http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
DC, pulse 조건에 따른 구리 도금층 미세 조직 관찰
윤지숙,박찬수,홍순현,이현주,이승준,김양도,Yoon, Jisook,Park, Chansu,Hong, Soonhyun,Lee, Hyunju,Lee, Seungjun,Kim, Yangdo 한국재료학회 2014 한국재료학회지 Vol.24 No.2
The aim of this work was to investigate the effects of electrodeposition conditions on the microstructural characteristics of copper thin films. The microstructure of electroplated Cu films was found to be highly dependent on electrodeposition conditions such as system current and current density, as well as the bath solution itself. The current density significantly changed the preferred orientation of electroplated Cu films in a DC system, while the solution itself had very significant effects on microstructural characteristics in a pulse-reverse pulse current system. In the DC system, polarization at high current above 30 mA, changed the preferred orientation of Cu films from (220) to (111). However, Cu films showed (220) preferred orientation for all ranges of current density in the pulse-reverse pulse current system. The grain size decreased with increasing current density in the DC system while it remained relatively constant in the pulse-reverse pulse current system. The sheet resistance increased with increasing current density in the DC system due to the decreased grain size.
3-Line Buffer Method를 이용한 윤곽선 검출 알고리즘 하드웨어 설계 및 구현
허재영(Jae-young Heo),박찬수(Chansu Park),김세호(Sea-ho Kim),김희석(Hiseok Kim) 한국정보기술학회 2013 Proceedings of KIIT Conference Vol.2013 No.5
스테레오 영상 보정 시스템에는 색상 차, 싱크 차, 회전 차 그리고 쉬프트 차 등 두 카메라 사이에 나타날 수 있는 여러 물리적인 차이를 보정하는 기능이 있다. 보정에 필요한 데이터로써 윤곽선 데이터를 이용하게 된다. 본 논문에서는 윤곽선 데이터를 빠르게 추출하고 저 용량으로 설계하기 위하여 3-Line Buffer Method를 제안한다. 하드웨어 설계 후 기존 윤곽선 추출 알고리즘 결과와 비교 평가 하였다. In stereo correction system, The major operation are correction of disparity of color, synchronization, rotation, and shift between two cameras. Edge data is used as an input source that is necessary data for image correction. In this paper, we have proposed 3-Line Buffer Method to detect edge data and use low size of memory more fast. Experiment results show that proposed algorithm proves more efficient by using low memory size than the previous edge detection algorithms.
440 ㎫급 도금강판의 저항 점 용접 시 AC 및 MFDC전원에 따른 가용전류구간 비교 연구
지창욱(Changwook Ji),박찬수(Chansu Park),김치호(Chiho Kim),조용준(Yongjoon Cho),오동진(Dongjin Oh),김명현(Myung-Hyun Kim),김양도(Yang-Do Kim),박영도(Yeong-Do Park) 대한용접·접합학회 2017 대한용접·접합학회지 Vol.35 No.1
This paper presents a comparative study of the AC and MFDC resistance spot welding process with consideration of sheet thickness. The previous studies have confirmed that there is difference in the optimum welding current and expulsion current with AC and MFDC. The aim of this study was revealing the effect of sheet thickness on weldable current range and expulsion behavior for AC and MFDC welding processes. The optimum welding current of AC was lower (1.6 ㎄) than MFDC welding process in 0.8 mm sheet thickness. Early nugget growth being caused by the peak current of AC developed weld interface deformation, which resulted in suppressing the growth of corona bond and occurrence of low current expulsion. The resistance spot welding for thicker sheet (1.4 ㎜) required lower current of 0.6 ㎄ for the expulsion on the MFDC welding process. The growth of contact diameter (size of corona bond) and button diameter was linear up to the expulsion current with MFDC welding process. Therefore, more attention is required when the AC and MFDC resistance spot welding process is applied for different thickness of steel sheet combination for automotive application.
TBAB를 첨가한 수소 하이드레이트의 분자 동역학 연구
최승호(Choi, Seungho),박찬수(Park, Chansu),김수민(Kim, Soomin),우성민(Woo, Sungmin),신재호(Shin, Jaeho),김양도(Kim, Yangdo) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
가스 하이드레이트는 낮은 온도와 높은 압력에서 물과 천연가스 분자가 물리적으로 안정한 결합을 하고 있는 결정질의 화합물이다. 현재 130개 이상의 가스분자들이 물분자와 결합하여서 Clathrate 하이드레이트를 형성하는 것으로 보고 되어 있다. 수소의 경우 하이드레이트를 형성하기 위해서 약 200MPa 이상의 높은 압력이 필요하다. TBAB는 semi-clathrate 하이드레이트를 형성하는 첨가제로 알려져 있으며 수소 하이드레이트의 형성 압력을 완화시키기 위한 촉진제로서 많은 연구가 수행되고 있다. Wataru Shimada는 XRD 패턴을 사용하여 semi-clathrate 하이드레이트의 특수한 결정 모델을 분석하였다. 이 모델의 경우, 대기압 하에서 TBAB와 물분자의 화학 양론적 비를 1:38로 제시하였다. 이는 처음으로 TBAB 하이드레이트 결정구조를 밝혀냈지만, 분자 동역학적 부문에서는 그 데이터가 정확히 정의 되지 않았다. 본 연구는 Wataru Shimada 모델을 수소 TBAB 하이드레이이트의 분자 동역학 연구에 적용시켰으며, 실험에서 나온 데이터를 바탕으로 RDF(Radial Distribution Function)와 MSD(Mean Square Displacement)를 측정했다.
대형경유자동차에 적용 가능한 복합재생 매연저감장치의 저감특성에 관한 연구
김태화(Taehwa Kim),강정호(Jeonho Kang),박찬수(Chansu Park),이해수(Haesoo Lee),김정곤(Jeonggon Kim) 한국자동차공학회 2013 한국자동차공학회 부문종합 학술대회 Vol.2013 No.5
The goal f this study is comprehend the reduction characteristic of the emission gas about the diesel vehicle in which the service time and displacement is high in comparison with small and medium vehicle in the smoke reducing device attachment. The final examination adhered the smoke reducing device of the complex recycle way to the engine mainly mounted in the heavy-duty diesel vehicle and construction equipment and measured the reduction efficiency of the emission gas. And it examined the adaptability about the heavy-duty diesel vehicle of the complex recycle smoke reducing device through the reduction analyze characteristic. Consequently, when adhering of the complex recycle smoke reducing device, the reduction efficiency of PM was exposed to be satisfied with the waste gas regulation.