TEM 정밀 시편 제작용 몰리브덴 합금 미세 고정 부품의 제작을 위한 절삭 가공 방법에 관한 연구

김기범,이창우,이해진,함민지,김건희,Kim, Ki-Beom,Lee, Chang-Woo,Lee, Hae-Jin,Ham, Min-Ji,Kim, Gun-Hee 한국금형공학회 2017 한국금형공학회지 Vol.11 No.3

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

전자현미경을 이용한 전자재료분석

김기범,Kim, Ki-Bum 한국현미경학회 1994 Applied microscopy Vol.24 No.4

The application of TEM in investigating the evolution of microstructure during solid phase crystallization of the amorphous Si, $Si_{1-x}Ge_x,\;and\;Si_{1-x}Ge_x/Si$ films deposited on $SiO_2$ substrate, in identifying the failure mechanism of the TiN barrier layer in the Cu-metallization scheme, and in comparing the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films are discussed. First, it is identified that the evolution of microstructure in Si and $Si_{1-x}Ge_x$ alloy films strongly depends on the concentration of Ge in the film. Second, the failure mechanism of the TiN diffusion barrier in the Cu-metallization is the migration of the Cu into the Si substrate, which results in the formation of a dislocation along the Si {111} plane and precipitates (presumably $Cu_{3}Si$) around the dislocation. Finally, the microstructure of the as-deposited Cu-Cr and Cu-Ti alloy films is also quite different in these two cases. From these several cases, we demonstrate that the information which we obtained using TEM is critical in understanding the behavior of materials.

해상 탐지 영상에서의 비행체 표적 선정에 관한 연구

김기범,백인혜,권기정,Kim, Ki-Bum,Baek, In-Hye,Kwon, Ki-Jeong 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.5

We deal with the target selection in seeker-detection image through network, using the detection information from aerial vehicle and the target information from surveillance and reconnaissance system. Especially, we constrain the sea battle environment, where it is difficult to perform scene-matching rather than land. In this paper, we suggest the target selection algorithm based on the confidence estimation with respect to distance and size. In detail, we propose the generation method of reference point for distance evaluation, and we investigate the effect of pixel margin and target course for size evaluation. Finally, the proposed algorithm is simulated and analyzed through several scenarios.

전기적 방법을 이용한 실리콘 단결정 내 미세 결함의 검지

김기범,서희돈,김흥락,강성건,류근걸 ( Ki Beom Kim,Hee Don Seo,Heung Rak Kim,Sung Gun Kang,Kun Kul Ryoo ) 한국전기전자재료학회 1997 한국전기전자재료학회 추계학술대회논문집 Vol.1997 No.1

Special Report - 사이버범죄 정보분석(Intelligence) 발전 방안

김기범,Kim, Gi-Beom 한국정보통신기술협회 2014 TTA저널 Vol.153 No.-

반응성 마그네트론 스퍼터링법에 의한 Nickel Oxide 박막 제작 특성에 관한 연구

김기범,황윤식,김영식,박장식,Kim, Gi-Bum,Hwang, Yun-Sik,Kim, Yeung-Shik,Park, Jang-Sick 한국반도체디스플레이기술학회 2008 반도체디스플레이기술학회지 Vol.7 No.1

In this paper, the DE(double erosion) cathode for the reactive magnetron sputtering system is developed for high deposition rate and high target utilization efficiency. The utilization efficiency of the developed DE cathode is 22% higher than that of normal SE(single erosion) cathode. Sputtering process for the nickel oxide thin films with the DE cathode is performed under the following conditions; power with $1kW{\sim}3kW$, pressure with 4mtorr and 8mtorr, oxygen flow ratio with $0%{\sim}80%$. As a result, the hysteresis phenomenon of discharge voltage in 4mtorr is lower than that in 8mtorr and the hysteresis phenomenon of discharge voltage is getting lower as the applied power is getting higher. The structure of cross section and surface roughness of the thin films are observed by FE-SEM and AFM. The structure of cross section of the thin films is columnar and the average surface roughness under oxygen flow ratio of 0%, 52.5% and 65.0% are $2.08{\AA}$, $2.20{\AA}$ and $0.854{\AA}$, respectively.

