Hamster 수정란(受精卵)의 동결보존(凍結保存) 및 생존성(生存性)에 관한 연구(硏究)

오원진,이규승,김영묵,Oh, Won Jin,Lee, Kyu Seung,Kim, Young Mook 충남대학교 농업과학연구소 1986 Korean Journal of Agricultural Science Vol.13 No.1

본(本) 실험(實驗)은 hamster 수정란(受精卵)의 동결보존시(凍結保存時) 가장 적합(適合)한 동결(凍結)및 융해온도(融解溫度)를 구명(究明)하기 위(爲)하여 실시(實施)하였다. 수정란(受精卵)은 hamster 두당(頭當) 30 IU의 PMSG를 복탈내(腹脫內)에 투여(投與)하고 4일후(日後)에 교미(交尾)를 시켰으며 교미(交尾) 3일후(日後)에 도살(屠殺)하여 자궁(子宮)과 난관(卵管)을 관류(灌流)하여 회수(回收)하였다. 회수(回收)된 수정란(受精卵)의 동결(凍結)에 사용(使用)한 보존액(保存液)은 Dulbecco's phosphate buffered saline(PBS)이었으며, 동해방지제(凍害防止劑)로는 Dimetyl sulfoxide (DMSO)로서 3단계(段階)로 최종농도(最終濃度)가 1.5M이 되게 하였다. 수정란(受精卵)의 동결방법(凍結方法)은 실온(室溫)에서 $-6^{\circ}C$까지 $1^{\circ}C/min$의 속도(速度)로 하강(下降)시켜 수직(水植)하고 3 분간(分間) 방치(放置)시킨 다음 $0.30^{\circ}C/min$ 속도(速度)로 $-35^{\circ}C$까지 냉각(冷却)시켰으며, 다음에 $-70^{\circ}C$까지는 $0.1^{\circ}C/min$, $1^{\circ}C/min$ 및 $10^{\circ}C/min$의 3 처리(處理)로 냉각(冷却)시킨후 $-196^{\circ}C$의 액체질소(液體窒素)에 보존(保存)하였다. 융해(融解)는 $4^{\circ}C/min$과 $12^{\circ}C/min$의 속도(速度)로 $37^{\circ}C$ 까지 가온(加溫)하는 방법(方法)과 $37^{\circ}C$의 water bath에서 2 분간(分間) 침지(沈漬)시키는 방법(方法)을 이용(利用)하였다. 평균배란점(平均排卵點)은 35.1개(個)인데 대하여 회수(回收)된 수정란(受精卵)은 27.0개(個)로서 회수율(回收率) 77.0% 였으며, 수정란(受精卵)중에서 8세포기(細胞期) 배(胚) 24.8개(個)로서 그 비율(比率)은 70.6%였다. 수정란(受精卵)의 동결속도(凍結速度)에 따른 생존율(生存率)은 $0.1^{\circ}C/min$으로 동결(凍結)했을 때 55.5~67.7%, $1^{\circ}C/min$에서는 58.8~64.9%, $10^{\circ}C/min$에서는 40.5~44.7%였는데 $10^{\circ}C/min$의 속도(速度)로 동결(凍結)한 것이 유의(有意)하게 나쁜 성적(成績)이었다. 융해방법(融解方法)에 따른 수정란(受精卵)의 평균생존율(平均生存率)은 $4^{\circ}C/min$에서 53.5%, $12^{\circ}C/min$에서 53.7%, $37^{\circ}C$ water bath 융해(融解)에서 59.1%를 나타내어 water bath 융해(融解)가 가장 좋은 성적(成績)이었으나 큰 차이(差異)는 인정(認定)되지 않았다. 본(本) 실험(實驗)의 결과(結果)를 종합(綜合)해 볼 때 hamster 난자(卵子)의 동결(凍結)에는 실온(室溫)에서 $-6^{\circ}C$까지는 $1^{\circ}C/min$, $-35^{\circ}C$까지 $0.3^{\circ}C/min$, $-70^{\circ}C$까지 $0.1^{\circ}C/min$ 또는 $1^{\circ}C/min$의 동결속도(凍結速度)를 유지(維持)하고, $37^{\circ}C$의 water bath에서 2 분간(分間) 침관(沈漬)하여 융해(融解)하는 것이 가장 높은 생존율(生存率)을 얻었다. This experiment was carried out to determine the optimum freezing and thawing rates of the hamster embryos. The female hamsters were induced to superovulate by intraperitoneal injections of 30 i.u. PMSG and mated with males of the same strain of 4 days the PMSG injection. They were killed and embryos were flushed from the oviduct and uterine horn on 3 days after mating. Embryos were flushed with a modified Dulbecco's phosphate-buffered saline and equilibrated with 1.5 M-dimethylsulphoxide by a 3-step procedure. The freezing rates of the samples were $1^{\circ}C/min$ from room temperature to $-6^{\circ}C$ and the samples were seeded at $-6^{\circ}C$. After being held for 3 min at the seeding temperature, the rates were $0.3^{\circ}C/min$ from $-6^{\circ}C$ to $-35^{\circ}C$. From $-35^{\circ}C$ to $-70^{\circ}C$, the rates were divided into $0.1^{\circ}C/min$, $1^{\circ}C/min$ and $10^{\circ}C/min$, respectively. At $-70^{\circ}C$ the samples were plunged directly into liquid nitrogen. The samples were thawed at $4^{\circ}C/min$ and $12^{\circ}C/min$ from $-196^{\circ}C$ to $37^{\circ}C$, and for 2 min in $37^{\circ}C$ water bath, respectively. The average numbers of ovulation points and embryos recovered were 35.1 and 27.0 appearing 77.0% recovery rates. Eight cell embryos in the embryos recovered were 24.8. The survival rates of embryos according to the freezing rates were 55.5~67.7% at $0.1^{\circ}C/min$, 58.8~64.9% at $1^{\circ}C/min$ and 40.5~44.7% at $10^{\circ}C/min$, respectively. The survival rates at $10^{\circ}C/min$ were significantly low. The survival rates of embryos according to the thawing rates were 53.5% at $4^{\circ}C/min$, 53.7% at $12^{\circ}C/min$ and 59.1% in $37^{\circ}C$ water bath. The survival rates, in $37^{\circ}C$ water bath were slightly higher, but we did not find any differences among them. In conclusion, the best freezing rates of hamster embryos were $1^{\circ}C/min$ from the room temperature to $-6^{\circ}C/min$, $0.3^{\circ}C/min$ from $-6^{\circ}C/min$ to $-35^{\circ}C$ and $-0.1^{\circ}C/min$ or $1^{\circ}C/min$ from $-35^{\circ}C$ to $-70^{\circ}C$. The hamster embryos thawed for 2 min in $37^{\circ}C$ water bath showed the best survival rates.

