http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
국내 생산 강재를 적용한 강합성 거더 휨저항강도의 통계적 특성
신동구,김천용,노준식,박영석,Shin, Dong Ku,Kim, Chun Yong,Rho, Joon Sik,Park, Young Suk 한국강구조학회 2007 韓國鋼構造學會 論文集 Vol.19 No.2
국내 LRFD 도로교설계규정의 휨에 대한 재료 저항계수 정립 시 기초 통계자료로 활용하기 위하여 국산 강재를 적용한 강합성 플레이트 거더 단면의 정모멘트 및 부모멘트 하 휨저항강도를 통계적으로 분석하였다. 최근 국내에서 생산된 16,000여 표본의 구조용 강재와 철근에 대한 항복강도와 인장강도 등의 기계적 특성을 통계적으로 분석하여, 공칭강도에 대한 편심계수(bias factor)와 변동계수(coefficient of variation)를 구하였다. 이들 국산 강재와 철근을 적용하여 정 부모멘트를 받는 도로교 강합성 플레이트 거더교 대표단면에 대한 재료 비선형 소성해석을 수행하였으며, 해석결과로부터 모멘트-곡률 곡선을 구하고 단면의 휨저항강도를 산정하였다. 공칭휨강도와 극한휨저항강도를 비교하고 대표적 강합성 단면에 대한 편심계수와 변동계수 통계치를 제시하였다. The objective of the present study is to provide statistical resistance statistics for steel-concrete composite plate girder sections under positive and negative moments. Statistical properties on yield strength, tensile strength, elongation, and fracture toughness of domestic structural steel products, gathered from an analysis of over 16,000 samples, were evaluated. Using the steel samples for the plate girder, the bias factor and the coefficient of variation of the ultimate flexural resistance for representative composite plate girder sections under positive and negative flexures were presented. In calculating the ultimate flexural resistance of the composite section, the moment curvature relationships were developed using the incremental load approach considering material nonlinearity for the steel girder. The predicted statistics can be used in the future for the efficient calibration of LRFD code.
LRFD법으로 설계된 단경간 및 연속경간 강합성 플레이트 거더 및 박스 거더의 휨에 대한 신뢰도해석
신동구,노준식,조은영,Shin, Dong Ku,Roh, Joon Sik,Cho, Eun Young 한국강구조학회 2008 韓國鋼構造學會 論文集 Vol.20 No.1
국내 LRFD 도로교설계규정을 정립하기 위한 자료로 활용하기 위하여 단경간 및 3경간 연속 플레이트 거더 및 박스 거더 합성단면을 하중저항계수설계법으로 설계하고 설계된 단면의 휨에 대한 신뢰도해석을 수행하였다. LRFD 법에 의한 합성거더 단면 설계 시에는 최근 국내 통행차량의 특성을 분석하여 새로 제안된 활하중을 적용하였다. 신뢰도해석에서 휨저항강도는 최근 국내에서 생산된 16,000여 구조용 강재 표본의 항복강도 통계적 특성을 반영하여 재료 비선형 소성해석으로 구한 강합성단면의 휨저항강도 통계를 이용하였다. 활하중에 의한 작용모멘트의 편심계수는 1.0~1.2를 적용하였으며 강거더 자중, 콘크리트 바닥판 자중, 포장면 자중 등에 의한 고정하중 모멘트 통계 값은 A SHTO 보정자료를 사용하였다. Rackwitz-Fiessler 법으로 신뢰도해석을 수행하고 지간별, 강거더 형식별, 활하중계수별, 활하중 모멘트의 편심계수별로 신뢰도지수 계산 결과를 제시하였다. The reliability analysis of simply-supported and continuous composite plate girder and box girder bridges under flexure was performed to provide a basic data for the development of LRFD c ode. The bridges were designed based on LRFD specification with newly proposed design live load which was developed by analyzing traffic statistics from highways and local roads. A performance function for flexural failure was expressed as a function of the flexural resistance of composite section and the design moments due to permanent load and live load. For the flexural resistance, the statistical parameters obtained by analyzing over 16,000 domestic structural steel samples were used. Several different values of bias factors for the live load moment from 1.0 to 1.2 were used. Due to the lack of available domestic measured data on the moment by permanent loads, the same statistical properties used in the calibration of ASHTO-LRFD were ap plied. The reliability indices for the composite girder bridges with various span lengths, different live load factors, and bias fact or for the live load were obtained by applying the Rackwitz-Fiessler technique.
신동구(Shin, Dong-Gu),정재운(Jeong, Jae-Woon,),김성수(Sung-Soo),이정배(Lee, Jeong-Bae),박광필(Park, Kwang-Pil) 한국구조물진단유지관리학회 2009 한국구조물진단학회 학술발표회논문집 Vol.2009 No.1
This study deals with the bond strength between the repair material and the substrate according to bonding method and curing condition. From the test results, 28 aged specimens appling none, Acrylic bonding agents and the bonding pin shows high bonding strength in Bonding Pin〉None〉Acrylic bonding agents order in the standard condition but in Bonding Pin〉Acrylic bonding agents 〉none order in the wet condition. each bond strength of 224 aged specimens appeared highly in Bonding Pin〉None〉Acrylic bonding agents order in the standard condition and wet condition.
