http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
바깥도파로 입사된 $Ti:LiNbO_3$ 세 도파로 광스위치의 설계 및 제작
김영문,서정훈,허창열,김창민,Kim, Young-Moon,Seo, Jung-Hoon,Huh, Chang-Yul,Kim, Chang-Min 대한전자공학회 1999 電子工學會論文誌, D Vol.d36 No.6
등 간격을 갖는 동일한 구조의 $Ti:LinbO_3$ 세 도파로와 그 위에 CPW 구조 Al 전극을 갖는 광스위치를 설계, 제작, 실험하였다. z-cut $LinbO_3$ 기판상에 $1025^{\circ}C$에서 6시간 동안 Ti 패턴을 확산시킨 세 도파로 방향성 결합기를 제작하였다. TM 모드의 전파 손실을 줄이기 위해 $1.2{\mu}m$ 두께의 $SiO_2$ 박막을 PECVD로 증착시킨 후, 그 위에 광스위칭을 위하여 Al 전극을 형성시켰다. ${\lambda}=1.3{\mu}m$의 입사광에 대해서 거의 완벽한 광 coupling이 두 바깥 도파로 사이에서 일어났다. 새 도파로를 반대칭적으로 detuning 되도록 전계가 가해졌을 때 광 스위칭 현상이 일어남을 확인하였다. An optical switch composed of three-identical, equally-spaced $Ti:LinbO_3$ waveguides and overlaid Al electrodes of CPW structure was designed and fabricated. Patterned Ti was diffused into z-cut $LinbO_3$ substrates at $1025^{\circ}C$ for 6 hours to make a three-waveguide directional coupler. $SiO_2$ buffer layer of $1.2{\mu}m$ was grown by the PECVD to reduce the propagation loss of TM mode, and Al electrodes were built on the layer for switching the guided beam. For an incident beam of ${\lambda}=1.3{\mu}m$, almost perfect optical coupling between two outer waveguides was observed. When an electric field was applied to detune the three waveguides anti-symmetrically, the optical switching phenomenon was successfully confirmed.
김영문(Young-Moon KIM),김건중(Kern-Joong KIM),박철우(Cheol-Woo PARK),양민욱(Min-Uk YANG),이지혜(Ji-Hye LEE),소성민(Sung-Min So),임진혁(Jin-Hyeok IM) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
생활수준의 향상 및 삶의 질에 대한 가치가 변함으로써 80년대 이후부터 전기에너지의 폭발적인 수요로 인해 에너지 절감에 대한 필요성이 증대되고 있다. TV, VTR, 핸드폰 충전기, PC 등 수많은 가전기기들은 하루 내내 전력을 소모하고 있다. 통상적으로 외부의 전원과 연결만 되어있고, 주 기능을 수행하지 아니하거나 외부로부터 켜짐 신호를 기다리는 상태에서 소비되는 전력을 대기전력(standby power)이라고 일컫는다. 대기전력이란 단어를 매스컴을 통해서 많이 들어 보았겠지만 본 논문에서는 대기전력의 정의에 대해서 다시 한 번 규명하고자 한다. 또한 대기전력을 최소화하기 위한 규제방안들을 기술한다.
실험계획법을 이용한 ALBC3에 대한 고속화염용사의 최적 공정 설계
김영문(Kim, Young-Moon),임병철(Lim, Byung-Chul),김민태(Kim, Min-Tae),박상흡(Park, Sang-Heup) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.4
선박의 프로펠러나 임펠러와 같은 유체기기에서는 캐비테이션 현상으로 인해 마모와 침식이 발생한다. 이와 같은 기기손상은 소음과 진동을 발생시켜 기기수명을 단축시키는 문제점을 가지고 있다. 본 연구에서는 캐비테이션 현상에 대한 저항성을 높이기 위해 산업 현장에서 많이 사용되고 있는 고속화염용사코팅의 공정 최적화에 따른 각 요소별 중요도를 분석 하였다. 다구찌 실험계획법을 적용하여 ALBC3 모재 표면에 비정질 분말을 코팅하였고 기공도 실험을 통해 각 요소별 특성 을 분석하였다. 다구찌 실험계획법에 의해 고속 화염용사(HVOF) 코팅의 최적 공정을 찾아낸 결과 연소압이 80 psi, 코팅 거리가 270 mm, 이송속도가 200 mm/s, 분말속도는 25 g/min으로 확인되었고, 그 결과, 연소압, 코팅거리 및 분말속도는 25% 이상으로 비슷한 기여도를 나타냈고 이송속도는 19%로 다소 떨어지는 수준을 나타내었다. 공정에 대한 각 인자별 기여도는 약간의 차이는 있지만 그 차이가 크지 않으므로 네 개의 인자 모두 고속 화염용사(HVOF) 코팅 공정에서 중요한 기여를 하였다. Erosion and abrasion caused by cavitation damage occur in fluid equipment, such as ships or impellers. Similarly, the equipment damage from noise and vibration can shorten its life. This study analyzed the importance of the parameter characteristics of the process optimization of HVOF (High Velocity Oxygen Fuel spraying), which is generally used in a variety of industries for enhancing the resistibility from the cavitation phenomenon. The surface of the ALBC3 substrate was coated with an amorphous powder as a filler metal according to the experimental design using the Taguchi method, and then the characteristics with each parameter were analyzed using a porosity measurement test. The optimal process conditions was a combustion pressure of 80psi, coating distance of 270mm, gun speed of 200mm/s, and powder feed rate of 25g/min as a result of the HVOF coating by applying the experimental design. The combustion pressure, coating distance and powder feed rate were more than 25% and indicated a similar contribution rate, but the contribution rate of the gun speed was 19%, which was slightly less than the others. The contribution rate with each parameter was only slightly significant. On the other hand, all four parameters were found to be important in the contribution rate aspects of the HVOF coating process.
