind profiler and distinguished rainfall signal and wind signal by partitioning bimodal peak for Doppler spectrum in rainfall environment.