http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김학은(H. E. Kim),이현섭(H. S. Lee),권수종(S. J. Gwon),박재필(J. P. Park),최병근(B. K. Choi),정용길(Y. G. Jung) 한국동력기계공학회 2004 한국동력기계공학회 학술대회 논문집 Vol.- No.-
Liquefied Natural Gas takes up six hundredths of the volume of natural gas, which makes storage and transportation much easier. To send out natural gas via a pipeline network across the nation, high-pressure LNG pumps supply highly compressed LNG to high-pressure vaporization facilities. The Number of high-pressure LNG pumps determined the send-out amount in LNG receiving terminal. So it is main equipment at LNG production process and should be maintained on best conditions. In this paper, to find out the cause of high beat vibration at cryogenic pumps, vibration and motor current analysis have been performed. And high beat vibration of cryogenic pumps could be reduced due to the modification of motor rotor.
유압프레스 압력제어시스템의 비례압력제어밸브 동특성 해석
권수종(S. J. Kuen),이현섭(H. S. Lee),김학은(H. E. Kim),박재필(J. P. Park),최병근(B. K. Choi),정용길(Y. G. Jung) 한국동력기계공학회 2004 한국동력기계공학회 학술대회 논문집 Vol.- No.-
In case which uses the past hydraulic system comes to be complicated and expense when various control speed and pressure. The control location is fixed with on/off operation of the solenoid and the switching which the valve is makes sudden surge pressure and becomes the cause of damage, sound, temperature rises and the viscosity changes. It solves a problem use proportional control valve and it will be able to remove the surge pressure and knocking state which removes the change of sudden speed and direction. In this paper, it understood the characteristic and a construction proportional control pressure relief valve by AMESim, and it has been confirmed the useful for hydraulic press simulation modeling by comparison of simulation result and actual result from experiments.
합성곱 신경망 알고리즘을 활용한 베어링 다중 고장 진단 모델 개발
이상원(S. W. Lee),이창호(C. H. Lee),김진우(J. W. Kim),김수종(S. J. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
회전 기계에서 베어링은 전체 기계시스템의 구동 및 제어에 핵심적인 역할을 하므로 장비의 안전하고 지속적인 작동을 위해서는 베어링의 유지 보수 및 상태 모니터링이 필수적이다. 본 연구에서는 베어링의 예상치 못한 파손으로 인한 기계시스템의 손상에 대비하기 위해, 대표적인 딥러닝 알고리즘인 Convolutional Neural Networks (CNN)을 활용한 베어링의 고장 상태 및 고장 종류 진단 모델을 개발하였다. 베어링 시뮬레이터를 사용하여, 정상 및 고장 상태의 베어링의 회전운동을 구현하였으며, 각 베어링 상태에서의 신호 데이터는 2 개의 가속도 센서를 X, Y 축에 고정시켜 수집하였다. 고장 상태는 4 종류로 볼, 케이지, 외륜, 내륜 고장을 부품에 모사하였으며, 정상 및 고장 상태의 데이터 세트는 각각 500 개씩 수집하였다. 베어링 상태의 시계열 데이터 신호는 Short Time Fourier Transform (STFT) 기법으로 전처리 하였고 두 단계의 CNN 알고리즘을 활용하여 진단 모델을 개발하였다. 첫 번째 단계에서는 정상 및 고장 상태를 분류할 수 있는 모델로 설계하였고 두 번째 단계에서는 고상 상태로 분류된 데이터 세트에 대해서 4가지의 고장 종류를 분류할 수 있는 모델로 설계하였다. 각 단계에서 사용된 CNN 알고리즘 설계는 동일하며, K-fold Cross Validation 을 통해 개발된 모델에 대한 검증을 수행하였다.
전자제어식 리버스 연속가변댐퍼용 파일럿밸브의 동특성 해석
박재필(J. P. Park),이현섭(H. S. Lee),김학은(H. E. Kim),권수종(S. J. Kuen),최병근(B. K. Choi),정용길(Y. G. Jung) 한국동력기계공학회 2004 한국동력기계공학회 학술대회 논문집 Vol.- No.-
Since semi-active suspension systems of automobile, of which suspension damper are controlled actively, exhibit high performance with light system weight, low cost and low energy consumption. From this view point, semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspension systems. In this paper, mathematical modeling and dynamic characteristics analysis of a reverse continuously variable damper and pilot valve used for semi-active suspension systems are investigated. The mathematical model of piston with valve are proposed by IMAGINE/AMESim in the paper. To verify the mathematical model developed, the dynamic characteristics are simulated by AMESim and are compared with experimental results. It was confirmed that the developed models represent well the actual system and can be used for control system design.
김공수,맹학영,김수종 ( K . S . Kim,H . Y . Maeng,S . J . Kim ) 충북대학교 산업과학기술연구소 1994 산업과학기술연구 논문집 Vol.8 No.2
Abstract_Roman Chitosan-g-poly(AA) and chitosan-g-poly(4 VP) was prepared by graft copolymerization of acr- ylic acid(AA) and 4 vinyl pyridine(4-VP) onto chitosan using ceric ammonium nitrate(CAN). Preparation of composite membrane of grafted chitosan
NR/MG Latex 블랜드필름의 제조 및 그의 기계적특성
김공수,박준하,엄주송,김수종 한국고무학회 1994 엘라스토머 및 콤포지트 Vol.29 No.1
Methylmetharylate grafted latex(MGL) was prepared by emulsion graft copolymerization of methyl methacrylate onto natural rubber latex(NRL) by using t-butyl hydroperoxide and tetraethylene pentamine in an aqueous medium. Blending of MGL and NRL with different mixing ratio carried out and viscosity and particle size distribution of blend latex were determined. It was found that the optimum condition of mature time, vulcanizing temperature and time for preparation of blend latex films were investigated. latex films prepared by dipping process were meaured. As the result, blend latex(NR-d-MG) films obtained from two-dipping system were more excellent than NR and MG film obtained from one-dipping system.