http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백승석(Seung Suk Baek),장세정(Se Jung Jang),이종훈(Jong Hoon Lee),고동한(Dong Han Kho),이상훈(Sang Hoon Lee),황석호(Seok Ho Hwang) 한국고분자학회 2014 폴리머 Vol.38 No.2
본 연구는 2-ethylhexyl acrylate와 2-hydroxyethyl acrylate 기본구조에 isobornyl acrylate와 tetrahydrofurfurylacrylate(THFA)의 조성비를 변화시키면서 광중합된 4원 공중합체를 합성한 후 가교제로 1,6-hexanediol diacrylate가혼합된 시럽을 제조하였다. 합성한 시럽에 UV-광원을 조사시켜 점착제를 제조한 후 점착특성과 광학특성을 고찰하였으며 시럽의 기본물성인 고형분, 점도, 및 분자량 분석도 수행하였다. THFA의 함량이 증가할수록 시럽의 분자량은 감소하였으나 고형분은 반대로 증가하였다. 점착제의 박리강도는 THFA의 함량에 따른 반비례관계를 나타내고점착제의 표면에너지는 비례관계를 나타내었다. 또한 모든 점착제에서 92% 이상의 광투과도와 1.0%이하의 haze값,그리고 1.0 이하의 색차계값을 보여주었다. To prepare acrylic pressure sensitive adhesives (PSAs), quaternary copolymer syrups were photopolymerized from 2-ethylhexyl acrylate and 2-hydroxyethyl acrylate as default constituents and isobornyl acrylate and tetrahy-drofurfuryl acrylate (THFA) as variable constituents. After polymerization, 1,6-hexanediol diacrylate and photoinitiator were added and then crosslinked by UV-irradiation to prepare the PSAs. The characteristics of the syrup such as viscosity, molecular weight, and solid content were investigated. As increasing THFA contents, the relationship between molecular weight and solid content of the syrup was reciprocal. Also, the relationship between peel strength and surface energy of the PSAs showed the same tendency. All the PSA samples showed high transmittance (more than 92%), low haze (less than 1.0%) and low color-difference (less than 1.0).
투명 아크릴 기판에 실버그리드(Silver Grid)를 함몰시킨 유연 투명전극 제조
백승석(Seung-Suk Baek),윤대건(Dai Geon Yoon),황경석(Gyungseok Hwang),장수희(Su-Hee Jang),진병두(Byung-Doo Chin),황석호(Seok-Ho Hwang) 한국고분자학회 2017 폴리머 Vol.41 No.3
본 연구에서 광경화성 아크릴 단량체 조성물(methyl methacrylate, 2-hydroxyethyl acrylate, poly(ethylene glycol) diacrylate)을 이용한 고분자 기판 내부에 실버그리드(silver grid)를 잉크젯공정(ink-jet)과 전사공정(transfer process)으로 함몰시킨 유연 투명전극 기판을 제조하였다. 인터페로미터를 사용하여 광경화된 고분자 기판 내부에 실버그리드의 함몰된 형태 및 표면을 확인하였으며, 그것의 광학적 특성과 밴딩테스트 후 전기적 특성으로 제조된 유연 투명전극 기판의 물성을 고찰하였다. 유연 투명전극 기판으로서의 유용성을 확인하기 위해 poly(3-hexylthiophene): [6,6]-phenyl-C61 butyric acid methyl ester(P3HT:PCBM)으로 유기 태양전지 소자를 제작하여 2.52%의 효율 특성을 얻었다. Using the UV-curable acrylate formulations consisting of methyl methacrylate, 2-hydroxyethyl acrylate and poly(ethylene glycol) diacrylate), flexible and transparent electrode embedded silver grid into the polymer substrate was fabricated through ink-jetting technique and transfer process. The profile morphologies and surface characteristics of silver grid in the polymer substrate were estimated by interferometer. Furthermore, the optical properties as well as electrical- resistance changes during bending test of the electrode were also measured. As one of utilitarian applications for the electrode, the optimized organic solar cell was constructed on the electrode by using poly(3-hexylthiophene):[6,6]- phenyl-C61 butyric acid methyl ester (P3HT:PCBM) system and then power conversion efficiency of the device was 2.53%.
