
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김진석(J. S. Kim),이승현(S. H. LEE),복진욱(J. U. Pok) 한국생산제조학회 2025 한국생산제조학회 학술발표대회 논문집 Vol.2025 No.7
도시 하수구에서 발생하는 악취는 도시 거주자의 삶의 질을 저하시킬 뿐만 아니라, 반복적인 민원 발생의 원인이 된다. 악 취의 주요 원인으로는 하수 내 유기물의 분해로 발생하는 황화수소(H₂ S), 암모니아(NH₃ ) 등 휘발성 화합물, 그리고 하수구 구조의 통풍 불량이 지목된다. 본 연구에서는 물리적 송풍 방식을 기반으로 하수구 악취를 저감하기 위한 장치를 개발하였다. 이 장치는 하수구 내부에 팬을 설치해 지속적으로 외부 공기를 하향 송풍함으로써 악취가 지상으로 확산되는 것을 방지하며, 내부 습도를 낮춰 세균의 번식을 억제하고 주변 온도를 감소시키는 부가 효과도 유도한다. 장치는 팬, 배터리, 배터리 소켓, 팬 보호 커버로 구성되며, 팬을 제외한 모든 부품은 3D 프린팅 기술을 활용해 PLA 소재로 제작하였다. 본 장치는 구조가 단순하고 설치가 용이하다는 장점을 가지며, 실제 하수도 환경을 모사한 조건에서 CFD 해석과 현장 실험을 통해 그 효과를 검증하였다. 분석 결과, 송풍은 내부 공기의 흐름을 제어하며 악취 농도를 효과적으로 감소시키는고,습도 또한 낮아져 세균의 번식을 억제할 수 있는 것으로 나타났다. 향후 시범 사업을 통해 지자체와 협업하여 하수구 통로 입구마다 장치를 설치함으로 써 공공 발전에도 기여하고자 한다.
최혁진(H.J.Choi),오상우(S.W.Oh),이승국(S.G.Lee),김선동(S.D.Kim),이승현(S.H.Lee),이문진(M.J.Lee),변성훈(S.H.Byun),강원수(W.S.Kang),장석(S.Jang) 한국해양환경·에너지학회 2006 한국해양환경·에너지학회 학술대회논문집 Vol.2006 No.-
유조선 경신호는 1988년 포항 대보등대 3.5마일 해상에 침몰하였다. 침몰후 현재까지도 간헐적으로 잔존유가 유출되고 있어 선체내부에 남아 있는 잔존유의 추가 유출에 따른 해양오염사고 발생에 대한 위험성이 재기되고 있다 침몰선체로부터 잔존유 추가 유출 가능성을 조사하기 위해 2006년 5월 무인잠수정과 잔존유 시료채취장치 등 첨단 장비를 이용하여 경신호를 조사한 결과 선체 주변에는 이미 많은 장애물로 덮여 있으며, 잔존유 시료를 채취한 결과 탱크 내부에는 약 300㎘ 이상의 기름이 남아 있는 것으로 분석되었으며, 부식 등의 요인으로 잔존유 유출시 기상상태에 따라 차이는 있으나 1988 사고 당시와 같은 기상상태가 재현된다면 유출된 기름은 포항, 영덕 등 인근 해안가에 부착될 가능성이 있다. The oil tanker, Kyung Shin had sunken in the East Sea, 3.5 mile from Daebo light house of Pohang, Korea in 1988. Because the remained oil of the sunken tanker has been leaking slightly nowadays, it can be a dangerous marine pollutant. For the inspection of additional oil leakage and its possibility, the sunken ship, Kyung Shin was surveyed by using the ROV and oil sampling system in May, 2006. As a result of survey, there are numbers of obstructions on the tanker's body. Based on the survey results and the precedent salvage report, more than 300㎘ oil could be remained by estimation. If same weather condition is reappeared, spilled oil can stick to the coast near Pohang and Yeongdeok.
원 펌프 4 륜 구동 주행 유압 제어 시스템에 대한 동조 특성 해석
이승현(S. H. Lee),김영렬(Y. R. Kim),이양수(Y. S. Lee) 유공압건설기계학회 2019 유공압건설기계학회 학술대회논문집 Vol.2019 No.11
In this study, the synchronized characteristics of the 4 wheel drive travel hydraulic control system for special purpose machinery were analyzed using developed analysis program based on Simulation-X tool. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the pressure compensated control parameter effects on the control charateristics and the pump pressure and load pressure variations were studied. The results and discussions of the present paper could aid in the design of a 4 wheel drive travel hydraulic control system with pressure compensated flow control function
특수목적기계용 압력보상 기능을 갖는 4륜 구동 주행 유압시스템 특성 해석
이승현(S. H. Lee),김동명(D. M. Kim),이용석,김상호,권순동(S. D. Kwon) 유공압건설기계학회 2017 유공압건설기계학회 학술대회논문집 Vol.2017 No.11
In this study, the characteristics of the 4 wheel drive travel hydraulic system for special purpose machinery were analyzed using developed analysis program based on Simulation-X tool. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the pressure compesated cotrol parameter effects on the control chrateristic and the pump pressure and load pressure variations were studied. The results were compared with the experimental ones. The results and discussions of the present paper could aid in the design of a 4 wheel drive travel hydraulic control system whith pressure compensated flow control function