http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
핫스탬핑강의 너트 프로젝션 용접시 너트 재질이 용접부 파단모드 변화에 미치는 영향
임성상(Sung-Sang Lim),김영태(Young-Tae Kim),천은준(Eun-Joon Chun),남기성(Ki-Sung Nam),박영환(Young-Wan Park),김재완(Jae-Wan Kim),이선영(Sun-Young Lee),최일동(Il-dong Choi),박영도(Yeong-Do Park) 대한용접·접합학회 2016 대한용접·접합학회지 Vol.34 No.2
The use of materials for modern lightweight auto-bodies is becoming more complex than hitherto assemblies. The high strength materials nowadays frequently used for more specific fields such as the front and rear sub frames, seat belts and seats are mounted to the assembled body structure using bolt joints. It is desirable to use nuts attached to the assembled sheets by projection welding to decrease the number of loose parts which improves the quality. In this study, nut projection welding was carried out between a nut of both boron steel and carbon steel and ultra-high strength hot-stamped steel sheets. Then, the joints were characterized by optical and scanning electron microscope. The mechanical properties of the joints were evaluated by microhardness measurements and pullout tests. An indigenously designed sample fixture set-up was used for the pull-out tests to induce a tensile load in the weld. The fractography analysis revealed the dominant interfacial fracture between boron steel nut weld which is related to the shrinkage cavity and small size fusion zone. A non-interfacial fracture was observed in carbon steel nut weld, the lower hardness of HAZ caused the initiation of failure and allowed the pull-out failure which have higher in tensile strengths and superior weldability. Hence, the fracture load and failure mode characteristics can be considered as an indication of the weldability of materials in nut projection welding.
와이어 방전가공을 이용한 상어 표피 모사 리블렛 표면 제작
박영환(Young Whan Park),김태완(Tae Wan Kim) 한국트라이볼로지학회 2016 한국트라이볼로지학회지 (Tribol. Lubr.) Vol.32 No.6
In this study, we attempt to produce a semi-elliptical riblet with a shark skin-like surface using wire electrical discharge machining (WEDM) and micro molding techniques. Our design for the production of the semi-elliptical mold includes an electrode, a winding roller, and a guide on the WEDM system. A replication mold with negative riblets is machined using WEDM, and a shark skin inspired surface with positive riblets is fabricated using a micro molding technique. For a comparison with the original shark skin, a shark skin replica is also produced using the micro molding technique directly from a shark skin template. Droplet contact angles on a flat surface, the shark skin replica, and the epoxy resin-based micro riblet shark skin-like surface are evaluated. The effect of a Teflon coating on the contact angles for the three different surfaces is also investigated. The results show the micro riblet with a shark skin-like surface has a similar contact angle as the shark skin replica, which means that the simplified riblet shark skin surface strongly influences the performance of wettability. This study confirms the effectiveness of using the WEDM method to prepare hydrophobic surfaces with diverse surface patterns.
