http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
박홍익(Hong Ik Park),유지수(Ji Soo You),이준영(Jun Young Lee),임홍재(Hong Jae Yim) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.4
This paper presents methods to reduce the deflection of the OLEV. First, the location is found to increase the dynamic stiffness of the OLEV when changing the location of battery. Second, static analysis is conducted to analyze the maximum deflection by battery weight. In order to reduce the amount of deflection, contribution rate of battery supporting structures is analyzed and reinforcements are inserted. Then the static analysis is conducted to compare the results between base model and modified model. Consequently, through the static analysis, both base model and modified model are similarly improved about deflection but modified model is better at reducing the mass than base model.
박홍익(Hong Ik Park),유지수(Ji Sue Yoo),이준영(Jun Young Lee),이상범(Sang Beom Lee),임홍재(Hong Jae Yim) 대한기계학회 2012 大韓機械學會論文集A Vol.36 No.2
이 논문은 배터리의 위치 변화에 따라 발생되는 OLEV의 처짐 개선을 위한 배터리 지지구조물의 설계에 대한 것이다. 배터리의 위치 변화에 따른 OLEV의 동강성을 유한요소해석을 통해 분석하였고, 동강성이 가장 높은 위치를 찾았다. 배터리 하중에 의한 최대 처짐을 정적 해석을 통해 분석하였다. 발생된 처짐을 줄이기 위해서 기본 프레임 부재별 기여도와 보강재 사용 시 보강재의 위치에 따른 기여도에 대한 평가를 수행하였고, 기여도가 높은 기본 프레임과 보강 프레임을 사용한 개선 모델을 선정하였다. 개선 모델을 사용하여 정적 해석을 수행하였고, 기본 모델과의 결과를 비교하였다. 기여도 평가를 통한 개선 및 보강으로 처짐을 목표치 이하가 되도록 하였고, 이 때 개선 모델의 질량이 기본 모델 보다 감소하는 것을 확인할 수 있었다. This paper presents methods to reduce the deflection of the battery-supporting structure on on-line electric vehicles (OLEVs). First, by testing various battery locations, a location is found that increases the dynamic stiffness of the OLEV. Second, static analysis is conducted to analyze the maximum deflection caused by the battery weight. In order to reduce the amount of deflection, the contributions of the battery-supporting structures are analyzed, and reinforcements are inserted. Then, another static analysis is conducted to compare the results of the base model and modified model. Consequently, through the static analysis, both the base model and modified model are similarly improved in terms of deflection, but the modified model is better than the base model at reducing the mass.
측면충돌 안전성 향상을 위한 차체의 점용접 배치 최적설계
박홍익(Hong Ik Park),김규학(Kyu Hak Kim),임홍재(Hong Jae Yim) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.10
In this paper, the topology optimization of spot-weld layout design is performed for improving side impact performance. First, we conduct linear static analysis and nonlinear analysis about simple model to verify the process. Then the topology optimization is performed to find optimal spot-weld layouts. In this study, The volume fractions of spot-weld are used as design constraints, and the densities of each element in the individual design space are used as design variables. The objective function is to minimize the deformation of B-pillar. To confirm the improvement of side impact performance, optimal result of spot-weld layout design is applied in the car body and the side impact analysis is conducted. From the result of the analysis, we confirm the improvement of side impact performance. Finally, we obtained optimized spot-weld layout model.
최상현,김형건,박홍익,전보권,Choi, Sang-Hyun,Kim, Hyung-Gun,Park, Hong-Ik,Chun, Boe-Gwun The Korean Society of Pharmacology 1988 대한약리학잡지 Vol.24 No.2
복잡한 시료-전처리과정을 배제하여 간편하고 선택적이며 예민한 polyamine 측정방법으로써 4-fluoro-3-nitrobenzotrifluoride (FNBT)유도체 및 단일이동상을 이용하는 역상의 고속액체 크로마토 그래피 (HPLC) 방법과 아울러 이 방법을 이용한 흰쥐의 재생성간내 polyamine대사의 변동에 관한 관찰-결과를 요약하면 다음과 같다. 1. 간내-polyamine은 0.4M perchloric acid에 추출한 후 Spragg와 Hutchings의 방법에 따라서 FNBT로 N-2'-nitro-4'-trifluoromethylphenyl polyamine (NTP-polyamine) 유도체를 만들고 이를HPLC로 분석 하였다. 2. HPLC-분석은 ERC ODS-1161 (3 um, $6{\times}100$ mm) column에서 분당 1.2ml 속도의 단일-이동상(acetonitril 80%의 물)으로 분리 하며 파장 242 nm로 검출-정량하였다. 3. HPLC-분석은 시료당 약20분이 소요되었는데, 크로마토그래피의 계치들에 있어서 각polyamine의 capacity factor는 putrescine: 4.12, spermidine: 9.25, 및 spermine: 18.75로써 완전한 분리도를 보였으며, 검량한계는 10 picomole이하의 높은 예민도를 나타내었고, 시료처리-과정의 회수율은 약 12.1-88.5%로써 비교적 안정하였다. 4. Higgins와 Anderson의 방법에 따라서 흰쥐의 간을 부분-절제한 결과 $70.4{\pm}1.99%$가 절제되고 $29.7{\pm}1.45%$가 남게 되었으며, 수술후 48시간 후에 남은 간은 생리식염수-처치군 및 methylglyoxal bis (guanylhydrazone) dihydrochloride (MGBG)-처치군에서 각각 수술 전 간의$52.1%$ 및 $53.3%$로 회복되었다. 5. 정상 간의 polyamine 함량은 각각 putrescine: $158.7{\pm}14.1$, spermidine: $829.7{\pm}36.4$, 및 spermine: $875.6{\pm}42.1$ nanomole/g wet liver이었고 ; 부분-절제하고 남은 간의 polyamine의 수술후변동에 있어서, 생리식염수-처치군의 putrescine과 spermine은 6시간까지의 유의한 증가를 보인다음 48시간에 정상치로 회복되었으나 spermidine은 48시간까지도 계속 증가하여 $2004.9{\pm}170.4nanomole/g$ wet liver가 되었다. MGBG-처치군의 spermidine 및 spermine 함량은 생리식염수군의 변동과 유사하였으나 putrescine의 함량은 6시간의 증가 후 계속 증가하여 48시간에는 $1806.5{\pm}159.4$ nanomole/g wet liver가 되었다. 이상의 성적으로 미루어 볼 때, 위의 단일 이등상의 역상-MPLC방법은 생체의 polyamine 정량분석을 위한 간편하고 예민하며 매우 선택적인 것으로 사료된다. A simple and selective isocratic HPLC method for the analysis of tissue polyamine contents is described and applied on the study of the changes of the hepatic polyamine contents after partial hepatectomy in male rats. The hepatic polyamines are extracted with 0.4 M perchloric acid containing 2 mM disodium EDTA, and then the extract is redissolved in 100 ul of 1 M sodium carbonate and incubated with 300 ul of FNBT-dimethylsulfoxide (1: 100) mixture. The N-2'-nitro-4'-trifluoromethylphenyl drivatives of polyamines are separated through a ERC-ODS column in an isocratic mode with an acetonitrile-water (80:20) mobile phase within 20 min. per a sample, while monitoring the effluent at 242 nm. This improved method which could detect subnanogram of each polyamines is highly specific and reproducible as evidenced by the application of it on the study of the changes of polyamine contents in the regenerating rat liver after partial hepatectomy.