하중저항계수설계법(LRFD)으로 설계된 강합성 거더의 휨에 대한 신뢰도해석
신동구(Shin Dong-Ku),김천용(Kim Cheon-Yong),백인열(Paik In-Yeol) 대한토목학회 2006 대한토목학회논문집 A Vol.26 No.3A
국내 LRFD 도로교설계규정을 정립하기 위한 기초 자료를 제공하기 위하여 단경간 플레이트 거더 및 박스 거더 합성단면을 하중저항계수설계법으로 설계하고 설계된 단면의 휨에 대한 신뢰도해석을 수행하였다. 신뢰도해석에서 휨저항강도는 최근 국내에서 생산된 16,000여 구조용 강재 표본의 항복강도 통계적 특성이 반영된 강합성단면의 휨저항강도 통계를 이용하였다. 활하중에 의한 작용모멘트 통계는 고정된 값을 사용하지 않고 편심계수 0.95-1.05를, 변동계수는 0.15-0.25로 가정하였다. 강거더 지중, 콘크리트 바닥판 자중, 포장면 자중 등에 의한 고정하중 모멘트 통계 값은 AASHTO 보정자료를 사용하였다. Rackwitz-Fiessler 법으로 신뢰도해석을 수행하고 지간별, 강거더 형식별, 활하중 모멘트의 불확실성 정도별로 신뢰도지수 계산결괴를 제시하였다. The reliability analysis of simply-supported composite plate girder and box girder bridges under positive flexure is performed. The bridges are designed based on the AASHTO-LRFD specification. A performance function for flexural failure is expressed as a function of such random variables as flexural resistance of composite section and design moments due to permanent load and live load. For the flexural resistance, the statistical parameters obtained by analyzing over 16,000 samples of domestic structural steel products are used. Several different values of statistical parameters with the bias factor in the range of 0.95-1.05 and the coefficient of variation in the range of 0.15-0.25 are used for the live-load moment. Due to the lack of avail?able domestic measured data on the dead load moment, the same values of statistical properties used in the calibration of AASHTO-LRFD are applied. The reliability indices for the composite plate girder and box girder bridges with various span lengths are calculated by applying the Rackwitz-Fiessler technique.
열 기계적 하중하 단순 지지된 직사각형 스테인리스 강 평판의 후 좌굴 해석 및 항복거동
신동구(Dong Ku Shin) 한국강구조학회 1995 韓國鋼構造學會誌 Vol.7 No.1
The postbuckling yield behavior of simply supported rectangular stainless steel plates under combined action of uniform thermal load and uniaxial edge compression are investigated. The nonlinear postbuckling analysis is performed by the finite element method based on the first order shear deformable plate theory with the use of von Karman type nonlinear strains. Yielding of plates at thermomechanical postbuckling load range is predicted by von Mises yield criterion. Several numerical examples for plates with various width-to-thickness and aspect ratios are considered. The yield space is defined by normalized axial compression and temperature change. The yield curves that indicate the load carrying capability of plates without yielding are obtained in the yield space defined. From numerical examples considered, it is found that the shapes of yield curves for the plates with the same aspect ratios are very similar between them regardless of the width-to-thickness ratios of plates. It is also observed that slopes of the yield curves are less steeper as the plate aspect ratio increases, implying that a plate with high aspect ratio has greater thermal buckling strength compared with the postbuckling strength under compressive load.
국가과학기술종합정보시스템 구축을 위한 정보기술아키텍처(ITA) 수립 사례 연구
신동구(Shin Dong-Gu),신수미(Shin Su-Mi) 한국콘텐츠학회 2006 한국콘텐츠학회 종합학술대회 논문집 Vol.4 No.2
국가R&D의 투자 효율을 제고할 수 있는 시스템에 대한 요구에 따라 한국과학기술정보연구원(KISTI)의 주관으로 구축 중인 국가과학기술종합정보시스템(NTIS)은 정보화 전략의 일관성 확보와 정보화 투자의 효율성 확대를 위하여 ITA를 수립하여 활용하고 있다. 본 연구에서는 여러 국가연구개발사업 관리 기관을 연계하는 NTIS 구축을 위한 NTIS ITA의 정립절차와 수립된 ITA를 소개하고 ITA 수립의 시사점과 기대효과를 알아본다. The need for a system to promote the effectiveness of national R&D investment has become an important issue. Korea Institute of Science and Technology Information(KISTI) is developing National Science and Technology Information System(NTIS) to meet this need. For the consistency of IT strategy and to promote more effective IT investment the NTIS have been established Information Technology Architecture(ITA). NTIS is the system for coordination outcomes of each R&D centers. This case study's contents are the process of NTIS ITA establishment, the major contents and the effectiveness of NTIS ITA.