Hamster 受精卵의 凍結保存 및 生存性에 관한 研究

吳元鎭(Won Jin Oh),李揆丞(Kyu Seung Lee),金榮默(Young Mook Kim) 충남대학교 농업과학연구소 1986 農業技術硏究報告 Vol.13 No.1

배관류 폐기물의 베타선 오염도 측정용 플라스틱 검출기 제작 및 특성평가

김계홍,오원진,이근우,서범경,Kim Gye-Hong,Oh Won-Zin,Lee Kune-Woo,Seo Bum-Kyoung 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.3

The characterization of radiological contamination inside pipes generated during the decommission of a nuclear facility is necessary before pipes can be recycled or disposed. But, existing direct measurements of radioactive contamination level using the survey-meter can not estimate the characteristic of contamination on a local area such as the pipe inside. Moreover, the measurement of surface contamination level using the indirect methods has many problems of an application because of the difficulty of collecting sample and contamination possibility of a worker when collecting sample. In this work, plastic scintillator was simulated by using Monte Carlo simulation method for detection of beta radiation emitted from internal surfaces of small diameter pipe. Simulation results predicted the optimum thickness and geometry of plastic scintillator at which energy absorption for beta radiation was maximized. In addition, the problem of scintillator processing and transferring the detector into the pipe inside was considered when fabricating the plastic detector on the basis of simulation results. The characteristic of detector fabricated was also estimated. As a result, it was confirmed that detector capability was suitable for the measurement of contamination level. Also, the development of a detector for estimating the radiological characteristic of contamination on a local area such as the pipe inside was proven to be feasible.

