http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
되메움재 특성을 고려한 전력구 열환경 변화 예측 수치해석모델 개발
김경훈,박상우,김민주,이대수,최항석,Kim, Gyeonghun,Park, Sangwoo,Kim, Min-Ju,Lee, Dae-Soo,Choi, Hangseok 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.2
최근 전력구 지중 송전선의 허용 전류용량에 대한 정부규제로 인해 전력구 공사에 현장 되메움재의 열적 거동에 대한 연구가 중요해졌다. 점차 증대되는 고용량 전력공급에 대한 수요와 더불어, 허용 전류용량을 산정하기 위해, 전력 케이블 주변 온도 증가를 유발하는 요인을 예측하고 분석하는 것이 시급하다. 전력구 내부의 과도한 열확산으로 인한 지중 송전선로 주변의 온도 증가는 지중 송전선 자체의 열저항을 증가시켜 절연 파괴 및 열 폭주 현상을 야기한다. 따라서 전력구 설계 및 시공시, 되메움재에 따른 전력구 현장 열거동 메커니즘을 규명하는 것이 매우 중요하다. 본 논문에서는 현장 시험시공을 기반으로, 전력구내부와 주변지반의 온도 변화 및 열저항을 산정하기 위한 수치해석 모델을 개발하였다. 전력구 열거동 파악을 위한 수치해석은 현장시험 시공시 획득한 4개의 다른 종류의 되메움재의 열적 그리고 물리적 물성치를 기반으로 수행되었다. 또한, 실내 시험을 통해 산정한 각 되메움재의 열저항을 수치해석 모델에 입력변수로 적용했다. 전력구 내부에 일정한 열량이 공급될 때, 되메움재의 단위중량, 함수비, 열적 특성 등 여러 변수를 고려한 열거동 메카니즘을 모사할 수 있도록 열거동 수치해석 모델을 구성하고 1년 동안의 수행된 현장계측값과 비교를 통하여 개발된 수치해석 모델을 검증하였다. The thermal analysis of an underground power conduit for electrical cables is essential to determine their current capacity with an increasing number of demands for high-voltage underground cables. The temperature rises around a buried cable, caused by excessive heat dissipation, may increase considerably the thermal resistance of the cables, leading to the danger of "thermal runaway" or damaging to insulators. It is a key design factor to develop the mechanism on thermal behavior of backfilling materials for underground power conduits. With a full-scale field test, a numerical model was developed to estimate the temperature change as well as the thermal resistance existing between an underground power conduit and backfill materials. In comparison with the field test, the numerical model for analyzing thermal behavior depending on density, moisture content and soil constituents is verified by the one-year-long field measurement.
CNUSAIL-1 큐브위성의 자세결정 알고리듬 설계 및 성능분석
김경훈(Gyeonghun Kim),김승균(Seungkeun Kim),석진영(Jinyong Suk),김종래(Jong-Rae Kim) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.7
CNUSAIL-1은 태양돛을 탑재한 3U 크기의 큐브위성이다. 저궤도에서 태양돛을 전개하고, 이에 따른 자세와 궤도에 대한 영향을 확인하는 임무를 수행한다. 본 논문에서는 CNUSAIL-1을 위한 자세결정 알고리즘의 구현 가능성을 제시하였다. 위성의 기준센서는 태양센서, 3축 지자기센서를 이용하며, 관성센서는 MEMS 자이로센서를 사용한다. 큐브위성용 센서는 상대적으로 저가이며, 성능 및 잡음특성이 좋지 않은 단점이 있다. 따라서 자세결정 알고리즘으로 노이즈 특성을 고려할 수 있는 확장칼만필터를 적용하였다. 또한 자세결정의 결정론적 방법인 QUEST 알고리즘과 비교하여 그 타당성을 검증하였다. This paper discusses the attitude determination of the CNUSAIL-1 cube-satellite. The primary mission of the CNUSAIL-1 is sail deployment and operation in low Earth orbit, and the secondary mission is to look into influence of the sail deployment on satellite attitude and orbit. The attitude determination strategy is proposed depending on three mission phases, and its performance and applicability are verified through numerical simulations. This study considers the following sensors: Sun sensors and a three-axis magnetometer as attitude reference sensors, and a three-axis MEMS gyroscope as an inertial attitude sensor. Because sensors used for cube satellites have relatively low performances and worse noise characteristics, an Extended Kalman filter (EKF) is applied to attitude determination. Additionally, it has the merits to deal with the Gaussian noises and to predict the attitude even with no measurements from reference attitude sensors, especially in the eclipse of the cube satellite. The performance of the EKF is compared to a deterministic attitude determination technique, QUEST(QUaternion ESTimation).
