딩링(丁玲)의 삶과 문학에 나타난 여성주의 고찰

임태우 한국융합학회 2019 한국융합학회논문지 Vol.10 No.2

China, more than any other countries in the world shared similar ideological system with Korea historically. That is confucian patriarchy, which later combined with socialism and capitalism respectively. Therefore, the hardship that modern chinese women had to go through in the course of great social changes would provide meaningful cross cultural insights in various women issues in Korea. Thus this study attempts to focus on Ding Ling, who is considered to be one of the first women that brought the feminism up in China. One of her early works, <Miss Sophie’s Diary> and <Thoughts on March 8> from Yan’an days were analyzed to mirror current feminist movement. 한국과 중국은 다른 어떤 사회보다도 유사한 문화적 이념체계의 지배하에 놓여있던 사회라고 할 수 있다. 유교적 가부장제가 바로 그것으로 한국은 자본주의, 중국은 사회주의와 결합되면서 생겨나는 문제들을 안고 있다 할 것이다. 이렇게 볼 때 사회주의로 전환되기 전까지 중국여성들의 신여성으로서의 경험은 한국사회에 나타나는 여성문제의 본질을 규명하는데 귀중한 비교 문화적 시각을 제공한다고 볼 수 있다. 이에 본 논문은 1920년대 신문학 운동 시기에 등장한 이래 역사의 주요 시기마다 문학작품을 통해 여성에 대한 선진적 담론을 이끌어냈던 중국의 걸출한 작가이자 여성주의의 대변인이었던 딩링(丁玲)에 주목하고자 한다. 특히 초기 대표작인 <소피여사의 일기(莎菲女士的日記)>와 해방구 옌안에서 발표한 <3.8절 유감(三八節有感)>을 중심으로 격동의 중국 현대사를 관통했던 그녀의 삶과 문학의 변화추이를 고찰함으로서 오늘날의 여성주의를 다시 돌아보고자 한다.

미소 사각 채널에서의 마찰 압력 강하

임태우,최재혁,김준효,최용석,Lim, Tae-Woo,Choi, Jae-Hyuk,Kim, Jun-Hyo,Choi, Yong-Suk 해양환경안전학회 2012 海洋環境安全學會誌 Vol.18 No.5

$500{\mu}m$의 수력직경을 가진 마이크로 채널에서 유동 비등 시 물에 대한 마찰 압력 강하를 측정하기 위한 실험적 연구를 수행하였다. 실험은 열 유속 $100-400kW/m^2$, 증기건도 0-0.2 그리고 질량 유속 $200-600kg/m^2s$의 범위에서 이루어졌다. 유동 비등 시 마찰 압력 강하는 두 가지 모델을 사용하여 예측된다. 즉, 두 상의 속도가 동일하다고 가정한 균질 모델과 두 상 사이에 서로 다른 속도를 가지는 분리류 모델로 분류된다. 실험결과 이상 마찰 승수는 질량 유속이 증가함에 따라 감소한다는 것을 알 수 있었다. 측정된 압력 강하 데이터는 매크로 스케일과 미니/마이크로 스케일에서 제안된 기존의 여러 상관식들과 비교하였다. 균질 모델은 본 연구에서 고려한 실험 조건에서 29.4 %의 평균 오차내에서 마찰 압력 강하를 예측하였다. An experimental study was carried out to measure frictional pressure drop in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to $400kW/m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and $600kg/m^2s$. The frictional pressure drop during flow boiling is predicted by using two models; the homogeneous model that assumes equal phase velocity and the separate flow model that allows a slip velocity between two phases. From the experimental results, it is found that the two phase multiplier decreases with an increase in mass flux. Measured data of pressure drop are compared to a few available correlations proposed for macroscale and mini/microscale. The homogeneous model well predicted frictional pressure drop within MAE of 29.4 % for the test conditions considered in this work.

전후 문학 논쟁사 연구 시론

임태우 空軍士官學校 1994 論文集 Vol.35 No.-

The history of Korean literature has developed into the ideological and aesthetical depth through the literary arguments. This study aims to positively survey the literary arguments which have been made since the Korean War. The post-war literature can be demarcated between the "arguments of tradition"and the "arguments between literature for literature and social commitment". While the former has attempted to establish the cultural identity of Korea, the latter has sought to get the ontological status of literature. These two arguments are distinguished from the previous positions in that the two arguments have been made after the recovery of national identity in 1945, and they have shown the fundamental will to establish the full-scale modern literature.