폐쇄성 황달을 동반한 악성 및 양성 췌담도 질환에서 CA 19-9 상승의 임상적 해석
김민성 ( Min Seong Kim ),전태주 ( Tae Joo Jeon ),박지영 ( Ji Young Park ),최정민 ( Jeongmin Choi ),신원창 ( Won Chang Shin ),박성은 ( Seong Eun Park ),서지영 ( Ji-young Seo ),김영문 ( Young Moon Kim ) 대한소화기학회 2017 대한소화기학회지 Vol.70 No.2
Background/Aims: Elevated carbohydrate antigen (CA) 19-9 level may be unable to differentiate between benign and malignant pancreatobiliary disease with obstructive jaundice. The study aims to determine the clinical interpretation and the diagnostic value of CA 19-9 level in pancreatobiliary diseases with coexistent obstructive jaundice. Methods: We retrospectively reviewed the data of 981 patients who underwent biliary drainage due to obstructive jaundice following pancreatobiliary disease at Sanggye Paik Hospital for 5 years. 114 patients with serial follow-up data for CA 19-9 level were included in this study (80 patients with malignancy and 34 patients with benign diseases). We compared the levels of CA 19-9 levels and the biochemical value before and after biliary drainage. Results: The rate of CA 19-9 elevation (>37 U/mL) was significantly different between the benign group and the malignant group (59% vs. 90%, p=0.001). Despite the decrease in serum bilirubin after biliary drainage, CA 19-9 levels remained elevated in 12% of patients in the benign group and in 63% of patients in the malignant group (p<0.001). Finally, 12% of patients in the benign group turned out to have malignant disease. A receiver operating characteristic analysis provided a cut-off value of 38 U/mL for differentiating benign disease from malignant disease after biliary drainage (area under curve, 0.787; 95% confidence interval, 0.703 to 0.871; sensitivity, 62%; specificity, 88%). Conclusions: This study suggested that we should consider the possibility of malignant causes if the CA 19-9 levels remain high or are more than 38 U/mL after resolution of biliary obstruction. (Korean J Gastroenterol 2017;70:96-102)
변종민,김세훈,김진우,김영문,김영도,Byun, Jong-Min,Kim, Se-Hoon,Kim, Jin-Woo,Kim, Young-Moon,Kim, Young-Do 한국분말야금학회 2011 한국분말재료학회지 (KPMI) Vol.18 No.4
In this study, gradient porous Al-Cu sintered body was fabricated by powder metallurgy processing. Al-Cu powder mixtures were prepared by low energy ball milling with various milling time. After ball milling for 3h, the shape of powder mixtures changed to spherical type with size of 100~500 ${\mu}m$. Subsequently, Al-Cu powder mixtures were classified (under 150, 150~300 and over 300 ${\mu}m$) and compacted (20, 50 and 100 MPa). Then, they were sintered at $600^{\circ}C$ for various holding time (10, 30, 60 and 120 min) in $N_2$ atmosphere. The sintered bodies had 32~45% of porosity. As a result, the optimum holding time was determined to be 60 min at $600^{\circ}C$ and sintered bodies with various porosity were obtained by controlling the compacting pressure.
창업보육기업 및 대표자의 특성이 보육성과에 미치는 영향에 관한 연구
김영문(Kim, Young-moon),차재민(Cha, Jae-Min) 계명대학교 산학연구소 2009 經營經濟 Vol.42 No.1
This paper studies the relation with the specific qualities of the companies that are in 269 Business Incubator Centers in nationwide and the nurtured-business effects from analyzing the characters of CEOs. By investigating 540 companies that arc involved in each Business Incubator Centers, the results were found the different nurtured-business effects depends on specific qualities of the companies-type of business and venture or not, and the characters of CEOs-the age and occupation when CEO found it, final degree and major.