http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Self-patterning 기술을 이용한 강유전체 메모리 전극용La<sub>0.5</sub>Sr<sub>0.5</sub>CoO<sub>3</sub>박막의 제조에 관한 연구
손현수,김병호 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.2
Photosensitive sol solution을 이용한 self pattern된 박막은 photoresist/dry etching process에 비해 박막의 제조과정이 간단하다는 장점을 가지고 있다. 이 연구에서는 강유전성 메모리소자의 산화물 전극재료로 사용되고 있는 La$_{0.5}$Sr$_{0.5}$CoO$_3$(LSCO)극 photosensitive sol solution을 이용하여 spin coating법으로 제조하였으며 출발원료는 La-2methoxyethoxide, Sr-ethoxide, Co-2methoxyethoxide를 사용하였다. LSCO gel 박막에 UV 노광시간을 증가시킴에 따라 M(metal)-O-M 결합이 생성되면서 metal $\beta$-diketonate의 UV 흡수 피크 강도는 감소되었고 LSCO gel 박막에 UV조사에 따른 용해도 차이가 생기면서 fine patterning 을 얻을 수 있었다. 68$0^{\circ}C$ 이상의 온도로 대기 중에서 열처리된 LSCO 박막은 perovskite 상을 나타내었고 74$0^{\circ}C$에서 가장 낮은 비저항값(4$\times$10 ̄$^3$Ωcm)을 얻을 수 있었다. Self-patterning of thin films using photosensitive sol solution has advantages such as simple manufacturing process compared to photoresist/dry etching process. In this study,$La_{0.5}SR_{0.5}CoO_3$(LSCO) thin films as an electrode material for ferroelectric memories have been prepared by spin coating method using photosensitive sol solution. La-2methoxyethoxide, Sr-ethoxide, Co-2methoxyethoxide were used as starting materials. As UV exposure time to the LSCO gel thin film increased, the UV absorption peak intensity of metal${beta}$-diketonate decreased due to reduced solubility by M(metal)-O-M bond formation. Solubility difference by UV irradiation on LSCO gel thin film allows to obtain a fine patterning of thin film. The LSCO thin films annealed over$680{\circ}C$ in air showed perovskite phase and the lowest resistivity$(4{ imes}10^{-3}{Omega}cm)$ of the thin films were obtained by annealing at$740{\circ}C$.
당귀(當歸)가 간성상세포의 섬유화 기전 억제에 미치는 영향
손현수,김영철,Son, Hyun-Soo,Kim, Young-Chul 대한한방내과학회 2010 大韓韓方內科學會誌 Vol.31 No.3
Objectives : This study was performed to investigate the anti-fibrogenic effect of Angelica Gigantis Radix on cultured rat hepatic stellate cells. Materials and Methods : Hepatic stellate cells(HSC-T6) were treated with various concentrations of Angelica Gigantis Radix extract for both 24 and 48 hours. The extraction was done either with distilled water or 80% EtOH. After the treatment, cell viability, cell proliferation, procollagen production and the mRNA expression of the ASMA, TIMP1, TIMP2, procollagen Type 1a2, and Cytokine IL-6 production were measured by using MTT assay, BrdU assay, RT-PCR, procollagen Type I C-peptide EIA and IL-6 ELISA assay. Results : The cell viability treated with water extraction was significantly increased, but there were no significant changes treated with 80% EtOH extraction. The cell proliferation treated with water extraction decreased only in the 24 hours group, while there were significant decreases either in the 24 and 48 hours groups treated with 80% EtOH extraction. The mRNA expressions of the ASMA, TIMP2 and procollagen 1a2 decreased in a concentration-dependent manner in the 48 hours group. Procollagen production decreased in a concentration-dependent manner in both the 24 and 48 hours groups. Cytokine IL-6 production increased in a concentration-dependent manner in both the 24 and 48 hours groups. Conclusion : These results suggest that Angelica Gigantis Radix is beneficial in the treatment of cirrhotic patients as well as for patients with chronic hepatitis.
1P-594 BOG 재액화 공정의 동적 모델 개발 및 공정 동특성 연구
손현수,곽동훈,김진국 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
LNG (Liquefied natural gas) 추진용 선박은 환경 친화적라는 장점으로 인해 최근 많은 관심을 받고 있다. 하지만 LNG 저장탱크의 외부 조건에 의해 BOG (Boil-off gas)가 발생하기 때문에 이를 회수하고 활용하기 위한 액화 공정이 수반되어야 한다. 특히, 해상 환경에서는 BOG 재액화 공정에 영향을 줄 수 있는 다양한 요인이 있기 때문에 공정의 안정적인 운전을 위해 강건하고 효과적인 공정 제어 방안 제시가 필요하다. 따라서 본 연구에서는 BOG 재액화 공정의 동적 모델링을 수행하여 공정의 운전 거동을 분석하고 최적의 공정 운전 방안을 제시하는 것을 목표로 한다. 동적 모델링을 기반으로 제어 로직을 구성하여 공정의 운전 목표를 도달할 수 있음을 확인하고 공정 운영 시 예측되는 주요 외란을 분석하여 최적의 운전 가이드라인을 도출하고자 한다. <sup>**</sup>이 논문은 중소기업청의 재원으로 한 WC300 R&D 사업의 지원을 받아 수행된 연구입니다. (과제번호: S2305678)
분산형 전원 인버터의 전류 정보를 이용한 개선된 위상 추정 방법
손현수,김미나,이정효 한국조명.전기설비학회 2022 조명·전기설비학회논문지 Vol.36 No.5
Grid-Code for interconnection are being studied due to problems such as voltage drop in distributed generation connected to the grid, grid protection and power quality in the event of a low voltage accident. For the initial distributed generation, the Grid-code required to cut off electricity within the clear time in the event of a low voltage accident, but as the distributed generation expands, it is being amended to determine the inverter operation method according to the state of grid voltage and accident time. These Grid-code are amended by each country according to the respective country, and among them, Germany's Grid-code require the most stringent standards. In this paper based on the Germany's Grid-code. The existing PLL(Phase Locked Loop) control method has a problem in that it is difficult to accurately estimate the phase due to the very low system voltage in the event of a low voltage accident. To solve this problem, the proposed PLL control method using current information to obtain an accurate phase in the LVRT(Low Voltage Ride Through) situation is verified through simulation and experiment.