http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
일축배향 기공채널과 향상된 압축강도를 갖는 다공질 알루미나/뮬라이트 층상 복합체
김규헌,김태림,김동현,윤석영,박홍채,Kim, Kyu Heon,Kim, Tae Rim,Kim, Dong Hyun,Yoon, Seog Young,Park, Hong Chae 한국세라믹학회 2014 한국세라믹학회지 Vol.51 No.1
Three-layer porous alumina-mullite composites with a symmetric gradient porosity are prepared using a controlled freeze/gel-casting method. In this work, tertiary-butyl alcohol (TBA) and coal fly ash with an appropriate addition of $Al_2O_3$ were used as the freezing vehicle and the starting material, respectively. When sintered at $1300-1500^{\circ}C$, unidirectional macro-pore channels aligned regularly along the growth direction of solid TBA were developed. Simultaneously, the pore channels were surrounded by less porous structured walls. A high degree of solid loading resulted in low porosity and a small pore size, leading to higher compressive strength. The sintered porous layered composite exhibited improved compressive strength with a slight decrease in its porosity. After sintering at $1500^{\circ}C$, the layered composite consisting of outer layers with a 50 wt% solid loading showed the highest compressive strength ($90.8{\pm}3.7MPa$) with porosity of approximately 26.4%.
동결주조 다공질 뮬라이트 세라믹스의 제조와 석탄회의 재활용
김규헌,윤석영,박홍채,Kim, Kyu Heon,Yoon, Seog Young,Park, Hong Chae 한국재료학회 2016 한국재료학회지 Vol.26 No.2
In order to fabricate porous mullite ceramics with controlled pore structure and improved mechanical strength, a freeze casting route has been processed using camphene mixed with tertiary-butyl alcohol (TBA) and coal fly ash/alumina as the solvent and the ceramic material, respectively. After sintering, the solidification characteristics of camphene and TBA solvent were evident in the pore morphology, i.e., dendritic and straight pore channels formed along the solidification directions of camphene and TBA ice, respectively, after sublimation. Also, the presence of microcracks was observed in the bodies sintered at $1500^{\circ}C$, mainly due to the difference in solidification volume change between camphene and TBA. The compressive strength of the sintered bodies was found generally to be dependent, in an inverse manner, on the porosity, which was mainly determined by the processing conditions. After sintering at $1300{\sim}1500^{\circ}C$ with 30~50 wt% solid loading, the resulting mullite ceramics showed porosity and compressive strength values in ranges of 83.8~43.1% and 3.7~206.8 MPa, respectively.
식물성 식품원료의 진위 판별을 위한 종 특이 프라이머의 개발
김규헌 ( Kyu Heon Kim ),김용상 ( Yong Sang Kim ),김미라 ( Mi Ra Kim ),이호연 ( Ho Yeon Lee ),정유경 ( Yoo Kyung Jung ),이재황 ( Jae Hwang Lee ),장혜숙 ( Hye Sook Chang ),박용춘 ( Yong Chjun Park ),김상엽 ( Sang Yub Kim ),최장덕 ( 한국산업식품공학회 2014 산업 식품공학 Vol.18 No.4
본 연구에서는 식품 중 식물성 식품원료의 진위 판별을 위하여 분자생물학적 기법을 이용한 판별법을 개발하였다. 종 판별을 위한 유전자로 엽록체에 존재하는 matK 유전자와 핵 내에 존재하는 ITS 유전자 부분을 대상으로 하였으며, 가공식품에의 적용을 고려하여 PCR 산물의 크기는 200 bp 내외가 되도록 종 특이 프라이머(species-specific primer)를 설계하였다. 대상종으로는 버섯류 6종(팽이버섯, 표고버섯, 양송이버섯, 영지버섯, 새송이버섯 및 느타리버섯), 견과류 3종(밤, 잣 및 호두), 과실류 1종(대추), 채소류 6종(알로에, 미나리, 부추, 오이, 고추냉이 및 겨자), 콩류 2종(녹두, 팥) 및 기타 3종(과라나, 흰민들레 및 민들레), 총 21종을 선정하였으며, 종 특이 프라이머를 이용하여 예상되는 PCR 산물의 생성 유무를 확인하였다. PCR 분석 결과, 21종의 식물성 식품원료에 대하여 각각 예상된 PCR 산물을 확인하였으며, 프라이머별로 비교종에서 비 특이적 PCR 산물(non-specific PCR product)이 생성되지 않음을 확인하였다. 본 연구에서 개발된 종 특이 프라이머는 가열 및 가공된 식품 중 21종의 식물성 식품원료의 진위 판별에 이용될 것이며, 불량식품 근절에 적극 활용될 것으로 기대된다. In this study, a detection method was developed and optimized using a molecular biological technique to distinguish 21 vegetable food raw materials. The genes for the distinction of species in the raw materials were targeted at Internal Transcribed Spacer (ITS) in nucleus and the Maturase K (matK) gene in chloroplasts. The species-specific primers were designed for PCR products around 200 bp for their application to processed products. The amplicon size for the following: Winter mushrooms, Shiitakes, Button mushrooms, Lacquer tops, King oyster mushrooms, Oyster mushrooms, Chestnuts, Pine nuts, Walnuts, Aloe, Water dropwort, Scallions, Chinese chives, Cucumbers, Horseradish, Mustard, Mung beans, Red beans, Guarana, Korean dandelions, and Dandelions were confirmed at 166 bp ~ 245 bp, respectively. Non-specific PCR products were not detected in similar species by the species-specific primers. The detection method of raw materials developed in this study would be applied to food safety management for the eradication of adulterated food distribution and protection of consumers’ rights.