가교제 변화에 따른 광학용 아크릴 점착제의 점착물성에 대한 연구
백승석 ( Seung Suk Baek ),장세정 ( Se Jung Jang ),황석호 ( Seok Ho Hwang ) 한국고무학회 2014 엘라스토머 및 콤포지트 Vol.49 No.3
아크릴 단량체인 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA), isobornyl acrylate (IBOA)를 광중합을 통하여 3원 공중합체 시럽을 합성하였다. 이관능기 아크릴 단량체인 1,6-hexanediol diacrylate (HDDA), poly(ethylene glycol) diacrylate (PEGDA, Mn = 250, 575, 700)를 가교제로 사용하여 semi-IPN형 감압성 점착제 (Pressure sensitive adhesives; PSAs)를 UV-광가교 시켜 제조하였다. 가교제 변화에 따른 감압성 점착제의 점착특성, 저장탄성율, 그리고 광학특성을 고찰하였으며, 점착특성과 저장탄성율은 가교제의 화학구조와 분자량에 의존하였다. 광학특성은 모든 감압성 점착제에서 92.5 % 이상의 광투과도 (at 550 nm), 1.0% 이하의 haze값, 0.3 이하의 색차계값을 보임을 확인하였다. 결과적으로 가교제의 종류에 영향을 받지 않음을 확인하였다. Terpolymer syrups were photopolymerized from 2-ethylhexyl acrylate, 2-hydroxylethyl acrylate and isobornyl acrylate to prepare acrylic pressure sensitive adhesives (PSAs). After polymerization, various crosslinkers as 1,6-hexanediol diacrylate (HDDA), poly (ethylene glycol) diacrylate (PEGDA, Mn = 250, 575, and 700) were added and then UV-irradiated to prepare the semi-IPN type PSAs. Their adhesion performance and storage modulus (G`) were strongly dependent on their chemical structure and molecular weight of the crosslinkers. Optical properties such as transmittance (> 92.5 %), haze (< 1.0 %) and color-difference (< 0.3) of PSAs samples were not affected by crosslinker types used in this study.
광학용 아크릴 점착제내 단량체 화학구조에 따른 점착특성
백승석(Seung Suk Baek),장세정(Se Jung Jang),이상원(Sang Won Lee),황석호(Seok Ho Hwang) 한국고분자학회 2014 폴리머 Vol.38 No.5
2-Ethylhexyl acrylate와 2-hydroxyethyl acrylate의 기본구조에 다양한 곁사슬 화학구조를 가지는 단량체의 종류를 변화시키면서 광중합된 고투명 3원 공중합체 시럽을 합성하였다. 시럽에 가교제로 1,6-hexanediol diacrylate와 광개시제를 혼합한 후 UV-광원을 조사시켜 점착제(PSAs)를 제조하여 점착특성과 광학특성을 고찰하였다. PSAs의 점착물성은 단량체 종류에 따른 조성비에 크게 의존하고 있으나, 광학적 특성이 유사함을 확인하였다. 상대적으로 부피가 큰 분자이면서 헤테로 원소를 포함하고 있는 IBOA, THFA, ACMO 단량체가n-BA, VAc, CHA 단량체보다 좋은 점착물성을 보여주었다. To prepare transparent acrylic pressure sensitive adhesives(PSAs), terpolymer syrups were photo polymerized from 2-ethylhexyl acryl ate and 2-hydroxyethyl acrylate with third monomerhaving different chemical structure. After polymerization, 1,6-hexanediol diacrylate as a crosslinker and a photoinitiatorwere added and then UV-irradiated to prepare the PSAs. The adhesion performances and optical characteristics of the PSAs were investigated. Their adhesion performance was dependent on the composition of monomers in the polymer chain but optical properties were maintained at a suitable level. The PSAs prepared by bulky and heteroatom-containing monomers such asI BOA, THFA, and ACMO showed better adhesion performance than others.
박가영,백승석,박준영,Park, Ka-Young,Baek, Seung-Seok,Park, Jun-Young 한국세라믹학회 2014 한국세라믹학회지 Vol.51 No.4
PdO-doped $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZPY) proton conductors have been proposed as applicable for intermediate temperature electrolytes for protonic ceramic fuel cells (PCFCs) because the PdO doping is effective for improving the proton conductivity of $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZY) with high affinity for hydrogen. In order to further improve the conductivity of BZPY, two-phase composite electrolytes consisting of a BZPY and molten carbonate were designed. Dense BZPY-based composite electrolytes were fabricated after sintering at $670^{\circ}C$ for 4 h, since molten carbonates fill the grain boundary of the porous BZPY matrix. Furthermore, BZPY/$(Li-0.5Na)_2CO_3$ composites show a significantly enhanced protonic conductivity at intermediate temperatures. This may be because easy proton transport is possible through the interface of the carbonate and oxide phase.
