http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김명준,장현선,김동기,김병옥,Kim, Myung-Jun,Jang, Hyun-Seon,Kim, Dong-Kie,Kim, Byung-Ock The Korean Academy of Periodontoloy 2005 Journal of Periodontal & Implant Science Vol.35 No.2
수직 치근파절은 특이성을 나타내지 않기 때문에 치과의사가 정확한 진단을 하기 어렵다. 따라서 수직 치근파절의 임상적 특징, 진단적 증상을 파악하여 향후 근관치료된 치아나 치료되지 않은 치아에서 수직 치근파절의 유발인자와의 관련성 및 고찰을 통해 수직 치근파절의 예방 및 치료에 응용할 수 있을 것으로 생각된다. 연구대상은 조선대학교 부속치과병원 치주과에 내원한 환자 중 최근 2년간 144명의 환자에서 근관치료를 받았거나 받지 않았던 치아 중 임상적 및 방사선학적으로 수직 치근파절로 진단된 156개의 증례를 대상으로 하였다. 모든 불확실한 증례에서 수직 지근파절의 최종 진단은 외과적 탐지를 통해 이루어졌고, 금이 간 치아와 관련될 수 있는 치근파절의 증례의 경우는 제외되었다. 근관치료된 치아와 치료되지 않은 치아, 환자의 나이와 성별, 치아종류 및 파절된 치근부위, 자각증상의 유무를 기준으로 각각의 수치와 백분율로 분류하였다. 수직 치근파절의 증상과 증후별로 분류하였으며, 진단방법에 의한 분류, 치료방법에 따른 분류, 근관 치료 후 수직 치근파절이 발생한 기간에 따른 분류를 시행하고 통계분석을 하여 다음과 같은 결과를 얻었다. 1. 근관치료를 받지 않았던 치아의 수직 치근파절의 발생율은 58%였다. 2. 성별에 따른 발생률에 있어서 남성의 호발양상을 나타내었다. 3. 근관치료된 치아에 있어서 치료되지 않은 치아에 비해 호발연령이 낮았다. 4. 전치부의 수직 치근파절은 관찰되지 않았으며 특히, 강한 교합력을 필요로 히는 구치부에서의 높은 발생율을 나타냈다. 5. 수직 치근파절의 가장 주된 증상 및 증후는 깊은 치주낭 깊이였다. 6. 근관 치료 후 수직 치근파절이 발생한 기간은 평균 5.7년이었다. 7. 다수 증례에 있어서 3개 이하의 결손치를 가졌고, 자각증상이 나타났다. 이상의 결괴에서 한국인에 있어서 근관치료를 받지 않은 치아의 수직 치근파절은 드문 현상이 아님을 알 수 있었고 남성과 구치부에 있어서의 높은 발생율을 알 수 있었다. 그 이유로는 강한 교합력, 딱딱한 음식의 저작습관, 치조골 흡수에 따른 낮은 저항성, 골 유연성의 저하 등으로 여겨진다. 그러나, 수직 치근파절은 아직까지 정확한 진단을 내리기는 여전히 어려운 상태이며, 이를 위한 다양한 진단방법 및 더 나은 연구가 필수적이라 하겠다. 그리고, 향후 보다 많은 증례에 대한 분석, 치주질환에 이환되지 않은 경우의 분석, 치료 후 생존 기간에 대한 고찰 등도 필요하리라 사료된다.
김명준(Myoung Jun Kim),김재민(Jaemin Kim),류성욱(Sung Uk Ryu),박현식(Hyun-Sik Park),이성재(Sung-Jae Lee) 대한기계학회 2016 대한기계학회 춘추학술대회 Vol.2016 No.12
When the reactor coolant system is in high pressure condition such as station black out (SBO) accidents, the cooling water must be supplied smoothly by gravity force without active components. In accordance with these requirements, the Hybrid Safety Injection Tank (Hybrid SIT) system is suggested by the Korea Atomic Energy Research Institute (KAERI) for the passive emergency core cooling system (PECCS). The Hybrid SIT and pressurizer is connected to the pressure balancing line (PBL) to cope with high pressure accident scenarios. In order to consider the thermal-hydraulic phenomena of the Hybrid SIT, the heat transfer characteristics inside the Hybrid SIT should be evaluated. In this study, a heat transfer method using experimental data has been proposed for the quantification of heat and condensation ratio. From the analytical investigations, it is found that the wall heat transfer is the most dominant mechanism for the present Hybrid SIT.
Leader-Follower 농업용 Tracked Vehicle 개발
김정현(Jung-Hyun Kim),김명준(Myeong-Jun Kim),백선우(Sun-Woo Baek),김정하(Jung-Ha Kim) 제어로봇시스템학회 2018 제어·로봇·시스템학회 논문지 Vol.24 No.11
This paper proposes a design for a Leader-Follower tracked vehicle and its system architecture. The System consists of 3 parts: Perception, Navigation, and Control. Perception system is configured using a 1-channel LiDAR(light detection and ranging) and camera. By the use of these, Tracked vehicle recognizes the color of clothes who needs to be followed in various unstructured agricultural environments. Navigation system has been developed based on the concept of the Leader-Follower and the method of geometric path tracking (as studied in the robotics field). The vehicle can follow the Leader and be controlled by convergence of skid steering and pure pursuit (instead of using a complicated vehicle dynamics or land modeling process). The ultimate goal of this paper is explain the convergence process through formula and β compensation coefficient for steer is proposed for the formula. The β coefficient can compensate for the rotational ability of the vehicle without compensate modeling process. The influence of the β coefficient is investigated with actual tracked vehicle experiments.