GPS를 이용한 실시간 사용자 커뮤니티 서비스 설계 및 구현
김규헌(Gue-heon Kim),김현필(Hyun-pil Kim),김환(Hwan Kim),권영미(Youngmi Kwon) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.1
본 연구에서는 위치인식 기술의 대표적인 기술 중 하나인 GPS를 이용하여 유비쿼터스 서비스를 제공해 주는 사용자 참여 서비스 시스템을 구현하였다. 사용자 참여 서비스 시스템은 인터넷 연결이 가능한 단말기를 통해 현재 위치의 정보를 한눈에 파악하여 주변의 정보획득 및 사용자 참여를 통한 실시간 정보공유를 할 수 있도록 해준다. GPS를 이용한 실시간 사용자 참여 서비스를 위해서 하드웨어 GPS와 범용적으로 사용이 가능한 단말과의 인터페이스를 위해 Bluetooth와의 통신, 그리고 웹서버 응용프로그램을 개발하였다. 제안하는 시스템은 일정주기로 현재위치공간의 상태를 사용자의 단말에 업데이트 할 뿐 아니라, 사용자가 원할 때 웹서버 응용프로그램을 통하여 현재의 상황을 실시간으로 확인 할 수 있는 양방향 인터페이스를 제공한다. 수집된 공간 정보는 일정기간 데이터베이스에 저장함으로써, 시간 혹은 공간별 사용자의 취미, 기억에 대한 메모 등의 관심사를 단말기를 통해 수시로 설정 및 변경한 정보를 공유할 수 있도록 구현하였다. 본 연구에서 개발한 시스템은 학교 내의 지리정보를 입력하였으며, 단말기를 통하여 서비스를 제공함으로써 실용성을 확인하였다.
Co - occurrence matrix 기반 비데오 영상 검색
김규헌(Kyuheon Kim),정세윤(Se-Yoon Jung),전병태(Byeong Tae Chun),이재연(Jaeyeon Lee),배영래(Younglae Bae) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.2Ⅱ
Multimedia data is now one of the widely used information in all the fields as the fast developments of computer techniques have been made. Traditional database systems based on textual information have limitations when applied to multimedia information. This is because simple textual descriptions are ambiguous and inadequate for searching multimedia information for multimedia databases and digital libraries. Thus, especially for image data, which is one of the important multimedia information types, there have been recently considerable interests in content-based image retrieval techniques, which can retrieve and browse image data on the basis of pictorial queries. Therefore, this paper presents an efficient method for describing texture information in image data.
컴프레서용 극수변환 단상유도전동기의 권선배치 최적화에 관한 연구
김규헌 ( Gyu-heon Kim ),정태욱 ( Tae-uk Jung ) 한국산업융합학회 2021 한국산업융합학회 논문집 Vol.24 No.2
Methods of speed control of single-phase inuction motor include pole change and frequency control. Pole change method that is controlling the speed by converting the number of poles of the motor using only simple pole change device has lower capability of speed control than method of frequency control. However pole change method is more economical than method of frequency control because it has low manufacturing cost. In this paper we propose a method of improving the operating capability of 2-pole/4-pole using pole change method different from conventional method and the operating capability for each number of poles applied with the winding arrangement method is verified through finite element analysis.