http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태훈,유영훈,김형중,안철민,백효채,이두연,김상진,Kim, Tae-Hun,Yu, Yeong-Hun,Kim, Hyeong-Jung,An, Cheol-Min,Baek, Hyo-Chae,Lee, Du-Yeon,Kim, Sang-Jin 대한영상의학회 2003 대한영상의학회지 Vol.49 No.4
Purpose: To elucidate the sequential radiologic manifestations of reperfusion edema after lung transplantation. Materials and Methods: The study group comprised five consecutive lung transplant recipients (M:F=3:2; mean age; 47.5 years) who between July 1996 and April 2002 underwent lung transplantation procedures (four, unilateral; one, bilateral) at our institution. We retrospectively reviewed the serial postoperative radiographs obtained and characterized the lung infiltrates. Results: Lung infiltrates compatible with reperfusion edema were present in all patients (5/5). Reperfusion edema appeared on day 1 in four, and by day 2 in the other. In all transplanted lungs, infiltrates were found in the perihilar and basilar regions, and were scored as maximal on day 1 in one, day 3 in two, day 4 in one and day 5 in the other. Conclusion: The recognition of sequential radiological manifestations helps identify recognition of reperfusion edema after lung transplantation. 목적: 본 연구는 폐이식후 재관류부종의 시기에 따른 방사선적 소견을 기술하려고 한다. 대상과 방법: 본원에서 폐이식을 시행받은 5명의 수여자를 대상으로 하였다. 1996년 7월부터 2002년 3월까지 세 명의 남자와 두 명의 여자가 폐이식을 받았고, 평균 연령은 47.5세 였다. 이 중 4 명은 한쪽 폐만 이식을 받았고, 1명은 양폐 이식을 받았다. 모든 수술후 연속적인 수술후 방사선 사진을 분석하고, 폐음영을 기술 하였다. 결과: 재관류부종은 네 명에서는 수술후 1일째에 , 한 명에서는 2일째에 나타났다. 최대치의 폐음영은 한 명에서 수술후 1일에, 두 명에서 수술후 3일째에, 한 명에서 4일째에, 나머지 한 명은 술후 5일째에 있었다. 결론: 재관류부종은 모든 폐이식 이후에 일어나는 현상이며 방사선학적으로는 폐문주위와 하폐에 우세하게 분포하는 미세 망상형 또는 기강경화로 나타나며, 약 5일 이내에 최대 시기를 거치고 3주 이내에 특별한 치료없이 소실된다.
생산성 및 비용 분석을 통한 철골 구조체 건설 자동화 시스템의 요구성능 분석
김태훈,이웅균,조훈희,강경인,Kim, Tae-Hoon,Lee, Ung-Kyun,Cho, Hun-Hee,Kang, Kyung-In 대한건축학회 2012 대한건축학회논문집 Vol.28 No.1
Automated building construction systems are currently being employed as an effective alternative for the recent aging of the workforce and the lack of skilled labor. In order to apply such systems effectively in building construction process, the influence on overall construction process by the systems should be examined in the developing phase. Moreover, appropriate performance criteria for the systems should be determined based on the aspect of cost-effectiveness. Therefore, this study analyses performance criteria of an automated building construction system for steel framework by using a simulation technique, CYCLONE, and economic feasibility analysis in order to developing and employing the system efficiently. The study targets the steel girder installation process through a manless steel frame and joint method and bolting robot which is developed by the robot-based construction automation (RCA) group in Korea. The result shows that the manless steel frame and joint method leads substantial productivity improvement for the steel girder installation process by the reduction of loads for resources. In addition, considering productivity and costs of the system on overall process, the maximum permissible capital cost for the bolting robot increases dramatically when a cycle time of the robot ranges from 320 to 440 seconds. The results of this study will help develop cost-efficient system, and serve as a decision support model for appropriate resource inputs of the construction automation method.
스타이렌 공중합체의 물리적 특성 및 콘택트 렌즈로의 응용
김태훈,예기훈,성아영,Kim, Tae-Hun,Ye, Ki-Hun,Sung, A-Young 대한화학회 2009 대한화학회지 Vol.53 No.6
Styrene은 중합체와 공중합체로 널리 사용되어져 왔으며, 고 굴절률을 가지고 있기 때문에 콘택트렌즈 재료로 유용하게 사용된다. 본 연구는 styrene을 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate) 그리고 개시제인 AIBN (azobisisobutyronitrile)을 사용하여 공중합 하였다. 공중합한 안 의료용 재료의 물리적 특성을 측정한 결과 굴절률 1.4412-1.4628, 함수율 20-35%, 가시광선 투과율 82.6-87.0%, 인장강도 0.143-0.344 Kgf를 나타내었다. Styrene의 비율이 증가할수록 굴절률과 인장강도는 증가하였으며, 함수율은 감소하였다. 본 실험결과로 볼 때 생성된 공중합체는 기능성을 가진 고성능 콘택트렌즈 재료로 사용될 수 있을 것으로 판단된다. Styrene is broadly used as a polymer and a copolymer and is useful in manufacturing contact lenses due to its high refractive index. This study used styrene with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Measurement of the physical characteristics of the copolymerized material showed that the refractive index is 1.4412 - 1.4628, water content 20 - 35%, visible transmittance 82.6 - 87% and the tensile strength 0.143 - 0.344 Kgf. Also, measurements showed that the refractive index and tensile strength increased while the water content decreased as the ratio of styrene increased. Based on the results of this study, the produced copolymer can be estimated to be suitable for use as a material for high performance functional contact lenses.
김태훈,한성호,권민정,이승희,Kim, Tae-Hun,Han, Seong-Ho,Gwon, Min-Jeong,Lee, Seung-Hui 대한인간공학회 2006 大韓人間工學會誌 Vol.25 No.2
Window buttons located on a task bar provide information about windows that have been open as well as active. When the number of buttons on the task bar increases, the button size gets smaller and as a result, it is more difficult to identify. This study proposes new alternatives of presenting window buttons to search for a target button efficiently. An experiment was conducted to evaluate the usability of the new. Factors manipulated in the experiment include 'button arrangement methods' and 'order of buttons'. The 'button arrangement methods' factor is composed of three levels, 'one line', 'changeable line', and 'grouping buttons'. The 'order of buttons' factor is composed of three levels, 'fixed order', 'click-right', and 'order control by user'. The results showed that the main effects were significant in search time. In subjective satisfaction, the interaction effect was also significant. The results could be applied to the design of small screens such as PDA or cellular phones.