http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
로타리킬론 소각로를 이용한 살가축과 사업장폐기물의 혼합소각 특성
김기헌 ( Ki Heon Kim ),정해영 ( Hae Young Jung ),김민영 ( Min Young Kim ),손준익 ( Jun Ik Son ),홍용희 ( Yong Hee Hong ),박재성 ( Jae Sung Park ) 한국폐기물자원순환학회 2013 한국폐기물자원순환학회지 Vol.30 No.4
Infections diseases in domestic animals of carcase were increasing every year. According to the monthly report for infectious disease from Ministry for Food, Agriculture, Forestry and Fisheries,11,954 heads of cattle,518,178 heads of pig,232,850,244 heads of bird were reported in 2011.Infectious diseases of carcase almost spread on a national scale. Dead or emergency preventive carcase are completely treated on bury. Since the treatment of carcase on bury are generating soil, underground water andsource water pollution, introduction of new preventive system should be considered.In this study, literature survey and studies to prevent the spreading of virus for infectious disease and second environmental pollution were investigated. The actual experiments using the existing incineration facilities were also performed to ensure the possibilities of safe treatment of carcase. On the other hand, the moving-type incineration are also being developed and its operation manual will be prepared. Among the investigated investigated incinerators, stoker type incinerator was not was not suitable for the treatment of carcase, however, other incinerators such as fluidized-bed type incinerator, rotary kiln type incinerator ware shown to be suitable. But even for the stoker type incinerator, if the pre-treatment facili-ties(grinding, crushing)are installed, it will also be a suitable method. The analytical results for air pollutants(including dioxin) emitted from the exit were all satisfied to the ail pollution emission standards.
음식물류 폐기물 건식사료의 소각을 위한 기초특성분석 연구
김기헌 ( Ki-heon Kim ),강준구 ( Jun-gu Kang ),이동진 ( Dong-jin Lee ),이원석 ( Won-seok Lee ),문희성 ( Hee-sung Moon ) 한국폐기물자원순환학회 2019 한국폐기물자원순환학회지 Vol.36 No.7
This study was to use the basic data through the analysis of physical and chemical properties of produced dry feed in facilities that using raw materials from food waste. In addition, based on the standards of solid recovered fuel (SRF) and bio-SRF, we evaluated the potential use of recycling in thermochemical processes such as incineration plants, cement plants, and power plants that can recover energy. Results from food waste analyses of three components of dry feed showed moisture content of 4.9% (content range of 0.4 ~ 8.4%), combustible content of 79.9% (75.1 ~ 86.6%) and ash content of 15.2% (12.9-16.5%). These results satisfy the SRF standards of water content of less than 10% and an ash content of less than 20%. However, the ash content of 15% partially exceeded the bio-SRF standard. Results of the elemental analyses were established to be average percentages of carbon 44.1% (41.8 ~ 46.3%), hydrogen 3.7% (3.2 ~ 4.1%), nitrogen 6.4% (6.0 ~ 6.8%), sulfur 0.29% (0.26 ~ 0.31%), and chlorine 1.35% (1.18 ~ 1.74%). All results met the SRF standards, though the bio-SRF standard of chlorine of less than 0.5% was exceeded. The average biomass content was 94.4% across facilities, although some facilities did not meet the Bio-SRF standard. Analysis of low calorific value showed that the average of 3,928 kcal/kg (3,740 ~ 4,170 kcal/kg) fulfilled this SRF standard in all facilities. Effects of the external environment on dry feeds in long term storage (for at least 8 months) were analyzed. As a result of analysis moisture content and calorific value with increased over storage time, the difference between the two parameters was undistinguished. In addition, the impact of precipitation due to weak water proof cover significantly increased the overall water content of food waste.