국보 제229호 창경궁 자격루 누기 표면에 고착된 오염물 제거 방법 연구
유하림,조하늬,이재성,유지아,박영환,유동완,You, Ha Rim,Jo, Ha Nui,Lee, Jae Sung,Yu, Ji A,Park, Young Hwan,Ryu, Dong Wan 한국문화재보존과학회 2021 보존과학회지 Vol.37 No.2
국보 제229호 창경궁 자격루 누기는 조선시대 과학기술의 정점을 보여주는 과학 문화재로서, 현재는 대·중·소 파수호(播水壺)와 수수호(受水壺)만 남아있다. 2018년부터 약 2년 여간 이루어진 자격루 누기의 전면적인 보존처리 과정에서, 표면에 발생한 오염물을 동정하고 이를 제거하기 위한 실험을 실시하였다. 표면 오염물은 이전 보존처리와 조사 과정에서 사용된 스쿠알란(squalane)과 실리콘 오일(silicone oil)이 환경 요인에 노출되어 발생한 오염물로 확인되었다. 이에 따라 우선적으로 고려할 사항을 설정하여 실험을 진행하였으며, 이를 통해 오염물을 효과적으로 제거할 수 있는 방법을 알아보았다. 우선 유기용제와 습포제를 이용한 실험에서는 톨루엔과 벤토나이트를 적용했을 때 가장 큰 색차 변화폭(𝚫E)을 나타내는 등 뛰어난 반응성이 확인되었다. 그러나 이에 수반되는 유기용제의 유해성과 습포제로 인한 2차 오염 발생 가능성 또한 확인할 수 있었다. 한편 보존처리자의 안전과 작업 환경 및 작업 용이성을 우선적으로 고려한 실험에서는 유기용제에 비해 반응성이 미비하고 비교적 많은 시간과 인력이 요구되었으나, 회차가 거듭될수록 색차 변화폭(𝚫E)의 정도가 유기용제 실험 결과와 동일한 범주 내까지 도달하는 것을 확인하였다. 특히 계면활성제를 활용한 방법이 오염물 제거에 가장 효과적인 것으로 확인되었다. Korea's National Treasure No. 229, the Jagyeongnu (clepsydra) of Changgyeonggung Palace, is a scientific and cultural property representing the pinnacle of science and technology in the Joseon Dynasty. Currently, only the large, mid-sie, and small Pasuhos (bronze jars) remain. During a nearly two-year conservation project by the Cultural Heritage Conservation Science Center (CHCSC) that began in 2018, conservators identified the contaminants on the surface of the water clock's components. It turned out that the contaminants had been caused by the exposure of squalane and silicone oil, used in an earlier preservation treatment, to the elements. The CHCSC conducted experiments to determine the most effective method to remove the contaminants. First, the conservators tried using an organic solvent, a poultice, and the application of toluene and bentonite, which yielded excellent reactivity and significant color difference changes (𝚫E). However, the reactivity was insufficiently effective to warrant the health hazards to the conservators and the environment (toluene is toxic). Although organic solvents required considerably more effort, time, and human resources, the conservators confirmed that their use achieved a true color difference variation (𝚫E) that was within the same range as the toxic hydrocarbon. Thus, they confirmed that using an organic surfactant was the best method for removing the contaminants.
장무연(Mu-Yeon Jang),박영환(Young-Whan Park),김태완(Tae-Wan Kim) 한국기계가공학회 2019 한국기계가공학회지 Vol.18 No.11
Laser processing has been used in various fields. In this study, the feasibility of a hydrophobic surface was investigated through the laser cladding technique. A diode laser was used, and the output was set to 600 –800 W. Seven different specimens were prepared with different cladding widths and spacings, and the contact angles for water droplets were evaluated. As a result, the contact angle of water droplets measured in the direction parallel to the cladding line was higher than that in the vertical direction. The wider the cladding width and the cladding space, the higher the contact angle in the parallel direction. It is thought that when a higher contact angle is formed in the parallel direction, more air can be placed in the valley between the cladding lines. In addition, for the hydrophobic coating effect, the contact angle of the coated cladding surface was increased by about 5–15° as a whole compared to the coated smooth surface. It was confirmed that the wetting characteristics were improved through the cladding.
해양 플랜트 배관용 이종 소재(A105-A312) 및 이종 형상 마찰용접의 용접 특성 분석에 대한 연구
공유식(Yu-Sik Kong),김태완(Tae Wan Kim),곽재섭(Jae Seob Kwak),안용식(Yong Sik Ahn),박영환(Young Whan Park) 한국기계가공학회 2020 한국기계가공학회지 Vol.19 No.3
This paper studies the main parameters of tube-to-bar dissimilar material and shape friction welding for piping materials. The weldability of joint parts was investigated with respect to tensile tests, micro-Vickers hardness, the bond of area, and optical microstructure. The specimens are tested as-welded. Optimal welding conditions are n = 2000 rpm, HP = 50 MPa, UP = 100 MPa, HT = 5 sec, and UT = 10 sec when the metal loss (Mo) is 11 mm. Moreover, the same two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or defects. Therefore, the expected result of dissimilar material friction welding includes a reduction of cost and material in the welding process.