http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
드럼 세탁기 Spider의 피로수명 신뢰성 평가에 대한 연구
이성민(Seongmin Lee),조상봉(Sangbong Cho),조성진(Seongjin Jo),김영수(Youngsoo Kim),강동우(Dongwoo Kang),정연수(Younsu Jung),정보선(Bosun Chung) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
The spider of a drum washing machine receives the repeated fatigue loadings during laundering. Although the spider is designed statically safely, it often happens fatigue failure. Therefore it requires the safe design for fatigue and needs the prediction of quantitative fatigue life. The S-N diagram for a spider material is developed by fatigue test and statistical analysis. The stresses are measured directly from strain gages on the spider. To predict the fatigue life of spider, the rainflow counting method and Miner"s rule are used. The data for fatigue life are analyzed statistically. From these data, reliability estimation for fatigue life can be done and also, equivalent fatigue life can be obtained. It will be applied to make and improve to a short period for design and prototype test.
김상원(Sangwon Kim),김정훈(Junghoon Kim),주증민(Jeungmin Joo),이동근(Donggeun Lee),조성진(Seongjin Jo) 한국전자파학회 2021 한국전자파학회논문지 Vol.32 No.9
본 논문에서는 넓은 주파수 범위에 매우 짧은 시간 존재하는 신호에 대해 낮은 샘플링 속도의 ADC를 이용하여 주파수를 측정하는 방식을 제안하였다. 다중 sub-Nyquist 샘플링 채널과 주파수 추정부(estimator)를 사용하는 주파수 측정 구조를 이용해 입력 주파수에 대해 각 채널에서 발생가능한 주파수 측정 모호성 패턴을 설계 시 분석하고, 각 채널에서 측정된 주파수 모호성이 포함된 결과를 처리하여 입력신호의 주파수를 추정한다. 이를 통해 신호 샘플링 속도 대비 수십 배 넓은 주파수 범위의 신호 주파수를 모호성 없이 측정할 수 있으며, 일반적인 DFD에 비해 더 좋은 주파수 측정성능을 잡음환경 시뮬레이션을 통해 보여주었다. This paper proposes an alternative method for measuring the frequency of a short-time signal in a wideband frequency range. A frequency measuring architecture comprising multiple sub-Nyquist sampling channels and a frequency estimator is proposed. The simulation results show that the proposed method has better frequency accuracy, though it uses lower sampling rates than typical DFDs for wideband input frequency range.
김익현(Ikhyun Kim),김문수(MoonSu Kim),함세영(Se-Yeong Hamm),김현구(Hyunkoo Kim),김동수(Dongsoo Kim),조성진(Seongjin Jo),이헌민(Heonmin Lee),황종연(Jongyeon Hwang),조훈제(Hunje Jo),박선화(Sunhwa Park),정현미(Hyenmi Chung) 대한자원환경지질학회 2018 자원환경지질 Vol.51 No.1
인천시 강화도의 지질별(중생대 화강암, 선캠브리아 편마암, 편암) 지하수의 자연방사성 물질과 수리지화학 성분의 특성을 연구하였다. 이 연구를 위하여, 8년 동안 69개 관정에서 지하수 시료를 채수하였다. 통계 분석을 이용하여 지하수의 수리지화학 성분과 자연방사성 물질의 관계를 분석하였다. 연구 지역 지하수의 수질유형은 Ca(Na)-HCO 3 형으로 나타났다. 우라늄은 3 개 지하수 시료에서 US EPA의 MCL(최대 오염 물질 수준)인 30 ug/L을 초과하였다. 라돈은 28개 지하수 시료에서 US EPA의 제안치인 AMCL(대체 최대 오염 물질 수준)인 4,000 pCi/L을 초과하였다. 모든 지하수 시료의 전알파(Gross-alpha)는 US EPA MCL인 15 pCi/L를 초과하지 않았다. 지하수에서의 우라늄과 라돈의 평균농도는 화강암에서 가장 높고, 그 다음으로 편마암, 편암의 순이다. 편암 지역의 라돈은 HCO 3 와 –0.40, 우라늄은 SO 4 과 0.54의 상관계수를 보였고, 편마암 지역의 경우 라돈은 우라늄과 0.55, 우라늄은 SO 4 과 0.41의 상관계수를 보였다. 요인분석에 의하면, 지질별로 각각 다른 거동특성을 가진다. 전체 지하수의 통계 분석 결과, 우라늄과 라돈 그리고 지화학 성분들 간에는 대체로 특이한 상관성을 나타내지 않았다. 자연방사성 물질의 거동과 운명을 보다 명확하게 이해하기 위해서는 자연방사성 물질의 수리지질학적, 지구화학적, 지질학적 특성에 대한 보다 상세한 연구가 요구된다. Groundwaters in different rock types (Mesozoic granite, Precambrian gneiss, and schist) of Ganghwa island, Incheon City were characterized by using naturally occurring radioactive materials (NORM) and hydrogeochemical constituents. For the study, groundwater samples from 69 wells had been collected over eight years. Statistical methods were applied to relate hydrogeochemical components and NORM in the groundwater samples. The groundwater samples belonged to Ca(Na)-HCO 3 types. The uranium concentrations in three groundwater samples exceeded 30 ug/L of United States Environmental Protection Agency (US EPA) maximum contaminant level (MCL). The radon concentrations in 28 groundwater samples exceeded 4,000 pCi/L (picocuries per Liter) of US EPA alternative maximum contaminant level (AMCL). Gross-alpha in all the groundwater samples did not exceed 15 pCi/L of US EPA MCL. The average concentrations of uranium and radon in groundwater were the highest in granite area, and then gneiss, schist areas in order. In schist area, the correlation coefficient (R) between radon and HCO 3 is –0.40 and R between uranium and SO 4 is 0.54. In gneiss area, the R between radon and uranium is 0.55 and the R between uranium and SO 4 is 0.41. According to factor analysis, each geological area shows different chemical characteristics. The statistical analysis of whole groundwater resulted in nearly no significant relationship among uranium, radon and chemical constituents. Subsequently, more detailed studies on hydrogeological, geochemical, and geological characteristics related to NORM are required to better understand the behavior and fate of NORM.