OWL 기반 그래픽 바이오 온톨로지 관리 시스템의 설계 및 구현
김기헌(Ki-Heon Kim),최재훈(Jae-Hun Choi),양재동(Jae-Dong Yang),박천수(Cheon-Shu Park) 한국정보과학회 2005 정보과학회논문지 : 소프트웨어 및 응용 Vol.32 No.6
본 논문에서는 OWL(Web Ontology Language) 기반 그래픽 바이오 온톨로지 관리 시스템을 설계하고 구현하였다. 이 시스템은 생물학 용어들 사이의 복잡한 의미 관계들로 구성되는 바이오 온톨로지를 본 논문에서 정의한 그래픽 표기를 이용하여 표현한다. 또한, 시각화된 환경에서 수행되는 상속과 역상속 메커니즘은 이미 구축된 방대한 용어들 사이의 관계를 시스템이 구조적으로 파악할 수 있게 함으로써, 전문가가 새로 추가되는 용어에 대한 관계를 의미적으로 일관성 있게 반자동으로 구축할 수 있다. 구축된 온톨로지는 기본적으로 OWL로 기술되며, 다른 여러 표준 온톨로지 언어(RDF/RDFS, DAML+OIL 등)로 의미적 손실 없이 변환된다. 본 시스템의 중요한 특징은 OWL의 강력한 의미적 표현력과 이를 잘 정의할수 있는 그래픽 표기법을 채택함으로써 시각화된 메커니즘을 통해 바이오 온톨로지를 정교하게 모델링할 수 있다는 점이다. In this paper, we design and implement a graphical bio-ontology management system based on OWL(Web Ontology Language). It allows domain experts to easily manage sophisticated bio-ontologies in which biological knowledge is encoded. The knowledge can be seamlessly modeled into the ontology by well defined graphical notations, which capture most of subtle semantics inherently existing between biological terms. Our system provides a new construction mechanism, which can determine a considerable part of relationships between terms by their inheritance and inverse-inheritance. For keeping their semantics to be consistent, the mechanism supplies domain experts with information available from relationships being constructed or already constructed. The constructed ontology is basically formatted by OWL, which may benefit from its powerful semantic expressiveness. Additionally, it can be automatically translated into other standard languages without semantic loss, such as RDF/RDFS, DAML+OIL and so on. The main characteristics of our system is that it enables domain experts to delicately model the bio-ontology by the visualized construction mechanisms adopting well-defined graphical notations based on OWL.
김기헌 ( Ki-heon Kim ),구경이 ( Kyong-i Ku ),정문영 ( Moon-young Chung ),최원혁 ( Won-hyuk Choi ),김원영 ( Won-young Kim ),허성진 ( Sung-jin Hur ) 한국정보처리학회 2009 한국정보처리학회 학술대회논문집 Vol.16 No.2
본 논문에서는 이동형 개인 맞춤 SW 플랫폼인 YouFree 에서 동작하는 웹 기반 SW 의 개발과 배포를 지원하는 시스템을 설계하고 구현하였다. 개발 시스템은 YouFree 의 콘텐츠를 접근하고 조작하는 API 와 자바스크립트로 구성된 웹 사용자 인터페이스를 편리하게 개발할 수 있는 UI 자동생성 기능을 제공한다. 배포 시스템은 개발된 웹 기반 SW 패키지를 설치하고 제거하는 기능뿐만 아니라 의존성 있는 패키지가 함께 설치되는 기능과 새 버전의 패키지를 업그레이드 할 수 있는 기능을 지원한다.
김기헌 ( Ki-heon Kim ),최원혁 ( Won-hyuk Choi ),김원영 ( Won-young Kim ) 한국정보처리학회 2010 한국정보처리학회 학술대회논문집 Vol.17 No.2
본 논문은 서버의 3D SW를 클라이언트에 서비스로 제공함에 있어서 실제 실행은 서버에서 이루어지지만 3D 렌더링과 결과 화면은 클라이언트의 GPU로 처리하여 표시하는 GPU 가상화 기반 3D 원격 렌더링 시스템을 설계하고 구현한 것이다. 3D 렌더링에 클라이언트의 GPU를 이용함으로써 클라이언트 수에 비례한 서버의 성능 저하 문제를 해결할 수 있으며, 클라이언트의 GPU 성능을 충분히 이용하면서 서버의 SW를 서비스 받을 수 있는 장점을 가진다.
시소러스를 이용한 facet기반 소프트웨어 부품 검색 시스템의 설계 및 구현
김기헌(Ki Heon Kim),최재훈(Jae Hun Choi),김훈희(Hoon Hee Kim),배명남(Myung Nam Bae),양재동(Jae Dong Yang),금창섭(Chang Sup Keum) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.1B
객체 지향 소프트웨어들이 데이터베이스에 체계적으로 저장 · 관리된다면, 재사용을 통해 소프트웨어 생산성 및 품질 향상에 크게 기여할 수 있다. 기존의 부품 검색 시스템들은 분류 혹은 색인에 기반한 검색 방법을 사용한다. 분류를 기반한 검색 방법은 사용자 의도를 질의로 명확히 표현할 수 없기 때문에 사용자의 요구에 따라 부품을 검색하기 어렵다. 한편, 색인을 기반한 검색 방법은 부품의 특성을 명확히 반영할 수 있는 색인어 선정이 매우 어려우며, 질의에 표현된 탐색어와 의미적으로 일치하는 부품을 검색할 수 없다는 단점을 가지고 있다. 이러한 문제점을 보완하기 위해 본 논문에서는 시소러스를 기반한 소프트웨어 부품 검색 시스템을 설계 · 구현한다. 구현된 부품 검색 시스템은 1) facet을 기반한 검색 방법과 색인어를 기반한 검색 방법을 동시에 사용할 수 있으며, 2) 사용자 질의와 의미적으로 일치하는 부품을 검색하기 위해 시소러스를 참조하여 불리언 facet질의를 표현할 수 있도록 하였고, 3) 검색된 부품들 중에서 개발자의 요구에 가장 적합한 부품을 선정할 수 있도록 지원하는 부품 항해기능을 제공한다.