Direct Fabrication of Nano-Wrinkled 3D Microstructures using Fitfully Accumulated Two-Photon Polymerization

임태우,양동열 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

In this paper, we study the accumulated polymerization effect in the two-photon stereolithography process and its application. In the two-photon stereolithography process, less-polymerized material by insufficient dosing is generally removed by rinse material. The less-polymerized region of a voxel transforms into a fully-polymerized region in the voxel-by-voxel scanning process due to the accumulated dose. The parametric study of the accumulation effect for the widths of a voxel and a line pattern is investigated. Generally, accumulated polymerization from the scanning process has an influence on the increase of the pattern width smoothness of the space between each voxel. At a dose that is smaller than the dose generating a minimum size voxel, stochastic nano-patterns are generated by fitfully accumulated two-photon polymerization. Using the method of fitfully accumulated two-photon polymerization at a small dose, 3D micro-structures with nano-patterns are directly fabricated.

이 가을의 시집 서평

임태우,Im, Tae-U 대한출판문화협회 1993 출판저널 Vol.138 No.-

지난 시대의 고통스런 사회적 상황은 한편으론 우리시를 풍요롭게 했다. 치열한 시정신들이 뿜어댄 언어는 '고통의 축제'라 할만큼 광채로왔다. 그러나 뜨거운 신열이 잦아든 지금, 그 빈자리에 시쓰기의 존재론적인, 매우 본질적인 의문이 자리한다. 올가을에 출간된 시집들에서 우리는 그런 변화의 구체적 조짐과 징후를 읽어낼 수 있다.

약시아동에게 적합한 활자

임태우 단국대학교 사범대학 특수교육과 학생회 1987 특수교육 Vol.4 No.-

수평 전열관내 유동비등하는 순수냉매와 혼합냉매의 열전달 특성에 관한 연구

임태우,한규일 대한설비공학회 2003 설비공학 논문집 Vol.15 No.2

An experimental study was carried out in a uniformly heated horizontal tube to examine heat transfer characteristics of pure refrigerants, R134a and R123, and their mixtures during flow boiling. The flow pattern was also observed through tubular sight glasses with an internal diameter of 10 mm located at the inlet and outlet of the test section. Tests were run at a pressure of 0.6 MPa and in the heat flux ranges of 5~100 kW/$m^2$, vapor Quality 0~100 percent and mass velocity of 150-600 kg/$m^2$s. The observed flow patterns were compared to the flow pattern map of Kattan et al., which predicted well the present data over the entire range of mass velocity employed in this study. Heat transfer coefficients of the mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant.

퍼지제어기와 상태관측기에 의한 도립진자제어

임태우,이종석,최용선,안태천 제어로봇시스템학회 2000 제어로봇시스템학회 국내학술대회 논문집 Vol.1 No.10

R134a 및 Rl23과 비공비 혼합냉매 R134a/R123의 수평관내 이상유동양식에 관한 연구

임태우,김준효,Lim, Tae-Woo,Kim, Jun-Hyo 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.8

Two-phase flow pattern data during horizontal in-tube flow boiling are presented for pure and mixed refrigerants of R134a and Rl23, The flow pattern is observed through tubular sight glasses located at inlet and outlet of the test section, which is made of a stainless steel tube, 2m long with 10mm I.D., 1.5mm wall thickness. The obtained results are compared with the available various correlations for flow pattern. The flow pattern map of Hashizume was in good agreement with the present data except the region of low mass velocity. Weisman flow pattern map was also known to satisfactorily predict data for refrigerants in the region of annular flow. In this study, the flow pattern are simply classified into two groups; stratified(including intermittent, stratified and stratified-wavy) flow and annular flow. The transition quality from stratified to annular flow was obtained by modifying the liquid Froude number.

수평 전열관내 비공비 혼합냉매 R134a/R123의 강제대류비등 열전달에 관한 연구

임태우,한규일,Lim, Tae-Woo,Han, Kyu-Il 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.3

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to mixtures of HFC-l34a and HCFC-123 in a uniformly heated horizontal tube. Tests were run at a pressure of 0.6 MPa and in the ranges of heat flux 1-50 kw/$m^2$, vapor quality 0-100 % and mass velocity 150-600 kg/$m^2$s. Heat transfer coefficients of mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Measured data of heat transfer are compared to a few available correlations proposed for mixtures. The correlation of Jung et. al. satisfactorily predicted the present data, but the data in lower quality was overpredicted and underpredicted the high quality data. The correlation of Kandlikar considerably underpredicted most of the data. and showed the mean deviation of 35.1%.