태양돛 시험용 큐브위성 CNUSAIL-1의 임무 및 시스템 개념설계
구소연(Soyeon Koo),김경훈(Gyeonghun Kim),유연아(Yeona Yoo),송수아(Sua Song),김성근(Sungkeun Kim),오복영(Bockyoung Oh),우범기(Beomki Woo),한창구(Chang-Gu Han),김승균(Seungkeun Kim),석진영(Jinyoung Suk),한상혁(Sanghyuck Han),최기혁(Gi-Hyu 한국항공우주학회 2014 韓國航空宇宙學會誌 Vol.42 No.7
CNUSAIL-1은 태양돛을 탑재한 3U크기의 큐브위성이다. 주 임무는 저궤도에서 태양돛을 전개하는 것이며, 추가적으로 태양돛 전개와 태양돛 운용에 따른 위성의 자세/궤도변화를 확인하는 임무를 수행한다. 이를 위해, 위성의 각 시스템은 위성의 동적 데이터와 태양돛 작동 사진을 수집하고 지상국으로 전송한다. 본 논문에서는 이와 같은 임무를 수행하는 CNUSAIL-1의 태양돛 임무를 소개하고 시스템 개념설계 결과를 나타낸다. 탑재체인 태양돛의 구동 및 운용 원리를 구현하고, 버스시스템을 자세제어계, 통신계, 전력계, 명령 및 데이터 처리계, 구조 및 열 제어계로 나누어 개념 설계를 수행한다. The CNUSAIL-1 project aims to develop and operate a 3U-sized cube satellite with solar sail mechanism. The primary mission is to successfully deploy the solar sail in a low earth orbit, and the secondary mission is to collect the scientific data for the effect of the solar sail deployment and operation on orbit maneuver and attitude change of the cube satellite. For this, the bus system will collect and transmit the dynamic data of the satellite and the visual images of the solar sail operation. This paper describes solar sail mission and conceptual design of CNUSAIL-1. The actuation/operation of the solar sail and the bus system are preliminarily designed in terms of attitude control system, communication system, electrical power system, command and data handling system, structure and thermal control system is designed.
리눅스 멀티 패스를 위한 효율적인 A/A 패스 셀렉터의 제안
편상형(Sanghyung Pyun),석진선(Jinsun Suk),노재춘(Jaechun No),김경훈(GyeongHun Kim) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.1
대용량 데이터 처리를 위한 SAN(Storage Area Network)는 각 호스트 마다 두 대의 HBA(Host Bus Adapter)사용 하며, 한대는 Active로서 활동을 하고 다른 한대는 Active가 동작하지 않을 때를 대비하여 Standby로 사용된다. 현재 리눅스 커널에선 두 대의 HBA를 동시에 사용하여 효율성을 극대화하기 위한 멀티패스를 지원하고 있다. 데이터의 패스는 라운드 로빈 방식에 의해 수행되며 단순히 패스를 돌아가며 선택하는 방식을 사용한다. 라운드 로빈 방식의 패스 셀렉터는 워크로드의 양이 일정하지 못할 경우에는 좋지 않은 성능을 보인다. 본 논문은 워크로드의 양이 일정하지 않을 경우에도 동일한 성능을 낼 수 있는 패스 셀렉터를 제안한다.