http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정성찬(Jung Sung Chan),김국원(Kim Kug Weon) 한국산학기술학회 2005 한국산학기술학회논문지 Vol.6 No.1
본 연구에서는 절삭 가공시 공구가 받는 절삭력과 칩-공구 사이에서 발생하는 절삭온도에 의한 공구의 변형을 예측 하였다. 3D CAD를 이용하여 공구를 모델링 하였으며 절삭력과 절삭온도를 하중조건으로 부여하여 유한요소해석을 수행하였다. 하중조건으로 사용한 절삭력과 절삭온도는 절삭이론을 이용한 절삭력 모델을 시용하여 예측하였으며 실험을 통해 모델의 타당성을 검증하였다. 그러므로 본 연구는 절삭조건과 재료 물성치 그리고 공구 형상만을 알면 이에 따른 절삭력 성분 및 절삭온도 동을 얻을 수 있고, 이를 이용하여 절삭 가공시 발생하는 공구의 변형을 예측할 수 있다. This study is predicted tool deformation by cutting forces and chip-tool interface temperature in machining process. Modeling of tool is made using 3D CAD software, finite element method is performed by cutting forces and temperature. Cutting forces and temperature used load conditions are predicted using the cutting force model based on machining theory. Experimental milling tests have been conducted to verify the cutting force model. Finally, this study is predicted cutting force components and temperature using cutting conditions, material property, tool geometry without experiment and tool deformation is predicted by cutting forces and temperature in machining process.
절삭이론을 이용한 엔드밀 가공에서의 절삭력 예측에 관한 연구
정성찬(Sung-Chan Jung),김국원(Kug-Weon Kim) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.11
A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.
정성찬(Jung Sung-Chan),신영식(Shin Young-Shik),차인수(Cha In-Su),최정식(Choi Jeong-Sik) 한국태양에너지학회 2009 한국태양에너지학회 학술대회논문집 Vol.- No.-
This article interprets the operating characteristics of the photovoltaic system during the winter and spring seasons, and based on the theoretical knowledge, analyzes the operational characteristics and the power elctricity during the tentative application and operation of this system. Through the long-term measurement of the sunshine time and collection of the data related to this, we examine the study of graphic presentation and monitoring systems.
정성찬(Jung Sung-Chan),김국원(Kim Kug Weon) 한국산학기술학회 2004 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 절삭 가공시 공구가 받는 절삭력과 칩-공구 사이에서 발생하는 절삭 열에 의한 공구의 변형을 예측하였다. 3D CAD를 이용하여 공구를 모델링 하였으며 절삭력과 절삭 열을 하중조건으로 부여하여 유한요소해석을 수행하였다. 하중조건으로 사용한 절삭력과 절삭 열은 절삭이론을 이용한 절삭력 모델을 사용하여 예측하였으며 실험을 통해 모델의 타당성을 검증한 결과이다. 그러므로 본 연구는 어떠한 사전 실험도 없이 절삭조건과 재료 물성치 그리고 공구 형상만을 알면 이에 따른 절삭력 성분 및 절삭열 등을 얻을 수 있고, 이를 이용하여 절삭 가공시 공구의 변형을 예측할 수 있다.
빔 에너지를 이용한 내 마모 및 내 부식성을 갖는 철망 가공 기술
정성찬(Sung-Chan Jung),선경철(Kyung-Chul Sun),신영식(Young-Sik Shin),최정식(Jeong-Sik Choi),차인수(In-Su Cha) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 빔 에너지를 이용하여 내 마모 및 내 부식성을 갖는 철망을 가공하여, 빔 에너지 조사 전과 후의 SEM 사진과 인장강도를 측정하여 비교, 분석 하였다. 전자빔으로 표면을 개질하기 전보다 후의 표면이 더 치밀해짐을 SEM사진을 통하여 볼 수 있었고, 인장강도를 측정 하여 개질 전과 후를 비교 하였는데, 인장강도와 관련된 탄성계수가 더 크게 나타나 전자빔 조사에 의한 샘플이 긴 수명을 갖는 요인이 분석되었다.
정진연(Chung, Jin-Yun),임정빈(Im, Jung-Bin),이성찬(Lee, Sung-Chan) 한국소음진동공학회 2010 한국소음진동공학회 논문집 Vol.20 No.2
The noise by the construction activities is one of the main issues in Korea. To prevent the noise from construction site, construction company installs temporary noise barriers along the construction site boundary. Normally sound insulation performance ($R_w$) of the temporary noise barriers made by metal or plastic is between 18 and 31 dB and metallic noise barriers are around 5 dB higher than plastic noise barriers. Sound absorption performance (NRC) of the temporary noise barriers are between 0.20 and 0.59 so it's difficult to characterize their acoustic performance. In this study, it has founded that sound insulation performance of the temporary noise barrier has been improved about 3dB by stick the high density acoustic sheet and insertion loss of noise barrier is getting increased as the source and receiver approached the temporary noise barriers.
이성찬(Sung Chan Lee),정진연(Jin Yun Chung),임정빈(Jung Bin Im) 한국소음진동공학회 2014 한국소음진동공학회 학술대회논문집 Vol.2014 No.10
There are a lot of different types of noise from construction site and it depends on construction stage, equipment type and number of operating equipments. The problem is almost noise from construction site is high level and some kinds of noise levels are over 100dB. In addition, if construction site is located in downtown, there are a few options to reduce noise level. Therefore several site mitigation plans are developed to reduce different types of construction noises and it is applied in site and evaluated noise reduction performance in this study.
한국형 초도생산제도 도입을 적용한 초도생산품 시험 수량 산출 방안 연구
정성찬,강석중,Jung, Sung-Chan,Kang, Seok-Joong 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.1
본 논문은 미국의 초도생산제도인 LRIP을 우리나라 무기체계 연구개발 획득절차 실정에 맞도록 적용한 한국형 초도생산제도에 대한 연구이다. 초도생산제도는 개발 단계에서 시제품을 대상으로 수행하는 운용시험평가와 양산단계에서 초도생산품을 대상으로 수행하는 야전운용시험을 연속적으로 수행하여 초도생산시험 단계에서 충분히 야전에서의 성능 충족여부를 점검하고, 이후에 안정적으로 후속양산에 진입할 수 있도록 제도개선 방안을 연구하였다. 또한 초도생산 시험수량을 고가의 무기체계 특성을 고려 국방 모델링 시뮬레이션에서 반복횟수를 산출하는 t분포를 이용한 통계학적 이론을 적용하여 시험수량 산출식을 제시하였으며, 향후 국방 획득체계 개선과 안정적 무기체계 연구개발을 위한 최적의 초도생산 시험수량 산출에 대한 연구자료로 활용하고자 한다. This paper aims to benchmark the United States' LRIP, the country's initial production policy, and provide a Korean version of such policy which reflects the circumstances of the country's weapon system research & development(R&D) and acquisition procedures. The research suggests measures to improve the country's initial production policy in a direction that the policy could execute two stage continuously: (1) employment test & evaluation(OT&E), conducted on prototypes during the development stage, and (2) field employment tests(FT), conducted on initial products during the production stage. In addition, the research provides an equation calculating the optimal number of initial test products to be produced, applying statistical theories of t-distribution. The research aims to be used a reference to calculate the optimal number of initial products to be produced for testing in order to improve future national defense acquisition systems and the stable R&D of weapons systems.