http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이호태(Ho Tae Lee),김주만(Joo Man Kim),김병철(Byoung Chul Kim) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.11
This study proposed an electric moxibustion apparatus equipped with a semiconductor chip and charged a built-in battery using a wireless charger, and developed a prototype to measure its efficiency. The features of the moxibustion apparatus prototype with wireless charging are as follows; First, it is made in a compact structure so that it can be easily charged by consisting of a power unit and a main unit. It was revealed that the power transfer efficiency between the two units reached 38%, and that it was generally maintained at a constant value even when the transfer efficiency decreased. Second, a semiconductor is used for the heating element and temperature sensor to heat the acupuncture points. This method has a faster response speed and can control the temperature with high precision without overshooting. As a result of the measurement, it was easy to implement the same temperature characteristics as the conventional moxibustion procedure, and it was possible to program the temperature waveform desired by practitioner.
통계적 실험계획에 의한 폐플라스틱/폐유의 최적 열분해 반응조건 결정
윤왕래,박종수,정헌,이호태,고성혁,김성현,Yoon, Wang-Lai,Park, Jong-Soo,Jung, Heon,Lee, Ho-Tae,Ko, Sung-Hyuk,Kim, Sung-Hyun 한국에너지학회 1999 에너지공학 Vol.8 No.1
범용 열가소성 플라스틱(polyethylene(PE), polypropylene(PP), polystyrene(PS), polyethylene-terephthalate(PET), acrylonitrile-butandiene-styrene(ABS))과 폐윤활유의 동시처리 열분해반응 실험을 수행하였다. 반응실험은 40$m\ell$ 용량의 회분식 미분반응기(microreactor)를 이용한 실험과 1리터 용량의 autoclave를 이용한 실험의 두 가지로 구분하여 행하였다. 전자의 경우는 통계적 실험적계획법(statistical experimental design)의 하나인 회전계획실험(rotatable design experiments)으로서 오각형 실험계획(pentagonal experimental design)에 의거한 반응변수 실험을 수행한 후 반응표면(response surface)을 회기분석법에 의하여 분석함으로써 최대의 오일 수율을 얻을 수 있는 최적 반응조건을 추적, 결정하였다. Autoclave 반응실험의 기본적인 목적은 실제 연속공정에 있어서 열분해 반응기 거동을 모사하기 위한 전초단계로서 충분한 시료의 확보를 통하여 이 때 생성된 연로유의 체계적인 분석(비등점분포특성, 진공증류, 기체분석, 원소분석, 발열량, 비중 등)을 행함으로써 연료유 수율 및 품질을 모사하고자 하였다. 미분반응기 실험에 있어서 주 범용열가소성수지인 PE, PP 그리고 PS는 각각의 최적반응조건하에서 거의 100%에 가깝게 오일로 전환되었지만 응축수지인 PET와 그래프트공중합수지인 ABS의 오일수율은 각기 78% 및 90%로서 상대적으로 낮게 나타났다. Autoclave를 이용한 실험의 경우 혼합플라스틱을 폐유에 대하여 40wt% 혼합하여 열분해하였을 때, 80wt% 오일, 15wt% 코우크, 그리고 나머지 5wt%는 탄화수소기체(C1-C6)로 전환되었다. 진공증류(252$^{\circ}C$,2 torr) 결과, 기/액-분리도는 3으로서 이는 생성오일의 75wt%가 경질연료유(가솔린, 등유, 경유)로 회수 가능하였다.
Fischer-Tropsch 합성반응용 Fe계 촉매의 성능 및 물리화학적 특성에 미치는 SiO2 첨가효과
이관영 ( Kwan Young Lee ),이호태 ( Ho Tae Lee ),정헌 ( Heon Jung ),양정일 ( Jung Il Yang ),김학주 ( Hak Joo Kim ),양정훈 ( Jung Hoon Yang ),천동현 ( Dong Hyun Chun ),현순택 ( Sun Taek Hyun ) 한국화학공학회 2010 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.48 No.3
미립자공학,유동층,고분자,재료 : 무기, 유기 ; 점성슬러리 기포탑에서 작은 기포의 체류량 특성
진해룡 ( Hae Ryong Jin ),송양호 ( Yang Ho Song ),강용 ( Yong Kang ),정헌 ( Heon Jung ),이호태 ( Ho Tae Lee ) 한국화학공학회 2011 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.49 No.1
점성슬러리 기포탑에서 작은 기포의 체류량 특성에 대해 고찰하였다. 정압 강하방법(Static pressure drop method)에 의해 구한 기포탑 내부전체 기포체류량과 이중저항탐침법(dual resistivity probe method)에 의해 구한 큰 기포의 체류량으로부터 기포탑 내부에 체류하는 작은 기포의 체류량을 구할 수 있었다. 기체유속, 연속액상의 점도 그리고 슬러리 상중에 포함된 고체입자의 분율이 전체 기체체류량, 큰 기포의 체류량 그리고 작은 기포의 체류량에 미치는 영향을 검토하였다. 점성슬러리 기포탑에서 작은 기포의 체류량은 기체의 유속이 증가하면 증가하였으나 연속액상의 점도와 슬러리상에 포함된 고체입자의 분율이 증가하면 감소하였다. 기포탑 내부에 체류하는 전체 기포 체류량 중 작은 기포 체류량의 분율은 기체유속이 증가하면 증가하였으나 연속액상의 점도와 슬러리상에 포함된 고체입자의 분율이 증가하면 감소하였다. 기포탑 내부에 체류하는 작은 기포는 큰 기포의 상승속도에 영향을 미치지 못하였다. Holdup characteristics of small bubbles were investigated in a viscous slurry bubble column. The phase holdup of small bubbles was obtained from the knowledge of total bubble{gas) holdup and large bubble holdup, which were measured by mean of static pressure drop method and dual resistivity probe method, respectively. Effects of gas velocity, viscosity of continuous liquid phase and solid fraction in the slurry phase on the small bubble holdup as well as holdups of total bubble{gas) and large bubble in a viscous slurry bubble column. The small bubble holdup increased with increasing gas velocity but decreased with increasing liquid viscosity or solid fraction in the slurry phase. In addition the fraction of small bubble in the total bubble(gas) holdup increased with increasing gas velocity but decreased with increasing liquid viscosity or solid fraction in the slurry phase. It was revealed that the rising velocity of large bubble did not related to the holdup of small bubble in a viscous slurry bubble column.