http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지방 중소도시 도심지역의 거주환경과 거주의식에 관한 연구 - 나주 도심재생을 위한 사례연구 I -
정영덕,조용준,김윤학,Jeong, Young-Deok,Cho, Yong-Joon,Kim, Yun-Hag 한국주거학회 2007 한국주거학회 논문집 Vol.18 No.6
This study examines and analyzes residential environment and consciousness of downtown residents in Naju city and its results are as follows. Naju's population or urban population were decreased by half for 25 years, but area of residential regions was increased twice. It indicates that major parts of increased residence area are occupied by housing site development area. Uses of downtown buildings are for residential building mostly, but commercial building is less than 1/3 and story of buildings is mostly the first floor. So downtown area in Naju has residential function mostly and family composition is over sixties in more than half of population and regional aging is remarkable because household over majority of the population has no family under twenties. Downtown areas showed detached house and their own house in 2/3 of population and residents over majority of population have lived in current house over 20 years and had strong settlement. But housing site area is less than 40 pyeong at 3/2 of population and 2/3 of population have not parking lot. Most of population have dissatisfaction with their residential environment and for solving their dissatisfaction, improvement of poor residential environment, road extension and construction of parking lot are needed most. Most of residents consider that improvement of residential environment or economic level is normal or developed a little compared to five years ago, but when such a dissatisfaction is solved, they continue to live in their area.
고출력 파이버 레이저를 이용한 Cu-Al 이종소재 용접의 용접 특성 분석 및 공정 최적화
정기쁨(K. P. Jeong),이종중(J. J. Lee),정민찬(M. C. Jeong),조용준(Y. J. Cho),박영환(Y. W. Park) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
에너지 절약과 환경 보호에 대한 필요성 증가로 인해 2 차 전지용 배터리의 보급이 빠르게 확산됨에 따라 구리 자체의 용접뿐만 아니라 구리-알루미늄 이종소재 간의 용접에 대한 필요성도 함께 증가하고 있다. 2 차 전지의 용접 품질에 문제가 발생할 경우 화재 발생과 같은 위험을 야기할 수 있어, 최적화를 통한 고품질 용접부를 확보하는 것이 중요하다. 그러나 구리의 용접은 소재의 열전도율이 높아 고밀도 열원이 필요하며 용융 시 산화에 의한 가스 흡수 가능성이 높아서 기공이 형성되기 쉽다는 어려움을 가진다. 또한 구리-알루미늄 이종소재 용접의 경우 두 소재의 물리적 특성 차이가 크고, 용접 후 생성되는 금속간 화합물(Intermetallic Compound, IMC)이 취성화 및 강도 저하를 일으킬 수 있어 용접 가능 공정 범위가 매우 작다고 알려져 있다. 따라서 본 연구는 구리-알루미늄 이종소재의 레이저 용접에 대한 용접 특성 분석 및 공정 최적화를 목적으로 한다. 고출력 파이버 레이저를 이용하여 두께 0.5 t 의 C1100, Al99.5 소재에 대해 용접을 수행한 후, 레이저 출력과 용접 속도 변화에 따른 비드 형상을 관찰하였다. EDS Mapping 을 통해 용융금속의 거동과 금속간 화합물을 관찰하고 그가 용접부 품질에 미치는 영향을 분석하였으며, 2차 전지 관점에서의 품질 신뢰성 획득을 위해 인장 시험을 비롯한 기계적 특성 평가를 수행하였다. Photodiode 와 Spectrometer 를 사용하여 용접부를 모니터링하고, 획득된 신호들 간의 상관관계를 분석한 후 신호 기반 품질 판단을 수행하였다.
지방 소도시 아파트의 특성 및 경관 인식에 관한 연구 - 전라남도 지역을 중심으로 -
김윤학,정영덕,유창균,조용준,정진환,Kim, Yun-Hag,Jeong, Young-Deok,Yoo, Chang-Geun,Cho, Yong-Joon,Jeong, Jin-Hwan 한국주거학회 2007 한국주거학회 논문집 Vol.18 No.1
This study examines and analyzes view hindrance factors of high-storied apartment houses at small town like 'Eup' where county office locates and it is found that hindrance factors include designation of residential area and height, length and form of main building. On recognition of view, most subjects of research considered high-storied apartment houses hindered urban view and its regulation is needed. Apartment houses at small cities become main factors of hindering urban view because they were located randomly regardless of scale of city and surrounding situation, but there is no measure to control it. Accordingly, view control through enaction of regulations is urgently needed with establishment of guidelines such as height of large buildings including high-storied apartment houses, length of main building, location and regulation of exterior design.