Hot Cell 내의 고방사능 분진 제거를 위한 사이클론 적용 실험

김계남,이성열,원휘준,정종헌,오원진,Kim Gye Nam,Lee Sung Yeol,Won Hui Jun,Jung Chong Hun,Oh Won Zin 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.1

원자력시설 핫셀 (Hot Cell)내에서 핵종실험 시 발생하는 고방사능 분진(Hot Particulate)의 크기는 0.5300 ${\mu}m$이고 주 핵종은 UO$_2$였다. 핫셀 내의 고방사능 분진을 제거하기 위해 사이클론과 Bag/HEPA필터로 구성된 장치를 고안하였고, 이 장치의 사이클론에 의해 고방사능 분진을 최대로 포집할 수 있는 실험조건을 제시했다. 모의입자의 크기가 클수록 입자의 포집효율은 높았다. 모의 입자의 크기가 5${\mu}m$ 이상일 때, 입자의 포집효율은 $80\%$보다 높았다. 모의 입자의 크기가 1.0 ${\mu}m$ 보다 작을 때, 포집효율은 $70\%$ 보다 작았다. 모의 입자의 유입속도가 12 m/sec보다 클 때, 포집효율은 $70\%$보다 높았다. 그러나 유입속도가 17 m/sec 보다 클 때 포집효율의 증가율은 크지 않았다. 모의입자의 포집효율은 Vortex Finder의 길이가 7.2 cm이하일 때, 길이의 증가와 함께 높아졌지만 7.2 cm 이상일 때는 낮아지기 시작했다. 그러므로 Vortex Finder의 길이가 7.2 cm 일 때, 최대포집효율을 나타냈다. 사이클론 밑에 보조콘 부착 시 모든 속도 범위에서 약 평균 $2\%$ 정도 포집효율이 증가하므로 보조콘 부착효과가 크지 않았다.

금속 시편 형태에 따른 PEC 초음파 제염 성능

원휘준,김계남,정종헌,박진호,오원진,Won Hui-Jun,Kim Gye-Nam,Jung Chung-Hun,Park Jin-Ho,Oh Won-Zin 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.4

Ultrasonic decontamination of the type 304 stainless steel specimen loosely contaminated with $Eu_2O_3$ powders was investigated. Decontamination factors (DFs) by the three kinds of ultrasonic media such as water, pure PFC (Pefluorocarbon, $C_7F_{16}$) and a mixed solution of $99.9\;vol\%\;PFC\;and\;0.1\;vol\%$ anionic surfactant were determined. The determined DF values were 20, 50 and 200, respectively. This significant difference in the decontamination factors for the different decontamination solution was well explained by the surface tension of the media as well as the interaction between the positively charged surface of $Eu_2O_3$ powders and the anionic surfactant. Ultrasonic decontamination behavior of the loosely contaminated metal specimens such as plate, pipe, welding specimen and crevice specimen in the mixed solution of PFC and anionic surfactant was also investigated. The contaminants were completely removed for the tested specimens except for the longest specimen. For 6-cm long pipe specimen, however, $98.5\%$ of the contaminants were removed.

