http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서브시스템의 재사용을 위한 부품 라이브러리 구축에 관한 연구
권상원(Sangwon Kwon),이창훈(Changhun Lee),배도수(Dosoo Bae),유경재(Kyungjae Ryu),이경환(Kyungwhan Lee) 한국정보과학회 1996 한국정보과학회 학술발표논문집 Vol.23 No.2B
소프트웨어 개발의 해결책이 객체지향 방법론 및 개발을 통한 부품의 재사용이라는 인식은 이미 오래전에 형성되었다. 소프트웨어의 재사용을 위한 부품화의 기준은 물론 특정 어플리케이션에 구애되지 않은 독립된 객체로서 별 수정없이 재사용할 수 있도록 하는 것과, 객체간에 연결될 수 있는 정보를 통해 필요한 응용영역에 적절히 재사용될 수 있도록 함으로써 그 재사용율을 높이는 것이 목적이다. 본 논문에서는 기존의 객체단위의 재사용에서 객체간 관련 정보를 통해 설계구조 및 그 구조내에 연결되는 객체의 그룹을 재사용할 수 있도록 하는 서브시스템의 개념을 이용하여, 기존에 개발된 객체 단위 재사용 시스템을 서브시스템 단위로 확장하며 그에 따른 재사용 라이브러리의 관리 및 검색 기능의 확장된 구조를 제시하였다.
상용 첨착활성탄의 일산화탄소 흡착성능 및 촉매산화반응 연구
고상원 ( Sangwon Ko ),김대한 ( Dae Han Kim ),김영독 ( Young Dok Kim ),박덕신 ( Duckshin Park ),정우태 ( Woo Tae Jeong ),이덕희 ( Duck Hee Lee ),이재영 ( Jae Young Lee ),권순박 ( Soon Bark Kwon ) 한국공업화학회 2013 공업화학 Vol.24 No.5
We investigated the properties of impregnated activated carbons, a commercial adsorbent for the individual protection equipment, and examined CO adsorption and oxidation to CO2. The surface area, pore volume and pore size were measured for four commercial samples using Brunauer-Emmett-Teller/Barrett-Joyner-Halenda (BET/BJH), and atomic compositions of the sample surface were analyzed based on SEM/EDS and XPS. Impregnated activated carbons containing Mn and Cu for fire showed the catalytic CO oxidation to CO2 with a high catalytic activity (up to 99% CO2 yield), followed by the CO adsorption at an initial reaction time. On the other hand, C: for chemical biologial and radiological (CBR) samples, not including Mn, showed a lower CO conversion to CO2 (up to 60% yield) compared to that of fire samples. It was also found that a heat-treated activated carbon has a higher removal capacity both for CO and CO2 at room temperature than that of untreated carbon, which was probably due to the impurity removal in pores resulted in a detection-delay about 30 min.
에어 블로어와 흡입기능을 가진 미세먼지 흡입시스템의 최적화
정우태(Jung, Woo-Tai),권순박(Kwon, Soon-Bark),고상원(Ko, Sangwon),박덕신(Park, Duck-Shin) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.1
도시철도 터널내에 축적된 미세먼지(PM10 and PM2.5)의 제거를 위해 사용되는 분진흡입차량의 성능은 하부흡입시 스템의 설계방법에 따라 성능이 달라진다. 본 논문에서는 터널집진차량의 하부에 설치된 먼지흡입시스템의 고효율화를 위하 여 궤도의 바닥면에 쌓인 먼지를 비산시키는 압축공기 블로어와 먼지 흡입구를 동시에 가지는 모듈화된 먼지흡입구조를 제 안하였다. 흡입과 블로어의 상반된 구조를 동시에 가진 흡입시스템의 먼지유동 최적화를 위해 난류유동에 기초한 수치해석 을 수행하였다. 해석결과로 먼지흡입효율을 최대화 할 수 있는 공기 블로어의 설치각이 6° 내외에서 결정되고, 이를 적용하면 5 km/h의 청소속도를 가지는 분진흡입차량의 흡입효율을 10%이상 높일 수 있음을 확인하였다. The performance of track cleaning trains to remove accumulated fine particulate matter in subway tunnels depends on the design of the suction system equipped under the train. To increase the efficiency of the suction system under the cleaning vehicle, this paper proposes a novel dust suction module equipped with both air blowing nozzles and a dust suction structure. Computational Fluid Dynamics (CFD) analysis with turbulent flow was conducted to optimize the dust suction system with a particle intake and blowing function. The optimal angle of the air blowing nozzle to maximize the dust removal rate was found to be 6 degrees. The performance of the track cleaning vehicle can be increased by at least 10 percent under an operation speed of 5km/h.
權南勳,高祥原 한국국제경제학회 2004 국제경제연구 Vol.10 No.2
본 논문에서는 정부가 기업을 대상으로 지출하는 연구개발 직접 보조금이 기업의 자체적 연구개발 투자를 촉진하는 지에 대하여 고정효과 모형 및 Difference-in-Differences(DID) 모형을 이용하여 실증적으로 분석하였다. 그 결과, 정부의 연구개발 직접 보조금은 정책당국의 기대와는 달리 기업의 자체 연구개발비에 대하여 구축(crowding out) 효과를 가지는 것으로 분석되었다. 정부 연구개발 보조금을 수령하였다는 사실의 순 효과는 평균적으로 자체부담연구개발비를 22.6% 줄이는 것으로 나타났으며, 보조금 규모를 100만원 늘림에 따라서 약33만 원의 자체부담 연구개발비가 줄어드는 것으로 예측되었다. 이러한 결과는 정부가 연구개발 보조금을 기업에게 직접 지원하는 방식의 정책이 유효한 가, 또는 정부의 연구개발 보조금 지원과정이 효율적인 지에 대한 심각한 의문을 제기한다. This paper empirically investigates whether government direct subsidies stimulate or displace corporate R&D investments using a fixed-effects panel regression model and a difference-in-differences model. It turns out that government subsidies crowd out 22.6% of corporate R&D investments on average. Also, increasing subsidies by one million won is expected to displace one third of one million won from a firm's own R&D investments. These results cast serious doubts on the recent tendency of increasing direct R&D subsidies as well as the efficiency of the granting process.