4,4`-Thiodibenzenethiol을 이용한 광경화형 에폭시 아크릴레이트 합성과 굴절률에 관한 연구
황석호(Seok Ho Hwang),백승석(Seung Suk Baek),이상원(Sang Won Lee) 한국고분자학회 2013 폴리머 Vol.37 No.1
4,4`-Thiodibenzenethiol을 기반으로 이관능 에폭시 수지인 4,4`-thiodibenzenethiol diglycidyl ether를 직접합성 법으로 합성하였다. 합성된 에폭시 수지가 광경화가 가능하도록 acrylic acid와 반응시켜 광경화형 고굴절 이관능 에 폭시 아크릴레이트인 4,4`-thiodibenzenethiol diglycidyl ether diacrylate를 합성하였으며 1H NMR과 FTIR을 이용하 여 화학구조를 확인하였다. 이관능 에폭시 아크릴레이트와 함께 반응성 희석제인 2-phenoxythiol ethyl acrylate를 5, 10, 15, 20, 30 wt% 희석하여 점도와 굴절률과의 상관관계를 확인하였으며 광경화 후 경화필름의 굴절률 변화를 고 찰 하였다. 반응성 희석제의 농도가 증가함에 따라 경화물의 경화도가 낮아졌으며, 경화도가 클수록 경화 후 굴절률 은 높아지는 경향을 확인하였다. UV-curable high refractive index di-functional epoxy acrylate, 4,4`-thiodibenzenethiol diglycidyl ether diacrylate, was synthesized from acrylic acid and 4,4`-thiodibenzenethiol diglycidyl ether that was obtained by reacting 4,4`- thiodibenzenethiol and epichlorohydrin using a direct method (Taffy process). Its chemical structure was identified by 1H NMR and FTIR. After its dilution with a reactive diluent, 2-phenoxythiol ethyl acrylate as 5, 10, 15, 20, and 30 wt% content, the relationship between their viscosity and refractive index was investigated. Their degree of cure decreased with increasing the amount of reactive diluent, and the refractive index of UV-cured film increased with increasing the degree of cure.
급성 췌장염의 진단에 있어서 Urinary Trypsinogen-2 Dipstick 검사의 유용성
황성준 ( Seoung Joon Hwang ),정준표 ( Jun Pyo Chung ),김영균 ( Young Gyun Kim ),송대훈 ( Dae Hoon Song ),이재성 ( Jae Sung Lee ),백승석 ( Seung Seok Baek ),김도연 ( Do Yun Kim ),이덕용 ( Dok Yong Lee ),정연수 ( Yon Soo Jeong ) 대한소화기학회 2004 대한소화기학회지 Vol.43 No.6
Background/Aims: The clinical usefulness of urinary trypsinogen-2 dipstick test is still in controversy. We evaluated the usefulness of urinary trypsinogen-2 dipstick test in patients with acute pancreatitis. Methods: Urinary trypsinogen-2 dipstick test was prospectively performed in 50 patients with acute pancreatitis, 50 patients with non-pancreatic abdominal pain, and 50 healthy controls. Results: On admission, urinary trypsinogen-2 dipstick test was positive in 36 of 50 patients with acute pancreatitis (sensitivity, 72%) and in 4 of 50 patients with non-pancreatic abdominal pain (specificity, 92%). On the other hand, it was all negative in controls. The sensitivity and specificity of serum lipase were 78% and 94%, respectively. At 24 hours after admission, the positive rate of urinary trypsinogen-2 dipstick test rose from 72% to 94% (p=0.02). The results of urinary trypsinogen-2 dipstick test was positive in 14 of 15 patients with severe pancreatitis and 22 of 35 patients with mild pancreatitis according to the criteria by Atlanta International Symposium, 1992. Conclusions: Urinary trypsinogen-2 dipstick test is comparable to serum lipase in diagnosing acute pancreatitis. Delayed measurement and severe pancreatitis are more likely to yield positive results with urinary trypsinogen-2 dipstick test. Thus, we suggest that the cut-off value of urinary trypsinogen-2 dipstick test should be lowered to increase its sensitivity. (Korean J Gastro-enterol 2004;43:364-369)