http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
간섭 및 반향신호 제거를 위한 다단계 구조의 다채널 암묵 디콘볼루션
임정우,정규혁,주기호,김영주,이인성,Lim, Joung-Woo,Jeong, Gyu-Hyeok,Joo, Gi-Ho,Kim, Young-Ju,Lee, In-Sung 대한전자공학회 2007 電子工學會論文誌-SP (Signal processing) Vol.44 No.1
다채널 암묵 디콘볼루션을 자기상관 값이 큰 신호에 적용할 경우 분리필터행렬의 주대각 성분에 의해서 분리신호의 시간백색화가 발생한다. 이러한 왜곡을 줄이기 위해 분리필터 행렬의 주대각 성분을 강제하거나 선형예측 잔여신호를 이용하여 분리필터 행렬을 구하는 방법들이 제안되었지만 신호자신의 반향성분이나 간섭신호 분리에 있어서 문제점이 발생된다. 본 논문에서는 이러한 문제들을 해결하기 위해서 간섭신호의 분리를 위한 단계와 신호자신의 반향을 감소시키기 위한 단계를 분리하여 처리하는 구조의 다채널 암묵 디콘볼루션 방법을 제안한다. 모의실험 결과 혼합신호에서 간섭신호를 분리해낼 수 있을 뿐만아니라 신호 자신의 반향 또한 감소됨을 확인하였다. In case that multichannel blind deconvolution (MBD) applies to signals of which autocorrelation has a high level, separated signals are temporally whitened by diagonal elements of a separation filter matrix. In order to reduce this distortion, the algorithms, which are based on either constraining diagonal elements of a separation filter matrix or estimating a separation filter matrix by using linear prediction residual signals, are presented. Still, some problems are generated in these methods, when we separate reverberation of signals themselves or interference signals from mixed signals. To solve these problems, this paper proposes the multichannel blind deconvolution method which divides processing procedure into the stage to separate interference signals and the stage to eliminate a reverberation of signals themselves. In simulation results, we confirm that the proposed algorithm can solve the problems.
Damping 요소를 첨가한 매칭 퍼슈잇 정현파 모델링
정규혁,김종학,임정우,주기호,이인성,Jeong, Gyu-Hyeok,Kim, Jong-Hark,Lim, Joung-Woo,Joo, Gi-Ho,Lee, In-Sung 대한전자공학회 2007 電子工學會論文誌-SP (Signal processing) Vol.44 No.1
본 논문은 정현파 모델 기반의 코덱을 위한 매칭 퍼슈잇(Matching Pursuit)의 성능을 개선시킨 새로운 정현파 모델링을 제안한다. 제안하는 damping 요소를 첨가한 매칭 퍼슈잇 정현파 모델링은 과거와 현재 프레임에서 파라미터들간의 상관성을 이용하여 damping 요소를 정의하고 현재 프레임에서 보다 정확한 정현파 파라미터를 damping 요소에 따라 매칭 퍼슈잇 방법으로 추출한 후 합성한다. 따라서 인접 프레임과의 보간 없이 현재 프레임에서의 정현파 파라미터만으로 효율적인 모델링이 가능하다. 제안한 모델링 방법은 보간법을 사용한 일반적인 정현파 모델과 달리 추가지연을 가지지 않으면서 유성음 구간 신호뿐만 아니라 모든 구간에서 개선된 음질을 보인다. 제안한 모델링 방법의 성능을 SNR, MOS값, LR(Itakura-Saito likelihood ratio), CD(cepstral distance)를 통해 보간법을 사용한 매칭 퍼슈잇과 비교 평가한다. In this paper, we propose the matching pursuit with damping factors, a new sinusoidal model improving the matching pursuit, for the codecs based on sinusoidal model. The proposed model defines damping factors by using a correlativity of parameters between the current and adjacent frame, and estimates sinusoidal parameters more accurately in analysis frame by using the matching pursuit according to damping factor, and synthesizes the final signal. Then it is possible to model efficiently without interpolation schemes. The proposed sinusoidal model shows a better speech quality without an additional delay than the conventional sinusoidal model with interpolation methods. Through the SNR(signal to noise ratio), the MOS(Mean Opinion Score), LR(Itakura-Saito likelihood ratio), and CD(cepstral distance), we compare the performance of our model with that of matching pursuit using interpolation methods.