준설토 산세척 시 염산 농도가 중금속의 정화효율 및 존재형태에 미치는 영향

김기범,최용주,Kim, Kibeum,Choi, Yongju 한국지하수토양환경학회 2020 지하수토양환경 Vol.25 No.1

In this study, the effect of hydrochloric acid (HCl) concentrations on removal efficiency and chemical forms of heavy metals in dredged sediment during acid washing was investigated. The removal efficiencies of Zn, Cu, Pb, Ni and Cd by acid washing were 18.4-92.4%, 7.2-83.7%, 9.4-75%, 8.1-53.4% and 34.4-70.8%, respectively. Overall, the removal efficiencies of heavy metals were remarkably enhanced with the increase of the acid strength. However, the removal efficiencies for 0.5 and 1.0 M HCl were comparable, and both cases met the Korean soil contamination standard. Based on the sequential extraction results, concentration of the exchangeable fraction (F1), the most labile fraction, increased whereas concentrations of the other fractions decreased with increasing acid strength. Particularly, the carbonate (F2) and Fe/Mn oxides (F3) fractions drastically decreased by using 0.5 M or 1.0 M HCl. The current study results verified that acid washing could effectively reduce heavy metal concentrations and its potential mobility in dredged sediments. However, the study also found that acid washing may cause significant increase in bioavailable fraction of heavy metals, suggesting the need to evaluate the changes in chemical forms of heavy metals by acid washing when determining the acid strength to be applied.

20년 후의 반도체 기술 및 산업 전망

김기범,박병국,한민구,Kim, Gi-Beom,Park, Byeong-Guk,Han, Min-Gu 대한전자공학회 1997 전자공학회지 Vol.24 No.4

비트코인 네크워크에서의 암호화된 봇넷 C&C 통신기법

김기범,조영호,Kim, Kibeom,Cho, Youngho 한국인터넷정보학회 2022 인터넷정보학회논문지 Vol.23 No.5

Botnets have been exploited for a variety of purposes, ranging from monetary demands to national threats, and are one of the most threatening types of attacks in the field of cybersecurity. Botnets emerged as a centralized structure in the early days and then evolved to a P2P structure. Bitcoin is the first online cryptocurrency based on blockchain technology announced by Satoshi Nakamoto in 2008 and is the most widely used cryptocurrency in the world. As the number of Bitcoin users increases, the size of Bitcoin network is also expanding. As a result, a botnet using the Bitcoin network as a C&C channel has emerged, and related research has been recently reported. In this study, we propose an encrypted botnet C&C communication mechanism and technique in the Bitcoin network and validate the proposed method by conducting performance evaluation through various experiments after building it on the Bitcoin testnet. By this research, we want to inform the possibility of botnet threats in the Bitcoin network to researchers.

대체혈액을 이용한 인공폐의 평가에 관한 연구

김기범,홍성출,김민호,정경락,이삼철,Kim K.B.,Hong S C.,Kim M.H.,Jheong G.R.,Lee S.C. 대한의용생체공학회 2000 의공학회지 Vol.21 No.3

본 연구에서는 새롭게 설계한 인공폐 모듈을 사용하여 인공폐의 효율을 평가하기 위한 압력손실과 산소전달에 대한 실험을 수행하였다. 또한 증류수, 아황산나트륨용액을 혈액대용물질로 사용하여 다른 인공폐의 성능을 평가하였다. 혈액대용물질은 압력손실과 산소운반력을 연구하는데 전혈(whole blood)에 비해 장점이 많다 즉. 이들은 상대적으로 값이 저렴하고 조절하여야 할 변수가 적다. 또한 이 용액을 사용하게 되면 탈산화장치가 필요 없으며 실험결과의 분석이 상대적으로 쉽다. 전혈과 같은 산소분압을 갖는 아황산나트륨용액을 사용하는 경우 아황산나트륨 용액의 산소전달속도는 전혈을 사용하는 경우의 산소전달속도와 거의 일치하였다. 이 실험에서 중공사모듈의 산소전달속도를 측정하는데 아황산나트륨용액이 혈액대용물질로 이용될 수 있음을 보였다. 이 인공폐 모듈에서는 용액이 중공사의 바깥쪽으로 흐르도록 설계하였는데 이 실험용 인공폐는 압력손실이 안쪽으로 흐르도록 하는 흐름에 비해 $1/3\~1/6$였다. In this paper a newly designed oxygenator module was used to perform the experiments for pressure drop and oxygen transport in order to evaluate the efficiency of the artificial lung. Also, distilled water. sodium sulfite solutions used in this experiment were evaluated for the performance of other artificial lungs. Substituted bloods have many advantages over whole blood in studying pressure drop and oxygen uptake. They are relatively inexpensive, and require fewer variables to be controlled. Furthermore, deoxygenation is not necessary when those solutions are used. In addition to these advantages. assays and interpretation of the experimental results are relatively easy. In the case of using the sodium sulfite solution having the same oxygen partial pressure as whole blood. the oxygen transfer rate of the sodium sulfite solution was basically same as that of whole blood. It was concluded in evaluating the function of artificial lungs that the sodium sulfite solution was suited for measuring oxygen transfer rate. In our module, artificial blood was flowed into the outside of hollow fiber membrane. The artificial lung created in this experiment showed that pressure drop was reduced to $1/3\~1/6$ of that compared to the inside-flow case.