http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
개선된 charge pump 기반 정전 센싱 회로를 이용한 터치 스크린 패널 드라이버의 혼성모드 회로 분석
여협구,Yeo, Hyeop-Goo 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.2
본 논문에서는 개선된 charge pump 회로를 이용하여 구성한 2-dimensional 터치스크린 패널 드라이버를 소개한다. 개선된 전정 센싱 회로는 charge pump 회로의 중간노드 전하 축적을 제거하여 출력 전압 표류 현상을 효과적으로 없앤다. 터치 패널 드라이버는 터치를 감지하는 아날로그 센싱 부분과 감지된 신호를 처리하는 디지털 신호 처리 부분으로 이루어진다. 제안된 터치스크린 드라이버의 동작을 확인하기 위하여 혼성 모드로 회로를 구성하고 Cadence Spectre를 이용하여 그 동작을 검증하였다. 디지털 회로 부분은 Verilog-A로 모델링하여 아날로그 회로와 인터페이스가 가능하게 하여 전체 회로 동작을 검증함으로써 혼성모드 회로 동작의 신뢰성을 확보하였고 시뮬레이션 시간을 단축할 수 있었다. 시뮬레이션 결과 개선된 전정 센싱 회로를 이용한 제안된 구조의 터치 패널 드라이버의 안정적인 동작을 확인하였다. This paper introduces a 2-dimensional touch screen panel driver based on an improved capacitive sensing circuit. The improved capacitive sensing circuit based on charge pump can eliminate the remaining charges of the intermediate nodes, which may cause output voltage drift. The touch screen panel driver with mixed-mode circuits was built and simulated using Cadence Spectre. Verilog-A models the digital circuits effectively and enables them to interface with analog circuits easily. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver based on the improved capacitive sensing circuit offering no voltage drift.
분산증폭기 기반 GHz 대역 아날로그 FIR 필터 설계
여협구,Yeo, Hyeop-Goo 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.8
This paper introduces analog FIR filters based on a distributed amplifier and analyzes the proposed filter's characteristics. A simple design method of an analog FIR filter based on the digital filter design technique is also introduced. The proposed analog FIR filters are a moving average(MA) and a comb type filters with no multiplier. This simple structures of the proposed filters may enable to operate at multi-GHz frequency range and applicable to combine a filter and an amplifier of RF system. The proposed analog FIR filters were implemented with standard $0.18{\mu}m$ CMOS technology. The designed GHz analog FIR filters are simulated by Cadence Spectre and compared to the results of digital FIR filters obtained from MATLAB simulations. From the simulation results, the characteristics of the proposed analog FIR filters are fairly well matched with those of digital FIR filters. 본 논문에서는 분산증폭기 구조를 기반으로 한 아날로그 FIR 필터 구조를 제안하고 그 특성을 분석한다. 또한, 디지털 필터 설계 기술을 이용한 간단한 아날로그 FIR 필터 설계 방법을 제시한다. 제안된 아날로그 FIR 필터는 이동평균필터와 콤필터 형태로 그 회로 구조안에 곱셈기를 포함하지 않기 때문에 multi-GHz 의 높은 주파수 대역에서도 동작 가능하게 하며, RF 시스템에서 필터와 증폭기를 결합한 형태의 응용이 가능하도록 한 구조이다. 제안된 아날로그 FIR 필터는 표준 $0.18{\mu}m$ CMOS 공정 기술을 이용하여 시뮬레이션을 수행하였고 그 결과를 MATLAB으로 모델링하여 얻은 디지털 필터의 결과와 비교하였다. 시뮬레이션 결과 제안된 아날로그 FIR 필터는 디지털 필터와 의 시뮬레이션 결과에 잘 부합하였다.