중금속 이온처리와 방사능 폐액 처리를 위한 무기이온교환재 - PAN 복합 Bead 의 제조

김기욱,정경택,설용건,문제권,오원진 ( K . W . Kim,K . T . Jung,Y . G . Shul,J . G . Moon . W . J . Oh ) 한국공업화학회 1997 한국공업화학회 연구논문 초록집 Vol.1997 No.0

PFC제염폐액 내의 미립자 제거를 위한 여과막의 특성 연구

김계남,이성열,원휘준,정종헌,오원진,박진호,Kim Gye-Nam,Lee Sung-Yeol,Won Hui-Jun,Jung Chong-Hun,Oh Won-Zin,Park Jin-Ho 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.2

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered at inside surface of hot cell and surface of equipment in hot cell. It was necessary to develop a particulate filtration equipment to reuse PFC solution used on PFC decontamination due to its high cost and to minimize the volume of second wastewater. Contamination characteristics of hot particulate were investigated and then a filtration process was presented to remove hot particulate in PFC solution generated through PFC decontamination process. The removal efficiency of PVDF(Poly vinylidene fluoride), PP(Polypropylene), Ceramic(Al$_{2}$O$_{3}$ filter showed more than 95$\%$. The removal efficiency of PVDF filter was a little lower than those of other kiters at same pressure(3psi). A ceramic filter showed a higher removal efficiency with other filters, while a little lower flux rate than other filters. Due to inorganic composition, a ceramic filter was highly stable against radio nuclides in comparison with PVDF and PP membrane, which generate H$_{2}$ gas in e-radioactivity atmosphere. Therefore, the adoption of ceramic filter is estimated to be suitable for the real nitration process.

초산완충액에 으한 동전기적 토양복원 효과 증진 연구

김계남(Gye Nam Kim),오원진(Won Zin Oh) 大韓環境工學會 2000 대한환경공학회지 Vol.22 No.11

해체 디지털목업시스템 아키텍쳐 구현

박희성,김성균,이근우,오원진,Park Hee-Seoung,Kim Sung-Kyun,Lee Kune-Woo,Oh Won-Jin 한국방사성폐기물학회 2005 방사성폐기물학회지 Vol.3 No.3

It is necessary to forecast the various dismantling activities prior to dismantling nuclear facilities by using various software instead of a physical mock-up system because the dismantling in a contaminated with radioactivity cause the results of an unexpected situation. The component that needs to develop a dismantling mock-up system was examined. There are many component systems such as a decommissioning database system,3D dosimetric mapping that represents a distribution of a radionuclide contamination, a component of modeling for nuclear facility and devices include the decontamination and decommissioning. The research of software architecture about these components was carried out because these component systems that have been independently doesn't describe not only to visual an activities of Decontamination and Decommissioning(D&D) but also to evaluate it. The result was established an architecture that consist of an visualization module which could be visualized an D&D activities and a simulation module which can be evaluated a dismantling schedule and decommissioning cost.

Hot Cell 내에 오염된 고방사능분진 제거를 위한 사이클론 개발 및 성능평가

김계남,원휘준,최왕규,정종헌,오원진,박진호,Kim Gye-Nam,Won Hui-Jun,Choi Wang-Kyu,Jung Chong-Hun,Oh Won-Zin,Park Jin-Ho 한국방사성폐기물학회 2006 방사성폐기물학회지 Vol.4 No.3

The structural and contamination characteristics of hot cells at KAERI were investigated. The SEM results showed that the size of the hot particulate on the inner surface of the hot cell ranged from 0.2 to $10{\mu}m$. It was found that an inlet flow rate of 15 m/sec was suitable for this developed cyclone with a 49 mm optimum vortex finder length. The results showed that the collection efficiency was about 85% for $3{\mu}m$ particles. The collection efficiency didn't show a sharp increase when the inlet flow rate was faster than 15m/sec. When the temperature of the inlet flow gas was increased, the collection efficiency of the cyclone was slightly decreased. The larger the vortex finder length was, the higher the pressure drop in the cyclone was. The cut size diameter decreased with an increment of the Reynolds number. It was established that the flow in the cyclone was a turbulent flow on the basis of the Reynolds number and this turbulent flow caused a pressure drop in the cyclone. $Stk^{1/2}_{50}$ decreased with increasing values of the Reynolds number and it gradually approached a constant value at a higher value of the Reynolds number Namely, $Stk^{1/2}_{50}$ approached approximately 0.045 between 6000 and 8000 of the Reynolds number.