배전압 회로를 적용한 변형된 Charge Pump 기반 전압 증배기 설계
여협구,Yeo, Hyeop-Goo 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.8
본 논문에서는 기존의 Dickson's charge pump에 개선된 배전압 회로를 조합하여 구성된 고전압 출력에 용이한 전압 증배기 회로를 소개한다. 기존의 charge pump로 얻어진 전압을 승압에 다시 사용하는 구조로 배전압기를 응용하여 전압 증배를 가속화 하면서도 DMOS의 구조적 신뢰성을 저하하지 않도록 회로 구조를 제안하였다. 제안된전압증배기는 3V 입력 전원의 6단 회로 구성으로 약 33V의 출력을 내며 6단 이상의 구성으로 고전압 증배도 가능하다. 제안된 회로의 성능을 평가하기 위해 Magna DMOS 공정을 이용하여 시뮬레이션 하였으며 이론적인 증배와 일치함을 보였여 최소한의 소자 사용으로 고전압 전압 증배가 가능한 새로운 전압 증배기를 제시하였다. This paper introduces a new DC-DC voltage multiplier using a Dickson's charge pump and a modified voltage doubler. The voltage obtained from a conventional Dickson's chrage pump was reused for accelerating the voltage multiplication and the architecture of the proposed voltage multiplier would not decrease the device reliability of DMOS. The proposed 6-stage voltage multiplier generates about 33V with 3V voltage source. To evaluate the proposed voltage multiplier, simulations were performed with Magna DMOS technology. The simulated voltage multiplication agrees well with a theoretical value, therefore, this paper introduces a new fast voltage multiplier with minimum devices.
DID 기반의 스마트 리모콘과 홈쇼핑 FIDO 거래인증 연구
여협구(Hyupgoo Yeo),강민구(Mingoo Kang),손승일(Seungil Sonh) 한국스마트미디어학회 2020 스마트미디어저널 Vol.9 No.1
In this paper, the FIDO (Fast IDentity Online) transaction certification platform was proposed for applying the DID (Decentralized ID) of blockchain with home shopping channels to the IPTV service providers based on the Remocon (Remote Control). In this case, the DID based smart remocon applies biometric identification techniques for personal identification. These individual DID smart remote controls apply distributed ID blockchain, enabling home shopping viewers to conduct reliable ratings surveys through the detection of channel changed information. In addition, this smart remocon utilizes the product purchased information history on home shopping channels, allowing IPTV s home shopping viewers to compare the same broadcasted production information on all channels by blockchain technique and their production characteristics. IPTV service providers can process home shopping order/authorization informations in one-stop service via a number of home shopping broadcasting companies, and DID smart remote controls for home shopping viewers with the checking results of their real-time online access to confirm the FIDO2.0 transaction certification homepage. Thus, the FIDO transaction authentication platforms of IPTV service provider(Telecommunication company) can be expected to improve the benefits of home shopping customers, and to reduce the broadcasting companies burden of payment, too. 본 논문에서는 블록체인의 분산 ID(DID, Decentralized ID)를 적용하기 위한 생체인증 리모콘(Remote Control, Remocon) 기반의 IPTV 통신사가 다양한 홈 쇼핑 방송사와 연동하는 FIDO(Fast IDentity Online) 거래인증 플랫폼을 제안한다. 이때, DID 기반의 스마트 리모콘은 개인 식별을 위한 생체인식 기법을 적용한다. 이러한 개인별 DID 스마트 리모콘은 분산 ID 블록체인을 적용함으로서, 홈 쇼핑 시청자가 채널 변경정보의 분석을 통해 신뢰성 높은 시청률 조사를 가능하게 한다. 아울러, 스마트 리모콘은 홈쇼핑 채널에서 상품구매 정보이력을 활용함으로서, IPTV의 홈 쇼핑 시청자가 다 채널에서 방송된 동일 상품정보를 블록체인 기법으로 공유 및 제품 특성을 비교할 수 있게 된다. 이로써 홈 쇼핑 시청자가 FIDO2.0 거래인증의 확인을 위한 실시간 온라인 접속결과를 확인함으로서, IPTV 통신사는 다수의 홈 쇼핑 방송사와 시청자용 DID 스마트 리모콘을 통해 홈 쇼핑 주문/결제 정보를 원스톱(One-stop)으로 처리할 수 있다. 또한, IPTV 통신사는 FIDO 거래인증 플랫폼을 통한 홈쇼핑 고객의 편익과 방송사의 결제부담을 경감하는 효과를 기대할 수 있다.